Duka Ventilation - Seite 2

Complete telescopic valve with wall penetration, external gray louvre grille and internal white poppet valve. Suitable for wall thicknesses from 230-350 mm.

Lamellar valve type 70 attached transition piece Ø100 mm. Valve with loose slats that opens for internal air flow, but minimizes wind nuisance from the outside. Used in connection with fans, hoods and dryers.

Used for wall penetration type 202. With the Duka click system, two transition pieces are clicked together. Thereby, two different channel dimensions are combined in an easy and simple way. Always remember to seal with glue or silicone. Colour: White Manufactured in Polystyrene (HIPS).

DUKA One S6 Wi-Fi is a one-room ventilation solution with heat recovery. DUKA One is mounted on the outer wall and can therefore be installed wherever there is a need for ventilation in the home.

DUKA One S6 Wi-Fi has a smaller inner screen, which is made in a stylish square design with rounded corners and has a matte surface look.

Fan without controls. Timeless and smooth front. 68 m3/h - sound level 26 dB(A) - 3 year warranty.

90° bend for round white ventilation pipes.

Flap valve Type 111, 150x150 mm, white

Tension band Ø60-165 mm

One-room heat recovery unit that can be used in both houses, apartments and businesses.

• All-in-one solution incl. control, with easy connection.
• This model has built-in Wi-Fi, which enables control via App.
• Internal screen where the supply air is blown upwards, which minimizes draft nuisance.
• Efficient and energy-conscious ventilation without opening doors and windows.

Drain pipe valve, Type 95.3, Ø75, (2 pcs), grey

Transition piece Type 2, Ø102/127/162 mm

Valve with frame and screw cap, adjusted by turning the screw cap.

Flex hose with insulation Ø162x4000 mm, white

Used when the fan S7 does not cover the duct opening. With rubber seal on the back and 4 screws for installation.

Jalousie grid Type 152.1, 150 mm x 150 mm, metal

Ventilation grille Type 460, 400x60 mm, alu

Used for mounting in cupboards and interior doors. Ensures the necessary extraction.

Lamellar valve type 70 attached transition piece Ø100 mm. Valve with loose slats that opens for internal air flow, but minimizes wind nuisance from the outside. Used in connection with fans, hoods and dryers.

Lamellar valve type 70 is a flat model for mounting on a wall. The louvered valve can be used for extraction from e.g. fans, hoods and tumble dryers, where the loose slats open up the internal air flow, while at the same time minimizing wind nuisance from the outside. Available in the colours: white, red, black and grey, so they can blend in naturally with many types of houses.

Ventilation pipes are manufactured in 2mm PVC. With smooth ends.

Pro 90 ist ein Ventilator höchster Qualität mit sehr leisem Motor und schlichtem Frontdesign, u.a. für Badezimmer. Der Ventilator ist mit Kugellagern ausgestattet, was eine lange Lebensdauer gewährleistet. Durchmesser: 99mm

TT Pro Kanalventilator hat eine hohe Leistung und Kapazität. Der Kanalventilator kann sowohl für Abluft als auch für Zuluft in Bereichen eingesetzt werden, die hohe Leistung, starken Luftstrom und niedrigen Geräuschpegel erfordern. Durchmesser: 160mm

Einraum-Wärmerückgewinnungsgerät mit hohem Rückgewinnungsgrad, einsetzbar in Haus, Wohnung und Gewerbe. Dieses Modell kann in allen Räumen verwendet werden, da es sehr leise ist. Durchmesser: 160mm

Kanalventilator zur Montage im Dachraum direkt im Lüftungskanal. Durchmesser: 160mm

Kanalventilator mit Zeitsteuerung zur Installation im Dachraum direkt im Lüftungskanal. Durchmesser: 100mm