Alu pex Systeme - Seite 3

Henco PVDF Press-T-Stück mit Steckgewinde in der Mitte. 50x3/4x50. CW602.

Geberit Mepla Adapter mit Innengewinde: d=50mm, Rp=1 1/2

Geberit Mepla Adapter mit männlichem Gewinde: d=32mm, R=1

Prestee PPSU Uponor 40X40X40 mm

Used with Roth alu-laserplus pipe and Roth tools

Raxofix-Kupplung mit SC-Contur-Siliziumbronze-Presseanschluss d1: 25, d2: 20

Raxofix T-Stück mit SC-Contur- Siliciumbronze-Pressverbindern d1: 25, d2: 20, d3: 25

Raxofix T-Stück mit SC-Contur-Silicium-Bronze-Presseanschlüssen, Rp-Gewinde d1: 32, Rp: 34, d2: 32

PPSU-Kupplung Uponor 25 mm

Druckkupplung Uponor 40X32 mm.

Used with Roth alu-laserplus pipe and Roth tools

Flow-optimised press connector system for drinking water installations in acc. with DIN 1988 and DIN 50930-6 as well as heating installations, tested in acc. with DVGW worksheet W 534.Press connectorsSafe and fast processing without calibration of the pipe ends through O-ring-free press technology in all dimensions. In this way, widening or calibration of the pipe-ends becomes superfluous and reduces the assembly times. The interaction between aerodynamic radii and minimal cross-section narrowings ensure the lowest pressure losses in press systems for multilayer pipes. This allows a smaller dimensioning of drinking water installations and reduces the pipeline volume.SC-ConturAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionPipesRaxofix PE-Xc/Al/PE-Xc•dimensionally stable, oxygen-proof in acc. with DIN 4726, greyRaxofix PE-Xc•flexible, blackDimensionsPress connectors and pipes•Raxofix-PE-Xc/Al/PE-Xc: d 16/20/25/32/40/50/63•Raxofix PE-Xc: d 16/20Areas of application PE-Xc/Al/PE-XcDrinking waterHeatingRainwaterCompressed airAreas of application PE-XcRainwaterDrinking waterUse of the system for application areas other than those described here must be agreed with Viega Service Center.Operating conditionsDrinking water installations•Operating temperature max. 70 °C•Operating pressure max. 1.0 MPaHeating installations•Operating temperature max. 80 °C•Operating pressure max. 1.0 MPaIrrelevant of the direction of flow, mixed installations are permitted.NoteThe DVGW test mark is only valid f

Brass Press Coupling with a corrosion-resistant surface with stainless steel press cap for DHW and radiator systems, stop ring, pressure indicator, color code, guaranteed leaking if not pressed. Calibration-free. Cylindrical external thread according to EN 10226-1 for packing.Only to be used with Uponor MLC, Uni Pipe Plus and Metallic Pipe Plus pipes and with Uponor approved press tool.

Uponor 1070561 Sanitärarmatur Kompressions-Tee

Uponor-Form mit Dichtung 1.

Geberit Mepla T-Stück, reduziert: d=50mm, d1=32mm, d2=50mm

Uponor 1014111 Sanitärverteilerrohr

Uponor 1070533 Sanitärarmatur Elbow

Henco 20 x 16 mm PVDF Pressreduzierkupplung für Wasser-, Heiz- und Kühlanlagen. Max. 16 bar.

HENCO 26X3/4 VISION gebogener 90 Grad Adapter für Wasser-, Heizungs- und Kühlanlagen, max. 16 bar

Henco 63 x 2 x 63 mm PVDF press tee male for water-, heating- and cooling installations. Max. 16 bar.

Henco Rohrgeraderichter für 20 mm Alu-Pex

Geberit Mepla Bogenadapter 90° mit männlichem Gewinde: d=20mm, R=3/4

Uponor 1029143 Sanitärarmatur Armaturenanschluss

Henco 20 mm x 34 PVDF Pressbogen 90° für Wasser-, Heiz- und Kühlanlagen. Max. 16 bar.