Bohrer & Bits - Seite 62

Polierfilz, für Edelstahl, nicht eisenhaltiges Metall, Stahlplatten, Farbe auf Holz, 115 mm, rund, Körnung: sehr fein, 115 mm

Bosch Schrauberbit extra-hart. Anzahl der bits: 3 Stück(e), Schraubendreher-Bits enthalten: Schlitz, Schlitz-Schraubendreherbits (metrisch): 5.5 mm. Länge (mm): 49 mm. Schaftgröße: 25,4 / 4 mm (1 / 4"), Schaftform: Hexagonal, Verpackungsart: Sichtverpackung• S2-modifizierter Stahl und optimierter Wärmebehandlungsprozess für überdurchschnittliche Härte und angemessene Leistung• Die konische Torsionszone des Bits verarbeitet Drehmomentspitzen gut, und bewältigt Aufgaben aller Art• Sechskantschaft für eine starke Verbindung und maximale Drehmomentübertragung in Dreibackenfuttern und 1/4-Zoll-Innensechskant-Werkzeughaltern• 3 Stück(e)• Schlitz• Material: Stahl• Schaft

Meißel, für Beton, Ziegelsteine, Vollziegel, Betonblocksteine, Kalksandstein, Kalkstein, flach, 10 Stücke, SDS-max, Länge: 400 mm

Bosch Schrauberbit extra-hart. Anzahl der bits: 10 Stück(e), Schraubendreher-Bits enthalten: Phillips, Phillips Schraubendreher-Bits: PH 1. Länge (mm): 25 mm. Schaftgröße: 25,4 / 4 mm (1 / 4"), Schaftform: Hexagonal, Verpackungsart: Sichtverpackung• S2-modifizierter Stahl und optimierter Wärmebehandlungsprozess für überdurchschnittliche Härte und angemessene Leistung• Die konische Torsionszone des Bits verarbeitet Drehmomentspitzen gut, und bewältigt Aufgaben aller Art• Sechskantschaft für eine starke Verbindung und maximale Drehmomentübertragung in Dreibackenfuttern und 1/4-Zoll-Innensechskant-Werkzeughaltern• 10 Stück(e)• Phillips• Material: Stahl• Schaft

Bosch Schrauberbit extra-hart. Anzahl der bits: 25 Stück(e), Schraubendreher-Bits enthalten: Phillips, Phillips Schraubendreher-Bits: PH 1. Länge (mm): 25 mm. Schaftgröße: 25,4 / 4 mm (1 / 4"), Schaftform: Hexagonal, Verpackungsart: Polybag• S2-modifizierter Stahl und optimierter Wärmebehandlungsprozess für überdurchschnittliche Härte und angemessene Leistung• Die konische Torsionszone des Bits verarbeitet Drehmomentspitzen gut, und bewältigt Aufgaben aller Art• Sechskantschaft für eine starke Verbindung und maximale Drehmomentübertragung in Dreibackenfuttern und 1/4-Zoll-Innensechskant-Werkzeughaltern• 25 Stück(e)• Phillips• Material: Stahl• Schaft

Bohrer, für Metall, 2.5 mm, Länge: 57 mm

Bosch Schrauberbit extra-hart. Anzahl der bits: 100 Stück(e), Schraubendreher-Bits enthalten: Phillips, Phillips Schraubendreher-Bits: PH 3. Länge (mm): 25 mm. Schaftgröße: 25,4 / 4 mm (1 / 4"), Schaftform: Hexagonal, Verpackungsart: Polybag• S2-modifizierter Stahl und optimierter Wärmebehandlungsprozess für überdurchschnittliche Härte und angemessene Leistung• Die konische Torsionszone des Bits verarbeitet Drehmomentspitzen gut, und bewältigt Aufgaben aller Art• Sechskantschaft für eine starke Verbindung und maximale Drehmomentübertragung in Dreibackenfuttern und 1/4-Zoll-Innensechskant-Werkzeughaltern• 100 Stück(e)• Phillips• Material: Stahl• Schaft

Extended torsion zone for extreme robustness for long-lasting work
Modified S2 steel and optimised heat treatment process provides extra durability for high performance

Chisel, for concrete, masonry, flat, SDS-plus, length: 250 mm, width: 20 mm, for Makita DHK180Z, DHR243RTJ, DHR243Z

Bohrer, für Beton, Mauerwerk, Stein, Stahlbeton, Ziegelsteine, Beton mit Stahlamierung, Hammereinsatz, 6 mm, SDS-plus, Länge: 265 mm, für XGT HR008GM202

Meißel, für Beton, Stahlbeton, Ziegelsteine, poröser Beton, Putz, Kalksandstein, flach, SDS-plus, Länge: 200 mm, Breite: 38 mm, für Makita HK0500, HR003, HR004GM202, HR007GM201; XGT HR002GZ05, HR007, HR007GM201, HR008GM202

Bohrer, für Metall, 1.5 mm, Länge: 40 mm, für Makita DHP482RTJ

It has a 1/4 in. External hex shank for use with drill drivers, screwdrivers and especially impact screwdrivers. The very robust Impact Control screwdriver bit is even suitable for the high torque of impact screwdrivers. The special torsion zone gives the bit an extremely high durability for continuous use, the S2-modified steel and the optimized heat treatment process enable maximum performance under the harshest conditions. This product is perfectly suitable for heavy tasks such as extensive assembly or heavy industrial work.

