CPU Kühler - Seite 15

Wärmeleitpad Thermal Grizzly Minus Pad extreme 2 bietet eine herausragende Wärmeleitfähigkeit bei niedrigem thermischen Übergangswiderstand für Hochleistungs-Kühlanwendungen.

Thermal Grizzly Minus Pad extreme 2 ist dafür ausgelegt, dank einer Partikelmischung aus Aluminiumoxid, Aluminiumhydroxid und Aluminiumpulver selbst kleinste Spalte zu füllen und so eine optimale Wärmeübertragung zwischen Wärmequelle und Kühler zu unterstützen. Seine weiche Konsistenz passt sich gut an Oberflächen an, ist dabei elektrisch nicht leitend und bleibt stabil, ohne mit der Zeit auszuhärten oder fest zu werden.

• Herausragende Wärmeleitfähigkeit
• Niedriger thermischer Übergangswiderstand
• Weiches Pad passt sich den Oberflächen von Wärmequelle und Kühler an
• Elektrisch nicht leitend
• Härtet nicht aus und wird mit der Zeit nicht fest

Ideal für anspruchsvolle Builds, bei denen zuverlässiger Kontakt und effiziente Wärmeübertragung wichtig sind.

Wärmeleitpad Thermal Grizzly Minus Pad extreme 2 bietet herausragende Wärmeleitfähigkeit und einen niedrigen thermischen Übergangswiderstand für Hochleistungsanwendungen.

Thermal Grizzly Minus Pad extreme 2 ist dafür ausgelegt, dank einer Zusammensetzung aus Aluminiumoxid, Aluminiumhydroxid und Aluminiumpulver selbst kleinste Spalte mit wärmeleitenden Partikeln zu füllen und so eine optimale Wärmeübertragung zwischen Wärmequelle und Kühler zu fördern.

• Optimierte Materialzusammensetzung für niedrigen thermischen Übergangswiderstand
• Weiche Konsistenz passt sich Kontaktflächen gut an
• Elektrisch nicht leitend
• Härtet oder verfestigt sich im Laufe der Zeit nicht, auch bei längerer Nutzung

Zuverlässige Wärmeleit-Interface-Leistung für anspruchsvolle Kühl-Setups.

Thermal pads offering improved thermal conductivity, high compressibility and electrical non-conductivity for reliable heat transfer on SSDs, GPU coolers and electronic components.

The Minus Pad Advance series refines proven Minus Pad technology to deliver easy-to-use, conformable pads that enhance heat transfer while remaining electrically non-conductive.

• Excellent thermal conductivity


• High compressibility for gap filling


• Electrically non-conductive


• Easy to use


• Suitable for SSDs, GPU coolers, GPU water coolers, voltage regulators and memory modules


• Black color

Designed to improve thermal contact between components and heatsinks for more consistent cooling performance.

Thermal pads offer extremely high thermal conductivity, outstanding compressibility, electrical insulation, and straightforward installation for efficient component cooling.

The Minus Pad Pro is the Pro-series thermal pad refined from the Minus Pad 8 to deliver improved thermal conductivity and compressibility for SSDs, GPU coolers, water blocks and electronic components.

• Excellent thermal conductivity


• Outstanding compressibility for tight contact


• Electrically non-conductive


• Easy to apply


• Suitable for SSDs, GPU coolers, GPU water coolers, voltage regulators and memory modules

Designed to enhance heat transfer between components and cooling solutions in compact assemblies.

The graphene thermal pads of the Thermal Grizzly KryoSheet series can be used as an excellent alternative for thermal compounds from the higher performance segment. Similar to Carbonaut pads, they have a conformable surface with very high thermal conductivity. Compared to Carbonaut pads, KryoSheet as a high-end product offers significantly higher thermal conductivity.

This increased thermal conductivity is not only due to the choice of material, but also to the innovative manufacturing process. KryoSheet does not contain any liquid components and is therefore not subject to normal ageing as is the case with traditional thermal paste. Drying out is not possible.

 

• Outstanding thermal conductivity
• Easy to use
• Consistently high performance
• Extreme durability

Attention: Electrically conductive! Follow instructions!

