Druckrohre und Armaturen - Seite 33

Viega 2315XL

Sanpress Inox T-piece with SC-Contur- steel non-corroding- press connectors, Rp-threadComponentsEPDM sealing elements, polygond1: 18, Rp: 12, d2: 18

Press connector system with press connectors and pipes made of stainless steel material Nos. 1.4401 and 1.4521 in acc. with DIN EN 10088, DIN EN 10312, DVGW worksheet GW 541, system certification for connectors and pipes in acc. with DVGW worksheet W 534, for drinking water installations in acc. with DIN 1988. For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly.Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionSealing elementsEPDM, black (ethylene-propylene-die

Viega 2315

Sanpress Inox Adapter elbow 90° with SC-Contur- steel non-corroding- press connection, Rp-threadComponentsEPDM sealing elementd: 15, Rp: 12

Viega 2318

Press connector system with press connectors made of copper and gunmetal tested in acc. with DVGW worksheet W 534 with DVGW test seal and pipes made of copper in acc. with EN 1057 in acc. with DVGW worksheet GW 392.Suitable for drinking water installations in acc. with DIN 1988.For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly.Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionSealing elementsEPDM, black (ethylene-propylene-dien-monomer rubber), up to 110 °C

Profipress T-Stück mit SC-Contur-Kupferpressverbindern, Komponenten EPDM-Dichtelemente, VdS-Zertifizierung d1: 28, d2: 22, d3: 28

Viega 2415.1

Viega 2415

Profipress T-Stück mit SC-Contur-Kupferpressverbindern, Komponenten EPDM-Dichtelemente d1: 15, d2: 15, d3: 15

Viega 2616

Viega 2416.1

Viega 2616

Viega 2318XL

Viega 2612

Profipress T-Stück mit SC-Contur-Kupferpressverbindern, Komponenten EPDM-Dichtelemente d1: 22, d2: 18, d3: 22

Sanpress T-Stück mit SC-Contur- Gunmetal oder Siliziumbronze- PressverbindernKomponentenEPDM-Dichtelemented1: 35, d2: 15, d3: 35

Viega 2318

Viega 2326

Viega 2318

Sanpress Inox Adapter mit SC-Contur-Stahl, nicht korrodierender Pressverbindung, R-Gewindekomponenten EPDM-Dichtelement, Polygon, VdS-Zertifizierung d: 28, R: 34

Geberit 20305 Ablauf- und Entlüftungsarmatur (DVW)

Geberit 23307 Ablauf- und Entlüftungsarmatur (DVW)

Geberit 23107 Ablauf- und Entlüftungsarmatur (DVW)