The Tech-Protect Silicone Hook case is the perfect solution to protect your headphones. The elastic case has been perfectly matched and made of high-quality, scratch-resistant silicone.

The case is the epitome of minimalist design, while maintaining adequate protection of the device against scratches or falls.

In addition, the case is equipped with a practical carabiner that increases the range of possibilities of use - the headphones can be attached to a leash with keys or a loop in the pants, thanks to which falling or losing the set becomes almost impossible.

Tech-Protect Glass Fit+ tempered glass is a high-quality protective accessory made of lightweight and precisely milled glass with a thickness of only 0.3mm.

The perfectly matched design fully preserves the sensitivity of the touchscreen. The manufacturer rates its hardness level at 9H on a ten-point scale, which translates into exceptional scratch resistance during everyday use.

The glass is characterized by crystal clarity, thanks to which it retains the natural colors and sharpness of the display. An additional advantage is a special oleophobic coating, which effectively minimizes the accumulation of fingerprints and other impurities on the surface of the glass, thus making it easier to keep it clean.

* Due to the various milling of the edges of the displays, after installing the film/protective glass on the screen, a slight air halo may be created around the screen! This is a natural situation and depends on the milling of the screen in a given piece.

INSTALLATION INSTRUCTIONS:
1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine.
3) Install the coating as evenly as you can - you can position it with two sheets, gluing them to the side of the device.
4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

Slim and light case with built-in glass designed to fit perfectly on your Apple Watch.
Defense360 from Tech-Protect is a stylish way to fully protect your Watch.

The integrated tempered glass does not affect the touch sensitivity or the quality of the displayed image.
During installation, degrease the screen surfaces with an alcohol-based liquid.

The Tech-Protect QI15W-A36 is a multifunctional, wireless charging station that allows you to charge up to three devices at the same time – iOS smartphones, AirPods wireless headphones and Apple Watch. Thanks to its modular design, you can use the charger in any configuration, adapting it to your needs – charging all devices at the same time or each one separately.

With a sleek, minimalist design with a matte finish, the QI15W-A36 fits perfectly into any interior, from the home office to the bedroom, and its compact design saves valuable space on your desk or bedside table.

An advanced protection system ensures the safety of the charged devices, protecting them from overheating, overload and overvoltage. It maintains the optimal operating temperature, so even long charging is completely safe. The Tech-Protect QI15W-A36 is the perfect solution for people who value convenience, functionality and modern design in one device.

* To use the inductive charger to its full potential, we recommend connecting it to an AC charger with an output power of 35W (V*A) and more.

Tech-Protect Defense Air is a durable protective case created for the most demanding users. Made of lightweight yet robust TPU plastic, it provides excellent protection against bumps, drops, and scratches. The design of the case is designed to fully protect the watch case, while not restricting access to buttons or the functionality of the device.

The matte finish and armored design give the smartwatch a sporty, outdoor character. The Defense Air is ideal for intense workouts, expeditions in difficult conditions and everyday use, providing maximum protection without compromising on appearance or comfort. Assembly and disassembly are quick and intuitive, making this case a practical addition for any user.

The Tech-Protect Nylonmag strap is an elegant and functional accessory designed specifically for smartwatches. Made of high-quality, braided nylon, it provides durability and wearing comfort. Lightweight and breathable, making it ideal for everyday use as well as intense workouts.

A characteristic element is the metal fastening, thanks to this mechanism, the strap can be easily and quickly adjusted to the wrist, ensuring a secure and secure attachment.

Its modern design blends perfectly with the aesthetics of modern smartwatches, emphasizing their elegant appearance and adding a unique character.

The band is compatible with Apple Watch models (44 / 45 / 46 / 49 mm): 8 / 9 / 10 / 11, SE 1 / 2 / 3 series, Ultra 1 / 2 / 3 series.

The Tech-Protect Silicone case is a practical and stylish solution, created to keep your headphones as secure as possible. Made of high-quality, flexible silicone, it perfectly protects the device from scratches, dirt and the effects of everyday use.

The precisely fitted design guarantees full functionality – the case does not restrict access to ports or buttons, and its soft, pleasant to the touch surface makes using the headphones even more comfortable.

The minimalist design combines elegance with simplicity, making the case a great match for both classic and modern styles. It is an excellent choice for those who value a combination of aesthetics and reliable protection.

The Tech-Protect Silicone Hook Case is a functional and stylish accessory that provides comprehensive protection for your headphones in any situation. Made of high-quality, flexible silicone, it effectively protects the device from scratches, dirt and the effects of everyday falls. The material is pleasant to the touch, resistant to damage and easy to clean, which guarantees long-term use without losing its aesthetic appearance.