Wärmeleitpaste, Grau

Thermo-Pad

Wärmeleitpaste

Wärmeleitpaste, Grau

Wärmeleitpaste

Thermal pads offering extremely high thermal conductivity, outstanding compressibility and electrically non-conductive properties for use on SSDs, GPU coolers and electronic components.

The Minus Pad Pro combines excellent heat transfer with exceptional compressibility while remaining electrically non-conductive, making it suitable for cooling SSDs, GPU coolers, GPU water coolers, voltage regulators and memory modules.

• Excellent thermal conductivity


• Outstanding compressibility for tight contact


• Electrically non-conductive for safe use on electronics


• Easy to use


• Designed for SSDs, GPU coolers, GPU water coolers, voltage regulators and memory modules

Based on the proven Minus Pad 8 and developed to further improve thermal conductivity and compressibility for reliable component cooling.

Thermal Grizzly Minus Pad Extreme is a great choice for applications where renewing thermal paste is not an option. This is particularly useful when distances between the heat source and the heat sink need to be bridged - for example with memory chips and voltage converters. The silicone-based thermal pad has a consistency similar to modeling clay. Compared to Minus pad 8 the thermal conductivity was improved by about 260 %.

• Most excellent thermal conductivity
• No bleeding
• long-term stability
• high compression rate

The minus pad extreme is available in size 120 x 20 mm and 100 x 100 mm with thicknesses of 0,5mm, 1mm, 1,5mm, 2mm, 3mm. See variants for various sizes and thickness. 

NB: Due to the consistency only one-time use is recommended 

Water cooler optimized for Intel LGA1851 direct-die mounting with a nickel-plated copper microfin cold plate, low-flow-resistance jet channels and integrated RGB lighting.

The Intel 1851 Mycro Direct-Die Pro RGB V1 is designed to sit directly on a delidded Intel CPU to send heat straight into the water loop, with an acrylic-and-aluminum cover and controllable ARGB illumination.

• Direct-die installation for LGA1851 CPUs — requires removal of the ILM and CPU heatspreader; delidding is at your own risk


• Nickel-plated copper cold plate with microfins and a jet system, engineered for low flow resistance


• Acrylic layer tempered after milling to prevent stress cracks beneath the anodized aluminum lid


• Digital aRGB LEDs under the lid, controllable via a 3-pin ARGB header (+5V/DATA/GND); LEDs also illuminate the G1/4 fittings


• G1/4-inch female threading for standard fittings


• Tested with KryoSheet and thermal pads — additional pad thickness affected contact pressure and showed no significant temperature improvements

Built for users who want a compact direct cooling path from the CPU die into a water loop while retaining customizable RGB lighting.

Thermal Grizzly Minus Pad Extreme is a great choice for applications where renewing thermal paste is not an option. This is particularly useful when distances between the heat source and the heat sink need to be bridged - for example with memory chips and voltage converters. The silicone-based thermal pad has a consistency similar to modeling clay. Compared to Minus pad 8 the thermal conductivity was improved by about 260 %.

• Most excellent thermal conductivity
• No bleeding
• long-term stability
• high compression rate

The minus pad extreme is available in size 120 x 20 mm and 100 x 100 mm with thicknesses of 0,5mm, 1mm, 1,5mm, 2mm, 3mm. See variants for various sizes and thickness. 

NB: Due to the consistency only one-time use is recommended 

CPU-Kühler, wasserkühlsystem, passt zu AMD Socket AM4 / AM5 & Intel Socket LGA1150 / LGA1151 / LGA1155 / LGA1156 / LGA1200 / LGA1700 / LGA1851, Kühler Geräuschpegel: max 23.46 dBA, Kühler-RPM: 5001800 ± 10%, Kühler CFM: max 58.03, statischer Druck: max 2.4 mmH₂O, PWM-gesteuert, 394mm radiator mit 3 x 120mm RGB Kühler, 4-Pins PWM & 3-Pins ARGB Anschluss, inkl. Kühlpaste, schwarz•

