Bosch Bohrer & Bits - Seite 51

Bosch HSS Spiralbohrer PointTeQ

Bohrer-Set, Spiralbohrer, 18 Stücke

Bosch HSS Spiralbohrer PointTeQ

Drill bit, taper bit, 22 mm, cylindrical, length: 600 mm

The HSS spiral drill PointTeQ with a hexagonal shaft provides fast results when drilling in metal. As it is developed for fast drilling, it generates minimal heat with reduced wear on the drill bit, and the PointTeQ tip ensures consistent sharpness and long durability. The self-centering tip prevents wandering and ensures quick and easy starting, and the black oxide channel quickly removes chips. The hexagonal shaft makes the drill very stable with a secure locking between the drill bit and chuck, which strengthens the core of the drill bit and reduces the risk of breakage for bits with a diameter under 6 mm, thereby achieving even greater reliability. This PointTeQ drill is suitable for drilling in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron, and plastic. With HSS spiral drills PointTeQ active cutting is achieved along with perfect centering thanks to its two-part tip design. It is type N (drill point) with 135° point angle manufactured according to DIN 338 standards. It is compatible with 1/4 inch hexagonal shank systems for use with impact wrenches , screwdrivers ,and drilling machines .

Bohrer, für Beton, Kunststoff, Stahl, Weichholz, weiche Fliesen, Multimaterial, 9 mm, zylindrisch, Länge: 120 mm

Torx-Schraubendreherbit-Set, 3-teilig, für Innen-Torx-Schrauben (T), mit T8-, T10- und T15-Bits mit 89 mm Länge und 1/4" Außensechskant-Schaft (ISO 1173 E6.3).

3-teiliges Schraubendreherbit-Set für Innen-Torx-Schrauben (T) ist für Torx-Schraubenköpfe ausgelegt und wird mit einem standardisierten 1/4" Außensechskant-Schaft für Kompatibilität mit passenden Bithaltern und Werkzeugen geliefert.

• Set-Inhalt: T8, T10, T15
• Länge: 89 mm
• Schafttyp: 1/4" Außensechskant, ISO 1173 E6.3

Bohrer, für Holz, Spanplatte, Weichholz, Spanplatte, Forstnerbohrer, 19 mm, Inbus, Länge: 152 mm

Bohrer, Hammereinsatz, 6.5 mm, SDS-plus, Länge: 315 mm

Bohrer, Hammereinsatz, 14 mm, SDS-plus, Länge: 265 mm

Bohrer, für Granit, Festbeton, Gneis, ausgehärteter Stahlbeton, Hammereinsatz, 20 mm, SDS-plus, Länge: 600 mm

Bohrer, für Stahlbeton, Granit, Festbeton, ausgehärteter Beton, Gneis, Hammereinsatz, 3.5 mm, SDS-plus, Länge: 115 mm

Bohrer, für Beton, Mauerwerk, Stahlbeton, Granit, Gneis, Hammereinsatz, 20 mm, SDS-plus, Länge: 250 mm

Bohrer, für Holz, Spanplatte, Weichholz, Spanplatte, Forstnerbohrer, 24 mm, Inbus, Länge: 152 mm

The CYL-5 drill bit head guarantees extra long lifespan when drilling in concrete and stone. The Bosch-developed carbide material combined with diamond-ground cutting edges provides an extremely durable drill bit head. The variable design with 2 flutes and short, variable pitch significantly reduces flute friction and ensures efficient dust removal and less wear. The Bosch Power Grip shank system enables 100% power transmission from the machine to the drill bit head, so that the power is optimally utilized directly for the drilling task, and reduced power loss means less wear. For drilling fixing holes in concrete, natural stone, and artificial stone material. The drill bit head is PGM-certified by the PGM Masonry Drill Bit Association Board and guarantees tight tolerances, accurate boreholes, and effective fastening. The drill bit head is compatible with the cylindrical shank system for all powered and battery-powered hammer drills.
Package of 1 piece.

