Bohrer & Bits - Seite 61

Impakt-Schraubendreherbit, 2 Stücke, phillips, PH2, Inbus, Länge: 50 mm, für Makita DTD172Z

Bohrersatz, für Spanplatte, Sperrholz, Weichholz, Hartholz, furniertes Holz, Forstnerbohrer, 5 Stücke, 5 mm, 6 mm, 8 mm, 10 mm, 4 mm, für Makita DDF487, DDF487RAJ, DDF487RFE3, DDF487Z, DHP487RAJ; LXT DDF487RTJ

Bohrer, für Beton, Mauerwerk, Stein, Stahlbeton, Ziegelsteine, Beton mit Stahlamierung, Hammereinsatz, 6 mm, SDS-plus, Länge: 265 mm, für XGT HR008GM202

Bosch 2 608 597 652 Bohrer

Bosch HSS Twist Drill Bits PointTeQ

Wera 853/4 ACR SL Schraubenziehereinsatz 1 Stück(e)

Bohrer, für Granit, Festbeton, Gneis, ausgehärteter Stahlbeton, Hammereinsatz, 22 mm, SDS-plus, Länge: 1000 mm

Bohrer, für Granit, Festbeton, Gneis, ausgehärteter Stahlbeton, Hammereinsatz, 20 mm, SDS-plus, Länge: 600 mm

IRWIN 10501925 Bohrer Spiralbohrer-Bit

Bosch Schrauberbit extra-hart

Bosch HSS Spiralbohrer PointTeQ

Multifunktions-Bohrer zum Bohren von Metall, Holz, Stein und mehr 14.0x160x10

Murborsäten Größen: Ø4-5-6-8-10 mm Aus Karbonstahl gefertigt

The CYL-3 drill bit ensures long-lasting performance when drilling in concrete. The wear-resistant drill bit is made of a special carbide material developed and produced by Bosch. The material is designed to withstand frequent use and provides extra durability for tasks in concrete. The drill bit's efficient U-shape with 2 flutes ensures effective dust removal, less friction, reduced heat development and wear, and extends the life of the drill bit. The drill bit provides long-lasting performance when drilling fastening holes in abrasive materials such as concrete and natural stone. The drill bit is PGM-certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, precise drilling, and efficient fastening. The drill bit is compatible with the cylindrical shank system for all powered and battery-powered hammer drills.
Package with 1 piece.

Bosch Schrauberbit extra-hart

Bohrer, für Beton, Stahlbeton, Granit, Festbeton, Gneis, Hammereinsatz, 25 mm, SDS-plus, Länge: 450 mm

The long ground HSS spiral drill bit for drilling deep holes through metal with maximum precision. Its length allows for deep drilling with this long drill head. The drill head's exposed 135-degree two-part self-centering tip combines active cutting with perfect centering without displacement for maximum precision. With the two-part tip, it is also unnecessary to mark pilot holes in advance or pilot bore up to 10 mm. This precision-ground drill head, made of HSS (high-speed steel), provides up to 40% faster drilling and up to 50% lower clamping pressure than standard ground HSS cutting edge drill heads. The long ground HSS spiral drill bit is manufactured according to DIN 340. The drill head is of type N (not angle) with a 135-degree tip and a diameter tolerance of h8. This drill head is designed for drilling deep holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, reduced cast iron, non-ferrous metals and hard plastic. It has a cylindrical shaft system (the shaft has the same diameter as the drill head) and is intended for use in boring stands and screwdrivers
Package with one piece.

The CYL-5 drill bit head guarantees extra long lifespan when drilling in concrete and stone. The carbide material developed by Bosch, combined with diamond-ground cutting edges, provides an extremely durable drill bit head. The variable design with 2 flutes and a short, variable pitch significantly reduces flute friction and ensures effective dust removal and less wear. The Bosch Power Grip shank system enables 100% power transfer from the machine to the drill bit head. This means that the power is optimally utilized directly for drilling tasks, and reduced power loss results in less wear. For drilling fixing holes in concrete, natural stone, and artificial stone materials. The drill bit head is PGM certified by the PGM Masonry Drill Bit Association Board which guarantees tight tolerances, accurate boreholes, and efficient fastening. The drill bit head is compatible with cylindrical shank systems for all powered or battery-powered hammer drills.
Package of 1 piece.

Fräs-Bitsatz, für Holz, Kunststoff, Holzfaserplatte, Schleifmittel, Gipskartonplatten, weiche Wandfliesen, 5 Stücke, 3.17 mm, Länge: 70 mm

The SDS plus-3 drill bit has long durability when drilling in reinforced concrete. The Dura design with four grooves ensures increased durability with effective dust removal and reduced heat development. The drill bit is made of high-alloy steel with optimized hardening technology, which increases wear resistance. The serrated cutting edges are made of an extra robust carbide material developed and produced by Bosch. The drill bit is PGM certified by the PGM Masonry Drill Bit Association Board and guarantees tight tolerances, precise drilling, and efficient fastening. The drill bit is intended for drilling in concrete and masonry together with SDS plus holders for rotary hammers.
Package contains 1 piece.

Bohrer, Spiralbohrer, 14 mm, zylindrisch, Länge: 600 mm

The HSS spiral drill with PointTeQ allows for fast drilling in metal thanks to the design of the tip with PointTeQ. It is quick and easy to start drilling as the self-centering tip prevents wandering. Due to the increased drilling speed, less heat and wear are generated. The PointTeQ tip design ensures that it remains sharp and has a long lifespan. This drill is suitable for drilling in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron, and plastic. There is low risk of breakage, especially for drills with a diameter under 6 mm as they are made with an extremely flexible core. Its black oxide coating ensures quick chip removal. The HSS PointTeQ spiral drill is manufactured according to DIN 338 standards. The drill type is N (angle of flute) with a 135-degree point angle. It has a cylindrical shank system (the shank has the same diameter as hammer drills) and is intended for use in pillar drills or screwdrivers.
Pack of 5 pieces.