Alu pex Systeme - Seite 4

Raxofix Adapter with SC-Contur- for all Viega metallic systems- silicium bronze- press connectorsComponentsEPDM sealing elementd1: 16, d2: 15

Raxofix Adapter mit SC-Contur für alle Viega-Metallsysteme - Siliziumbronze - PressverbindungenKomponentenEPDM-Dichtelementd1: 20, d2: 15

Flow-optimised press connector system for drinking water installations in acc. with DIN 1988 and DIN 50930-6 as well as heating installations, tested in acc. with DVGW worksheet W 534.Press connectorsSafe and fast processing without calibration of the pipe ends through O-ring-free press technology in all dimensions. In this way, widening or calibration of the pipe-ends becomes superfluous and reduces the assembly times. The interaction between aerodynamic radii and minimal cross-section narrowings ensure the lowest pressure losses in press systems for multilayer pipes. This allows a smaller dimensioning of drinking water installations and reduces the pipeline volume.SC-ConturAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionPipesRaxofix PE-Xc/Al/PE-Xc•dimensionally stable, oxygen-proof in acc. with DIN 4726, greyRaxofix PE-Xc•flexible, blackDimensionsPress connectors and pipes•Raxofix-PE-Xc/Al/PE-Xc: d 16/20/25/32/40/50/63•Raxofix PE-Xc: d 16/20Areas of application PE-Xc/Al/PE-XcDrinking waterHeatingRainwaterCompressed airAreas of application PE-XcRainwaterDrinking waterUse of the system for application areas other than those described here must be agreed with Viega Service Center.Operating conditionsDrinking water installations•Operating temperature max. 70 °C•Operating pressure max. 1.0 MPaHeating installations•Operating temperature max. 80 °C•Operating pressure max. 1.0 MPaIrrelevant of the direction of flow, mixed installations are permitted.NoteThe DVGW test mark is only valid f

Drückwinkel PPSU Uponor 90° 32 mm

Uponor rs elbow rs2-rs2

Uponor 1029126 Sanitärarmatur Armaturenanschluss

Used with Roth alu-laserplus pipe and Roth tools

Used with Roth alu-laserplus pipe and Roth tools

Used with Roth alu-laserplus pipe and Roth tools

Raxofix Wall plate with SC-Contur- silicium bronze- press connection, Rp-threadd: 16, Rp: 12

Brass Press Coupling with a corrosion-resistant surface with stainless steel press cap for DHW and radiator systems, stop ring, pressure indicator, color code, guaranteed leaking if not pressed. Calibration-free.Only to be used with Uponor MLC, Uni Pipe Plus and Metallic Pipe Plus pipes and with Uponor approved press tool.

Geberit Mepla Bogenadapter 90° mit Innengewinde: d=26mm, Rp=3/4

Geberit Mepla Ellenbogen: 45°, d=26mm

Used with Roth alu-laserplus pipe and Roth tools

Uponor 1070534 Sanitärarmatur Elbow

Geberit Mepla T-Stück mit Innengewinde: d=40mm, Rp=1, d1=40mm

Used with Roth alu-laserplus pipe and Roth tools

HENCO 16X3/4 VISION Push/Eurocone für Wasser-, Heizungs- und Kühlanlagen, max. 16 bar

HENCO 16X16 mm VISION Druckgerade-Kupplung für Wasser-, Heizungs- und Kühlanlagen, max. 16 bar

Henco 63 x 63 x 63 mm PVDF Press-T-Stück für Wasser-, Heizungs- und Kühlanlagen. Max. 16 bar.

Uponor 1006641 Sanitärarmatur Kompressionsendkappe

HENCO 20X1/2 VISION Druckgerade Steckverbinder für Wasser-, Heiz- und Kühlanlagen, max. 16 bar

Henco 20 mm x 34 PVDF Pressbogen 90° für Wasser-, Heizungs- und Kühlanlagen. Max. 16 bar.

Used with Roth alu-laserplus pipe and Roth tools

Rohrhalter für Durchmesser von 16-20-26-32 mm PEX/AL/PEX