Bosch Bohrer & Bits - Seite 32

Bohrer, für Weichholz, Hartholz, Brad-Point-Bohrer, 14 mm, zylindrisch, Länge: 151 mm

Bohrer, Spiralbohrer, 4,2 mm, H8, zylindrisch, Länge: 75 mm

The long ground HSS spiral drill bit for drilling deep holes through metal with maximum precision. Its length allows for deep drilling with this long drill head. The exposed 135-degree two-part self-centering tip of the drill head combines active cutting with perfect centering without displacement for maximum precision. With the two-part tip, it is also unnecessary to mark pilot holes in advance or pilot bore up to 10 mm. This precision-ground drill head, made of HSS (high-speed steel), provides up to 40% faster drilling and up to 50% lower clamping pressure than standard ground HSS cutting edge drill heads. The long ground HSS spiral drill bit is manufactured according to DIN 340. The drill head is of type N (not angle) with a 135-degree tip and a diameter tolerance of h8. This drill head is designed for drilling deep holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, reduced cast iron, non-ferrous metals and hard plastic. It has a cylindrical shaft system (the shaft has the same diameter as the drill head) and is intended for use in drilling stands and screwdrivers
Package contains one piece.

The long ground HSS spiral drill bit for drilling deep holes through metal with maximum precision. Its length allows for deep drilling with this long drill head. The drill head's exposed 135-degree two-part self-centering tip combines active cutting with perfect centering without displacement for maximum precision. With the two-part tip, it is also unnecessary to mark pilot holes in advance or pilot bore up to 10 mm. This precision-ground drill head, made of HSS (high-speed steel), provides up to 40% faster drilling and up to 50% lower clamping pressure than standard ground HSS cutting edge drill heads. The long ground HSS spiral drill bit is manufactured according to DIN 340. The drill head is of type N (not angle) with a 135-degree tip and a diameter tolerance of h8. This drill head is designed for drilling deep holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, reduced cast iron, non-ferrous metals and hard plastic. It has a cylindrical shaft system (the shaft has the same diameter as the drill head) and is intended for use in boring stands and screwdrivers
Package with one piece.

The CYL-3 drill bit ensures long-lasting performance when drilling in concrete. The wear-resistant drill bit is made of a special carbide material developed and produced by Bosch. The material is designed to withstand frequent use and provides extra durability for tasks in concrete. The drill bit's efficient U-shape with 2 flutes ensures effective dust removal, less friction, reduced heat development and wear, and extends the life of the drill bit. The drill bit provides long-lasting performance when drilling fastening holes in abrasive materials such as concrete and natural stone. The drill bit is PGM-certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, precise drilling, and efficient fastening. The drill bit is compatible with the cylindrical shank system for all powered and battery-powered hammer drills.
Package with 1 piece.

The drill bit has a hexagonal shaft system and is compatible with all screwdrivers with a 13 mm chuck. The spiral drill bit is suitable for quick and precise drilling when drilling through holes, pre-drilling for rafter nails, and drilling deep dowel holes in wood. The powerful self-feeding tip pulls the bit all the way through, ensuring fast and precise drilling with low power consumption. The optimized low-friction geometry of the bit with solid core ensures straight holes, high chip removal, and higher working speed. The optimized guide edge of the bit and precision-ground head cutting edge produce precise holes. Suitable for use in construction trades, by carpenters and roofers, it is suitable for both softwood and hardwood
Total length 600 mm

Bohrer, für Kunststoff, Buntmetall, Gusseisen, Stahlguß, legierter Stahl, unlegierter Stahl, Spiralbohrer 18 mm zylindrisch

Bohrer, Spiralbohrer, 10,5 mm, zylindrisch, Länge: 133 mm

It has an external hexagonal shaft of 1/4 inch and is intended for universal mounting of screws with screwdrivers and screw machines. This Extra Hard screwdriver bit is a good choice for versatile use. All tasks can be performed thanks to the bit's modified S2 steel and an optimized heat treatment process, which provides extra hard quality and enables sufficient performance in all tasks. The bit's tapered torsion zone easily handles maximum circumferential speeds when absorbing force and vibrations during screw assembly, making it suitable for all tasks

This drill bit is compatible with a 1/4 inch hexagonal shaft system for versatile use with screwdrivers, impact wrenches and drilling rigs. The Impact Control HSS spiral drill bit provides extremely robust drilling in metal, especially with screwdrivers. The extremely strong core is extremely robust. The spiral hammer drill bit is precision ground from solid metal and has an oxidized notch that gives it outstanding surface quality for cutting through materials with reduced wear. It is suitable for use on alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, non-ferrous metals, sheet metal and plastic.
Package of 1 piece.

