Viega Druckrohre und Armaturen - Seite 18

Sanpress Inox Adapter elbow 90° with SC-Contur- steel non-corroding- press connection, R-threadComponentsEPDM sealing element, polygon, VdS certificationd: 22, R: 34

Viega 2212

Forcing plug- for leakage test, temporarily closed pipeline section- brass- compression fitting, hose connection for filling hoseComponentsKFE tap, union nut screw fittingd: 28

Viega 2212

Viega 2212

Sanpress Inox Adapter elbow 90° with SC-Contur- steel non-corroding- press connection, Rp-threadComponentsEPM sealing element, VdS certificationd: 22, Rp: 34

Viega 2326.1

Viega 2326

Viega 2326.1

Viega 2326.1

Viega 2316

Press connector system with press connectors and pipes made of stainless steel material Nos. 1.4401 and 1.4521 in acc. with DIN EN 10088, DIN EN 10312, DVGW worksheet GW 541, system certification for connectors and pipes in acc. with DVGW worksheet W 534, for drinking water installations in acc. with DIN 1988. For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly.Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionSealing elementsEPDM, black (ethylene-propylene-die

Sanpress Inox T-piece with SC-Contur- steel non-corroding- press connectors, Rp-threadComponentsEPDM sealing elements, polygond1: 15, Rp: 12, d2: 15

Sanpress Inox T-Stück mit SC-Contur- Stahl nicht korrodierend - PressverbindernKomponentenEPDM-Dichtelemented1: 28, d2: 18, d3: 28

Sanpress Inox T-piece with SC-Contur- steel non-corroding- press connectors, Rp-threadComponentsEPDM sealing elements, polygon, VdS certificationd1: 22, Rp: 34, d2: 22

Viega 2315.1

Viega 2318

Sanpress Inox Reducer with SC-Contur- steel non-corroding- plug-in end, press connectionComponentsEPDM sealing element, VdS certificationd1: 54, d2: 28

Viega 2317.2

Sanpress Inox Kupplung mit SC-Contur - nicht korrodierender Stahl - Pressverbinder, Komponenten EPDM-Dichtelemente d: 54 (VdS-Zertifizierung)

Sanpress Inox T-Stück mit SC-Contur- Stahl nicht korrodierend - PressverbindernKomponentenEPDM-Dichtelemente, VdS-Zertifizierungd1: 42, d2: 22, d3: 42

Sanpress Inox T-piece with SC-Contur- steel non-corroding- press connectors, Rp-threadComponentsEPDM sealing elements, polygon, VdS certificationd1: 28, Rp: 34, d2: 28

Sanpress Inox Reducer with SC-Contur- steel non-corroding- plug-in end, press connectionComponentsEPDM sealing element, VdS certificationd1: 54, d2: 42

Sanpress Inox T-piece with SC-Contur- steel non-corroding- press connectorsComponentsEPDM sealing elements, VdS certificationd1: 42, d2: 28, d3: 42

Viega 2317.2