Rems Werkzeuge für Sanitärarbeiten - Seite 2

REMS Sanitol – mineral oil free. Completely water soluable. High lubricating and cooling effect.Synthetic, mineral oil free thread-cutting oil. Specially for drinking water supplies. Also for universal use. For all materials.

Universal quality tool for deburring tubes and edges of different materials. Copper, steel, brass, aluminium, plastic.REMS REG Universal – the all-purpose deburrer.

REMS Pull-Push – fast clearance of blockages.Proven, reliable suction and pressure cleaning device for fast clearance of blockages.High pressing force by front, adjustable handle.Optimum adaptation to the cleaning task by 2 sleeves: Short sleeve for wash basins and baths, long sleeve for toilets.

REMS cutter wheel Cu-INOX for stainless steel pipes of pressfitting systems, copper, carbon steel

REMS pressing tongs Mini Very compact design and low weight of the REMS Mini pressing tongs due to special arrangent of the pressing tongs connection (Patent EP 1 952 948).High compression pressing tongs in forged and specially hardened steel. Pressing contours of REMS pressing tongs are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour.Drive through REMS Mini-Press ACC drive unit. Read and follow the installation and assembly instructions of the system provider/manufacturer.Traceability according to EN 1775:2007 REMS pressing tongs Mini with pressing contour M, V, SA, B, RN and UP have worked a specific marking into the pressing contour which leaves a lasting impression on the g after the pressing process. This enables the user to check again whether the most suitable pressing tongs have been used to make the pressfit connection even after the pressing process.With this traceability REMS fulfils the recommendations of the European standard EN 1775:2007 for the installation of pressfitting systems for gas.

Robust quality tools for cutting tubes. Particularly suited for cutting stainless steel tubes.Copper tubes, thin-walled stainless steel tubes, thin-walled steel, aluminium, brass tubes Ø 6 – 35 mm Ø 18 – 138Cutting wheel:4327920515REMS RAS Cu-INOX – the compact version with telescopic spindle.

Specially hardened cutter wheel in approved, tough-hard REMS die-steel quality ensures a long service life.REMS cutter wheel Cu-INOX 3 – 120, s 4Copper tubes, stainless steel tube

Powerful, easy-to-operate electric tool for threading with unique, patented support bracket. Ready for use anywhere, without vice. Ideal for repair, renovation, job site.Pipe threads 1/8–2, 16–50 mm. Bolt threads 6–30 mm, 1/4–1. Pipe threads with REMS 4 automatic die head 2 1/2–4.REMS Amigo 2 – extremely strong up to 2.Set incudes Die heads R 1/2 - 3/4 - 1 - 1.1/4 - 1.1/2 - 2

Proven quality die stock with excellent threading capabilities.Pipe threads 18 – 2, 16 – 50 mmBolt threads 6 – 30 mm, 14 – 1Set includes Die heads R 12 - 34 - 1 - 114REMS eva – the plumber’s die stock.Excellent start-cutting and threading.Steel ratchet lever, thickly plastic coated.Only one type of quick-change die heads.Indestructible quality dies.

Fast, easy deburring with 3 specially hardened and specially ground deburring blades. Robust housing in impact-resistant, robust plastic. External/internal pipe deburrer. For copper, brass, aluminium, steel, plastic pipes, Ø 3 – 35 mm, Ø 1/8 – 1 3/8".

REMS cutter wheel Cu-INOX for stainless steel pipes of pressfitting systems, copper, carbon steel

Li­Ion PLUS technology. Highly resistant Li­Ion 21,6 V battery with 2,5 Ah capacity for long service life. Powerful and light. Total discharge and overload protection with single cell monitoring. Temperature monitoring during the charging process. Operating temperature range –10 to +60 °C. No memory effect for maximum battery power

Robust quality tool for neat, fast cutting of pipes. With integrated pipe scissors for corrugated pipes. Stable execution of magnesium. For one-handed operation.
P plastic pipe, plastic pipe with metallic insert ≤ Ø 26 mm, ≤ Ø 1"
SW plastic corrugated pipe Ø 18 – 35 mm, Ø 3/4 – 1 3/8"

REMS ROS P 26/SW 35 – Fast cutting with one cut up to Ø 26 mm. With integrated pipe cutter for plastic corrugated pipe up to Ø 35 mm.

REMS pressing tongs High compression pressing tongs in forged and specially hardened steel. Pressing contours of REMS pressing tongs are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour. Hence far closer tolerances compared to as cast pressing contour.Drive through all REMS radial presses (except REMS Mini-Press ACC) and suitable radial presses of other makes. Read and follow the installation and assembly instructions of the system provider/manufacturer.Traceability according to EN 1775:2007 REMS pressing tongs/pressing rings with pressing contour M, V, SA, B, RN and UP have worked a specific marking into the pressing contour which leaves a lasting impression on the pressed fitting after the pressing process. This enables the user to check again whether the most suitable pressing tongs or the suitable pressing ring have been used to make the pressfit connection even after the pressing process.With this tracability REMS fulfills the recommendations of the European standard EN 1775:2007 for the installation of pressfitting systems for gas.