CPU-Kühler, wasserkühlsystem, passt zu AMD Socket AM4 / AM5 / TR4 / sTRX4 & Intel Socket LGA1150 / LGA1151 / LGA1155 / LGA1156 / LGA1200 / LGA1700 / LGA1851 / LGA2011 / LGA2011-V2 / LGA2066, Geräuschpegel: max 32.9 dBA (Kühler) / max 19 dBA (pumpen), Kühler-RPM: 5002250 ± 10%, Kühler CFM: max 85.85, statischer Druck: max 3.27 mmH₂O, PWM-gesteuert, 282mm radiator mit 2 x 120mm RGB Kühler, 4-Pins PWM & 3-Pins ARGB Anschluss, inkl. Kühlpaste, schwarz mit RGB (kontrolliert von: ASUS AURA / Asrock Polychrome Sync / Gigabyte Fusion / MSI Mystic Light)•

Prozessor-Flüssigkeitskühlsystem, Kühlergröße: 360 mm, (für: LGA4677, SP6, sTR5), Nickelbeschichtete Kupferbasis, 120 mm, Schwarz

CPU-Kühler, luft-Kühler, passt zu AMD Socket AM4 / AM5 & Intel Socket LGA1150 / LGA1151 / LGA1155 / LGA1156 / LGA1200, Geräuschpegel: max 29.3 dBA, Luftstrom: 58-06 - 61.25 CFM, statischer Druck: max 3.76 mmH₂O, Kühler-RPM: 500 - 1450 ± 10%, PWM-gesteuert, 4-Pins PWM Anschluss, 2 x 120mm Kühler, 7 Heatpipes, Kühlerhöhe: 164mm, inkl. Kühlpaste, Farbe: weiß

CPU-Kühler, wasserkühlsystem, passt zu AMD Socket AM4 / AM5 & Intel Socket LGA1150 / LGA1151 / LGA1155 / LGA1156 / LGA1200 / LGA1700 / LGA1851, pumpen: Asetek 8th Gen V2 Pump , Geräuschpegel: max 27.86 dBA (Kühler) / max 25.3 dBA (pumpen), Kühler-RPM: 8003600 ± 10%, Kühler CFM: max 66.09, PWM-gesteuert, 360mm radiator mit 3 x 120mm Kühler, max TDP 320, 4-Pins PWM & 3-Pins ARGB Anschluss, inkl. Kühlpaste, eingebauter Bildschirm eingebauter Bildschirm, schwarz•

Prozessor-Flüssigkeitskühlsystem, (für: LGA115x Socket, LGA1200, LGA1700, LGA1851, AM4, AM5), Kupfer, 120 mm, Schwarz

CPU-Kühler, luft-Kühler, passt zu AMD Socket AM4 / AM5 & Intel Socket LGA1150 / LGA1151 / LGA1155 / LGA1156 / LGA1200 / LGA1700 / LGA1851, Geräuschpegel: max 28.2 dBA, Luftstrom: max 68.0 CFM, statischer Druck: max 2.21 mmH₂O, Kühler-RPM: - max 2000 ± 10%, PWM-gesteuert, 4-Pins PWM & 3-Pins ARGB Anschluss, 1 x 120mm Kühler, 6 Heatpipes, Kühlerhöhe: 156mm, inkl. Kühlpaste, Farbe: weiß mit RGB

Wärmeleitpaste, High-Performance

Prozessor-Flüssigkeitskühlsystem, 240mm, (für: LGA1150, LGA1151, LGA1155, LGA1200, LGA1700, LGA2066, LGA2011-3, LGA2011 (Square ILM), LGA2011-3 (Square ILM), AM4, AM5, LGA2011), Kupfer, 120 mm, Komplett Schwarz

CPU-Kühler, luft-Kühler, passt zu AMD Socket AM4 / AM5 & Intel Socket LGA1150 / LGA1151 / LGA1155 / LGA1156 / LGA1200 / LGA1700 / LGA1851, Geräuschpegel: max 31.45 dBA, Luftstrom: max 63.4 CFM, statischer Druck: max 3.33 mmH₂O, Kühler-RPM: - max 2200 ± 10%, PWM-gesteuert, 4-Pins PWM Anschluss, 1 x 120mm Kühler, 4 Heatpipes, Kühlerhöhe: 156mm, Farbe: weiß / Holz

Thermo-Pad, Schwarz (Packung mit 2)