Makita Bohrhammer-Set SDS-Plus 13-teilig

The SDS plus-5 drill bit ensures problem-free drilling. The grooved carbide tip with notches ensures smooth drilling and easily penetrates the material without getting stuck, even in concrete. The Activeteq centering tip guides the drill position from the start without shaking or displacement and ensures precise hole diameter. AWB soldering and hardening technology reduces vibration during drilling work, so the user is not burdened. The drill bit is suitable for masonry and concrete. The visible wear indicator shows if the hole diameter is still within tolerance when inserting dowels. The drill head is PGM certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, accurate drilling, and efficient fastening. The drill head is made in Germany. Compatible with SDS plus holder rotary hammers.
Package of 1 piece.

The CYL-3 drill bit ensures long-lasting performance when drilling in concrete. The wear-resistant drill bit is made of a special carbide material developed and produced by Bosch. The material is designed to withstand frequent use and provides extra durability for tasks in concrete. The drill bit's efficient U-shape with 2 flutes ensures effective dust removal, less friction, reduced heat development and wear, and extends the life of the drill bit. The drill bit provides long-lasting performance when drilling fastening holes in abrasive materials such as concrete and natural stone. The drill bit is PGM-certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, precise drilling, and efficient fastening. The drill bit is compatible with the cylindrical shank system for all powered and battery-powered hammer drills.
Package with 1 piece.

4 - 4.5 - 5 - 6 -7 - 8 - 9 - 10 - 11 - 12mm
3/8"

The HSS spiral drill with PointTeQ allows for fast drilling in metal thanks to the shape of the tip with PointTeQ. It is quick and easy to start drilling, as the self-centering tip prevents wandering. Due to the increased drilling speed, less heat and wear are generated. The PointTeQ tip design ensures that it remains sharp and has a long lifespan. This drill is suitable for drilling in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron, and plastic. There is low risk of breakage, especially for drills with a diameter under 6 mm since they are made with an extremely flexible core. Its black oxide coating ensures quick chip removal. The HSS PointTeQ spiral drill is manufactured according to DIN 338 standards. The drill type is N (notched angle) with a 135-degree point angle. It has a cylindrical shank system (the shank has the same diameter as hammer drills) and is intended for use in drill stands and screwdrivers.
Package of 10 pieces.

The CYL-3 drill bit ensures long-lasting performance when drilling in concrete. The wear-resistant drill head is made of a special carbide material developed and produced by Bosch. The material is designed to withstand frequent use and provides extra durability for tasks in concrete. The drill head's efficient U-shape with 2 notches ensures effective dust removal, less friction, reduced heat generation and wear, extending the life of the bit. The drill bit provides long-lasting performance when drilling fastening holes in abrasive materials such as concrete and natural stone. The drill head is PGM certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, precise drilling and efficient fastening. The drill head is compatible with the cylindrical shank system for all powered and battery-powered hammer drills.
Package contains 1 piece.

The ground HSS spiral drill bit for drilling through metal with maximum precision. The exposed 135-degree split self-centering tip of the drill head combines active cutting with perfect centering without displacement for maximum precision. With the split tip, it is also unnecessary to mark center points in advance or pilot drill up to 10 mm. This precision-ground drill head, made of HSS (high-speed steel), provides up to 40% faster drilling and up to 50% lower clamping pressure than standard ground HSS cutting edge drill heads. This drill head is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, reduced cast iron, non-ferrous metals and hard plastic. The ground HSS spiral drill bit is manufactured according to DIN 338. The type N (notch angle) of the borehead has a 135-degree tip and a diameter tolerance of h8. It has a cylindrical shaft system (the shaft has the same diameter as the borehead) and is intended for use in drilling stands and screwdrivers.
Package with 10 pieces.

It has an external hexagonal shaft of 1/4 inch and is intended for universal mounting of screws with screwdrivers and screw machines. This Extra Hard screwdriver bit is a good choice for versatile use. All tasks can be performed thanks to the bit's modified S2 steel and an optimized heat treatment process, which provides extra hard quality and enables sufficient performance in all tasks. The tapered torsion zone of the bit easily handles maximum circumferential speeds when absorbing force and vibrations during screw assembly, making it suitable for all tasks. Screwdriver bit pack extra hard (PH) with 3 pieces

The drill chuck with key is a simple and secure solution for attaching drills to all tasks. With uniform clamping force for secure attachment of drills with cylindrical or hexagonal shank. The jaws are easily tightened and loosened with a key, which provides easy handling. Drill chucks with keys are available in different holders (1/2" - 20, 3/8" - 24, 5/8" - 16, B16 and SDS plus) for a wide range of capacities and are compatible with most common drills. See the technical information to learn more about impact resistance or suitability for counterclockwise rotation.
Hammer-resistant design

It has an external hexagonal shaft of 1/4 inch and is intended for universal mounting of screws with screwdrivers and screw machines. This Extra Hard screwdriver bit is a good choice for versatile use. All tasks can be performed thanks to the bit's modified S2 steel and an optimized heat treatment process, which provides extra hard quality and enables sufficient performance in all tasks. The bit's tapered torsion zone easily handles maximum circumferential speeds when absorbing force and vibrations during screw assembly, making it suitable for all tasks

The SDS max-9 Stone drill bit has a long lifespan in stone. The drill bit has two main cutting edges and two robust side bolts, which extend the lifespan. The drill bit is made of a high-quality, wear-resistant carbide material that ensures long life and great durability. The vibration-optimized design with 2+2 grooves also ensures optimal power transmission during drilling. The drill bit is intended for drilling in stone. The drill bit is PGM certified by the PGM Masonry Drill Bit Association Board and guarantees tight tolerances, precise drilling, and efficient fastening. It is compatible with all SDS max holders on rotary hammers.
Package contains 1 piece.