Viega Druckrohre und Armaturen - Seite 3

Viega 1115XL

Sanpress XL Adapter with SC-Contur- gunmetal- press connection, R-threadComponentsEPDM sealing element, cutting ringd: 88,9, R: 3

Press connector system with press connectors made of copper and gunmetal tested in acc. with DVGW worksheet W 534 with DVGW test seal and pipes made of copper in acc. with EN 1057 in acc. with DVGW worksheet GW 392.Suitable for drinking water installations in acc. with DIN 1988.For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly.Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionSealing elementsEPDM, black (ethylene-propylene-dien-monomer rubber), up to 110 °C

Viega 2318

Sanpress Inox T-piece with SC-Contur- steel non-corroding- press connectors, Rp-threadComponentsEPDM sealing elements, polygon, VdS certificationd1: 54, Rp: 12, d2: 54

Sanpress Inox Adapter elbow 90° with SC-Contur- steel non-corroding- press connection, Rp-thread, polygonComponentsEPDM sealing elementd: 15, Rp: 12

Sanpress Inox Reduzierstück mit SC-Contur - Stahl nicht korrodierend - Steckende, Pressanschlusskomponenten EPDM-Dichtelement d1: 18, d2: 15

Press connector system with press connectors and pipes made of stainless steel material Nos. 1.4401 and 1.4521 in acc. with DIN EN 10088, DIN EN 10312, DVGW worksheet GW 541, system certification for connectors and pipes in acc. with DVGW worksheet W 534, for drinking water installations in acc. with DIN 1988. For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly.Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionSealing elementsEPDM, black (ethylene-propylene-die

Sanpress Inox T-Stück mit SC-Contur- Stahl nicht korrodierend - PressverbindernKomponentenEPDM-Dichtelemented1: 28, d2: 15, d3: 28

Viega 2311

Press connector system with press connectors and pipes made of stainless steel material Nos. 1.4401 and 1.4521 in acc. with DIN EN 10088, DIN EN 10312, DVGW worksheet GW 541, system certification for connectors and pipes in acc. with DVGW worksheet W 534, for drinking water installations in acc. with DIN 1988. For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly.Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionSealing elementsEPDM, black (ethylene-propylene-die

Viega 2612

Sanpress Inox Adapter mit SC-Contur-Stahl, nicht korrodierender Pressverbindung, R-Gewindekomponenten EPDM-Dichtelement, Polygon, VdS-Zertifizierung d: 28, R: 34

Viega 2311

Viega 2311

Pressverbindungssystem mit Pressverbindern aus Kupfer und Rotguss, geprüft gemäß DVGW-Arbeitsblatt W 534 mit DVGW-Prüfsiegel und Rohren aus Kupfer gemäß EN 1057 in Übereinstimmung mit dem DVGW-Arbeitsblatt GW 392. Geeignet für Trinkwasserinstallationen gemäß DIN 1988. Für dimensionsstabile verdeckte und Vorwandinstallationen von Sammel- und Steigleitungen im Viega-Komponentensystem. Pressverbinder Alle Größen mit SC-Contur - Verbindungen, die ungedrückt bleiben, werden sichtbar, wenn das System gefüllt ist. Der SC-Contur ist zertifiziert und erfüllt die Anforderungen des DVGW-Arbeitsblatts W 534, Punkt 12.14, Verbindungen mit Zwangsleckage. Bei Dichtheitsprüfungen mit Wasser garantiert Viega die Identifizierung ungedrückter Verbindungen im Druckbereich von 0,1 MPa bis 0,65 MPa; bei einer trockenen Dichtheitsprüfung mit Druckluft oder Edelgasen von 22 hPa bis zu einem Druck von maximal 0,3 MPa.MarkingGreen dot on the press connectionSealing elementsEPDM (Ethylen-Propylen-Dien-Monomer-Kautschuk), schwarz bis zu einer Temperatur von 110 °C

Press connector system with press connectors made of copper and gunmetal tested in acc. with DVGW worksheet W 534 with DVGW test seal and pipes made of copper in acc. with EN 1057 in acc. with DVGW worksheet GW 392.Suitable for drinking water installations in acc. with DIN 1988.For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly.Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionSealing elementsEPDM, black (ethylene-propylene-dien-monomer rubber), up to 110 °C

Viega 2415

Viega 2415

Viega 2415

Viega 2415.2

Viega 2428

Viega 2326

Sanpress Inox T-piece with SC-Contur- steel non-corroding- press connectors, Rp-threadComponentsEPDM sealing elements, polygond1: 18, Rp: 34, d2: 18

Viega 2326