REMS pressing tongs Mini Very compact design and low weight of the REMS Mini pressing tongs due to special arrangent of the pressing tongs connection (Patent EP 1 952 948).High compression pressing tongs in forged and specially hardened steel. Pressing contours of REMS pressing tongs are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour.Drive through REMS Mini-Press ACC drive unit. Read and follow the installation and assembly instructions of the system provider/manufacturer.Traceability according to EN 1775:2007 REMS pressing tongs Mini with pressing contour M, V, SA, B, RN and UP have worked a specific marking into the pressing contour which leaves a lasting impression on the g after the pressing process. This enables the user to check again whether the most suitable pressing tongs have been used to make the pressfit connection even after the pressing process.With this traceability REMS fulfils the recommendations of the European standard EN 1775:2007 for the installation of pressfitting systems for gas.

REMS pressing tongs Mini Very compact design and low weight of the REMS Mini pressing tongs due to special arrangent of the pressing tongs connection (Patent EP 1 952 948).High compression pressing tongs in forged and specially hardened steel. Pressing contours of REMS pressing tongs are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour.Drive through REMS Mini-Press ACC drive unit. Read and follow the installation and assembly instructions of the system provider/manufacturer.Traceability according to EN 1775:2007 REMS pressing tongs Mini with pressing contour M, V, SA, B, RN and UP have worked a specific marking into the pressing contour which leaves a lasting impression on the g after the pressing process. This enables the user to check again whether the most suitable pressing tongs have been used to make the pressfit connection even after the pressing process.With this traceability REMS fulfils the recommendations of the European standard EN 1775:2007 for the installation of pressfitting systems for gas.

REMS pressing tongs MiniVery compact design and low weight of the REMS Mini pressing tongs due to special arrangent of the pressing tongs connection (Patent EP 1 952 948).High compression pressing tongs/pressing rings in forged and specially hardened steel. Pressing contours of REMS pressing tongs/pressing rings are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour.Drive through REMS Mini-Press ACC drive unit. Read and follow the installation and assembly instructions of the system provider/manufacturer.

REMS pressing tongs Mini Very compact design and low weight of the REMS Mini pressing tongs due to special arrangent of the pressing tongs connection (Patent EP 1 952 948).High compression pressing tongs in forged and specially hardened steel. Pressing contours of REMS pressing tongs are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour.Drive through REMS Mini-Press ACC drive unit. Read and follow the installation and assembly instructions of the system provider/manufacturer.Traceability according to EN 1775:2007 REMS pressing tongs Mini with pressing contour M, V, SA, B, RN and UP have worked a specific marking into the pressing contour which leaves a lasting impression on the g after the pressing process. This enables the user to check again whether the most suitable pressing tongs have been used to make the pressfit connection even after the pressing process.With this traceability REMS fulfils the recommendations of the European standard EN 1775:2007 for the installation of pressfitting systems for gas.

Universal, super handy electric tool with automatic circuit control for producing pipe pressing joints for all common pressfitting systems. For battery and corded operation. Pipe pressing joints Ø 10–40 mm, 3/8 - 1 1/4. REMS pressing tongs Mini.REMS Mini-Press ACC – universal up to Ø 40 mm / 1 1/4. Super light, super small, super handy. With automatic circuit control. Secure crimping in seconds. Automatic locking of pressing tongs. Assortment of REMS pressing tongs Mini for all common pressfitting systems

REMS pressing tongs High compression pressing tongs in forged and specially hardened steel. Pressing contours of REMS pressing tongs are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour. Hence far closer tolerances compared to as cast pressing contour.Drive through all REMS radial presses (except REMS Mini-Press ACC) and suitable radial presses of other makes. Read and follow the installation and assembly instructions of the system provider/manufacturer.

REMS Frigo 2 F Zero. Electric tube freezer with closed refrigerant circuit. For steel, copper, plastic and plastic pipes with metallic insert Ø 1/8–2", Ø 10–60 mm. Cooling unit 230 V, 50 Hz, 430 W, 2 coolant hoses, 2 clamping bands, spray bottle. Equipment for Ø 1/4"–1 14", 15–42 mm. In stable steel cabinet. Internal refrigerant: R290.

Robust quality tools for cutting tubes. Particularly suited for cutting stainless steel tubes.Copper tubes, thin-walled stainless steel tubes, thin-walled steel, aluminium, brass tubes Ø 3 – 28 mm Ø 18 – 118Cutting wheel:4327920515REMS RAS Cu-INOX – for places with difficult access.

Rapid charger Li-Ion/Ni-Cd 230 V, 50 – 60 Hz, 65 W

High compression pressing tongs in forged and specially hardened steel. Pressing contours of REMS pressing tongs are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour.Drive through REMS Mini-Press ACC drive unit. Read and follow the installation and assembly instructions of the system provider/manufacturer.

REMS pressing tongs High compression pressing tongs in forged and specially hardened steel. Pressing contours of REMS pressing tongs are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour. Hence far closer tolerances compared to as cast pressing contour.Drive through all REMS radial presses (except REMS Mini-Press ACC) and suitable radial presses of other makes. Read and follow the installation and assembly instructions of the system provider/manufacturer.