The SDS plus-5 drill head guarantees trouble-free drilling. The grooved carbide tip with notches ensures smooth drilling and easily penetrates the material without getting stuck, even in concrete. The Activeteq centering tip guides the drill position from the start without shaking or displacement and ensures precise hole diameter. AWB soldering and hardening technology reduces vibration during drilling, so the user is not burdened. The drill is suitable for masonry and concrete. The visible wear indicator shows if the hole diameter is still within tolerance when inserting dowels. The drill head is PGM certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, accurate drilling, and efficient fastening. The drill head is made in Germany. Compatible with SDS plus holder rotary hammers.
Package of 1 piece.

The SDS plus-5 drill bit ensures problem-free drilling. The grooved carbide tip with notches ensures smooth drilling and easily penetrates the material without getting stuck, even in concrete. The Activeteq centering tip guides the drill position from the start without shaking or displacement and ensures precise hole diameter. AWB soldering and hardening technology reduces vibration during drilling, so the user is not burdened. The drill bit is suitable for masonry and concrete. The visible wear indicator shows if the hole diameter is still within tolerance when inserting dowels. The drill head is PGM certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, accurate drilling, and efficient fastening. The drill head is made in Germany. Compatible with SDS plus holder rotary hammers.
Package of 1 piece.

It has an external hexagonal shaft of 1/4 inch and is intended for universal mounting of screws with screwdrivers and screw machines. This Extra Hard screwdriver bit is a good choice for versatile use. All tasks can be performed thanks to the bit's modified S2 steel and an optimized heat treatment process, which provides extra hard quality and enables sufficient performance in all tasks. The bit's tapered torsion zone easily handles maximum circumferential speeds when absorbing force and vibrations during screw assembly, making it suitable for all tasks

The HSS spiral drill with PointTeQ allows for fast drilling in metal thanks to the design of the tip with PointTeQ. It is quick and easy to start drilling as the self-centering tip prevents wandering. Due to the increased drilling speed, less heat and wear are generated. The PointTeQ tip design ensures that it remains sharp and has a long lifespan. This drill is suitable for drilling in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron, and plastic. There is low risk of breakage, especially for drills with a diameter under 6 mm as they are made with an extremely flexible core. Its black oxide coating ensures fast chip removal. The HSS PointTeQ spiral drill is manufactured according to DIN 338 standards. The drill type is N (angle of flute) with a 135-degree point angle. It has a cylindrical shank system (the shank has the same diameter as hammer drills) and is intended for use in pillar drills or screwdrivers.
Pack of 10 pieces.

The HSS spiral drill with PointTeQ allows for fast drilling in metal thanks to the design of the tip with PointTeQ. It is quick and easy to start drilling as the self-centering tip prevents wandering. Due to the increased drilling speed, less heat and wear are generated. The PointTeQ tip design ensures that it remains sharp and has a long lifespan. This drill is suitable for drilling in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron, and plastic. There is low risk of breakage, especially for drills with a diameter under 6 mm as they are made with an extremely flexible core. Its black oxide coating ensures fast chip removal. The HSS PointTeQ spiral drill is manufactured according to DIN 338 standards. The drill type is N (angle of flute) with a 135-degree point angle. It has a cylindrical shank system (the shank has the same diameter as hammer drills) and is intended for use in pillar drills or screwdrivers.
Pack of 10 pieces.

Der selbstspannende Bohrfutter ist für Bosch-Hammerbohrer vorgesehen. Das selbstspannende Bohrfutter ist ein Bosch-System-Bohrfutter mit einer Spannkraft von Ø 1,5 bis 13 mm. Es zieht den Bohrer leicht fest und erfordert keinen Schlüssel. Der selbstspannende Bohrfutter ist für Bosch-Hammerbohrer vorgesehen. Selbstspannendes Bohrfutter, verchromt

Drill bit, for concrete, masonry, hammer bit, 26 mm, SDS-plus, length: 450 mm

Die Bohrerspitze hat ein sechseckiges Schaftsystem und ist kompatibel mit allen Schraubendrehern mit einem 13 mm Spannfutter. Der Spiralbohrer eignet sich für schnelles und präzises Bohren beim Durchbohren von Löchern, Vorbohren für Sparrennägel und Bohren von tiefen Dübel-Löchern in Holz. Die leistungsstarke selbstfütternde Spitze zieht den Bohrer durch, um schnelles und präzises Bohren bei geringem Stromverbrauch zu gewährleisten. Die optimierte Niedrigreibungsgeometrie des Bits mit massivem Kern sorgt für gerade Löcher, hohe Späneentfernung und höhere Arbeitsgeschwindigkeit. Der optimierte Führungskantenbereich des Bits sowie die präzisionsgeschliffene Kopfschneidekante erzeugen genaue Löcher. Geeignet für den Einsatz im Bauhandwerk, Zimmerer-, Dachdecker-und ist sowohl für Weichholz als auch Hartholz geeignet.Spiralbohrerset mit 6 Stück

Drill bit, for concrete, masonry, hammer bit, 24 mm, SDS-plus, length: 450 mm

Bosch 2609255020