The CYL-3 drill bit ensures long-lasting performance when drilling in concrete. The wear-resistant drill head is made of a special carbide material developed and produced by Bosch. The material is designed to withstand frequent use and provides extra durability for tasks in concrete. The drill head's efficient U-shape with 2 notches ensures effective dust removal, less friction, reduced heat generation and wear, extending the life of the bit. The drill bit provides long-lasting performance when drilling fastening holes in abrasive materials such as concrete and natural stone. The drill head is PGM certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, precise drilling and efficient fastening. The drill head is compatible with the cylindrical shank system for all powered and battery-powered hammer drills.
Package contains 1 piece.

The HSS spiral drill with PointTeQ allows for fast drilling in metal thanks to the shape of the tip with PointTeQ. It is quick and easy to start drilling, as the self-centering tip prevents wandering. Due to the increased drilling speed, less heat and wear are generated. The PointTeQ tip design ensures that it remains sharp and has a long lifespan. This drill is suitable for drilling in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron, and plastic. There is low risk of breakage, especially for drills with a diameter under 6 mm since they are made with an extremely flexible core. Its black oxide coating ensures quick chip removal. The HSS PointTeQ spiral drill is manufactured according to DIN 338 standards. The drill type is N (notched angle) with a 135-degree point angle. It has a cylindrical shank system (the same diameter as hammer drills) and is intended for use in drill stands and screwdrivers.
Pack of 10 pieces.

The HSS spiral drill with PointTeQ allows for fast drilling in metal thanks to the shape of the tip with PointTeQ. It is quick and easy to start drilling, as the self-centering tip prevents wandering. Due to the increased drilling speed, less heat and wear are generated. The PointTeQ tip design ensures that it remains sharp and has a long lifespan. This drill is suitable for drilling in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron, and plastic. There is low risk of breakage, especially for drills with a diameter under 6 mm since they are made with an extremely flexible core. Its black oxide coating ensures quick chip removal. The HSS PointTeQ spiral drill is manufactured according to DIN 338 standards. The drill type is N (notched angle) with a 135-degree point angle. It has a cylindrical shank system (the shank has the same diameter as hammer drills) and is intended for use in drill stands and screwdrivers.
Package of 10 pieces.

Universalbohrer-Set umfasst 4 Bosch Bohrer in 4.0x75, 5.0x85, 6.0x100 und 8.0x120 für vielseitige Bohrarbeiten in Stein, Mauerwerk, Fliesen, Holz, Stahl/Eisen und Beton einschließlich Stahlbeton.

Bosch 4-piece Universal drill bit set ist dafür ausgelegt, eine breite Materialpalette zu bearbeiten—von Feinsteinzeug und Dachziegeln bis hin zu Akustikplatten und Bewehrungsstahl—und ist damit ein praktisches Set für gemischte Bohrarbeiten.

Bosch HSS Spiralbohrer PointTeQ

Bosch HSS Spiralbohrer PointTeQ

The HSS spiral drill with PointTeQ allows for fast drilling in metal thanks to the design of the tip with PointTeQ. It is quick and easy to start drilling as the self-centering tip prevents wandering. Due to the increased drilling speed, less heat and wear are generated. The PointTeQ tip design ensures that it remains sharp and has a long lifespan. This drill is suitable for drilling in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron, and plastic. There is low risk of breakage, especially for drills with a diameter under 6 mm as they are made with an extremely flexible core. Its black oxide coating ensures fast chip removal. The HSS PointTeQ spiral drill is manufactured according to DIN 338 standards. The drill type is N (angle of flute) with a 135-degree point angle. It has a cylindrical shank system (the shank has the same diameter as hammer drills) and is intended for use in pillar drills or screwdrivers.
Pack of 10 pieces.

Hartmetallbestückte Lochsäge mit 67 mm Durchmesser, ausgelegt zum Bohren in Stein- und Mauerwerksmaterialien einschließlich Keramik, Fliesen, Dachziegel, Marmor, Bodenfliesen und Klinker.

Hartmetallbestückte Lochsäge liefert einen präzisen 67 mm Schnitt über eine breite Palette harter Oberflächen und eignet sich für Arbeiten im Stein- und Fliesenbereich, bei denen saubere kreisrunde Öffnungen benötigt werden.

Bosch Schrauberbit extra-hart

Bohrer, für Beton, Mauerwerk, Stahlbeton, Granit, Gneis, Hammereinsatz, 16 mm, SDS-plus, Länge: 315 mm