The precisely fitted design makes the case fit perfectly against the headphone case, while not restricting access to ports and buttons. The minimalist design combines simplicity with elegance, making it a perfect fit for any style.

An additional advantage is a practical carabiner that increases the functionality of the case. Thanks to it, you can conveniently attach the headphones to your bag, backpack, key lanyard or trouser belt, minimizing the risk of accidental loss or falling. It is an ideal solution for people who value comfort, safety and modern design.

The Tech-Protect Silicone Hook case is the perfect solution to protect your headphones. The elastic case has been perfectly matched and made of high-quality, scratch-resistant silicone.

The case is the epitome of minimalist design, while maintaining adequate protection of the device against scratches or falls.

In addition, the case is equipped with a practical carabiner that increases the range of possibilities of use - the headphones can be attached to a leash with keys or a loop in the pants, thanks to which falling or losing the set becomes almost impossible.

A slim and lightweight case with built-in glass designed to fit perfectly on your Galaxy Watch.
Defense360 from Tech-Protect is a stylish way to fully secure your Watch.

The integrated tempered glass does not affect touch sensitivity or image quality.
During installation, degrease the screen surfaces with an alcohol-based liquid.

The Tech-Protect Silicone strap is an indispensable accessory for users who want to combine comfort and style. Made of high-quality TPU, it provides unparalleled durability and functionality.

Its lightweight design makes it extremely comfortable to wear on your wrist, even during intense physical activities.

The adjustable length allows it to be adjusted to individual preferences, ensuring a perfect fit on the wrist.

In addition, Silicone is extremely durable and resistant to everyday scratches and weather conditions. You don't have to worry about damage or unexpected events, because this strap will accompany you for a longer time, maintaining its durability and aesthetic appearance.

Tech-Protect Bounce Pro is an advanced protective case that combines effective protection with multifunctionality. Made of durable, transparent silicone, it protects the charging case from scratches, bumps and everyday wear and tear, while maintaining the visibility of the original design of your headphones.

The magnetic closure with an improved safety lock design makes opening and closing the case even easier and more secure, protecting your headphones from accidental opening and dropping. Thanks to the stand function, you can conveniently place your phone in a horizontal position while watching movies or video calls.

Reinforced corners absorb impact during falls, protecting the case from damage. A practical lanyard with a carabiner is included, which allows you to attach the case to your keys, backpack or trouser belt, ensuring constant access to the headphones.

Tech-Protect Bounce Pro is an advanced protective case that combines effective protection with multifunctionality. Made of durable, transparent silicone, it protects the charging case from scratches, bumps and everyday wear and tear, while maintaining the visibility of the original design of your headphones.

The magnetic closure with an improved safety lock design makes opening and closing the case even easier and more secure, protecting your headphones from accidental opening and dropping. Thanks to the stand function, you can conveniently place your phone in a horizontal position while watching movies or video calls.

Reinforced corners absorb impact during falls, protecting the case from damage. A practical lanyard with a carabiner is included, which allows you to attach the case to your keys, backpack or trouser belt, ensuring constant access to the headphones.

Tech-Protect Glass Flex+ is a revolutionary hybrid glass that provides maximum screen protection without compromise. The ultra-thin design with a thickness of only 0.28 mm makes it virtually invisible and at the same time extremely durable. With a ceramic coating with a hardness of 7H, it effectively protects against scratches and pressure, maintaining perfect clarity and full sensitivity to touch. The biggest advantage? It doesn't crack or crumble like traditional tempered glass!

Tech-Protect Glass Flex+ is the perfect solution for those who value complete safety without compromise.

INSTALLATION INSTRUCTION:
1. The installation of this glass model is different from traditional tempered glass glued to a thin adhesive layer. Due to the thicker layer of glue, the process is a bit more demanding and requires precision.
2. Clean the watch screen thoroughly. Use a damp cloth to remove any dirt and fingerprints. Then wipe the screen with a dry, soft cloth to completely remove moisture. Finally, use dust stickers to get rid of dust and dust particles.
3. Carefully remove the protective film from the adhesive layer. Precisely align the glass with the screen and gently place it.
4. If any of the edges do not adhere properly, it is likely that the glass has been glued unevenly. In this case, they should be peeled off and re-glued until the desired effect is achieved.
5. Remove air bubbles by gently pressing the glass from the center to the edges. Use your finger or a soft cloth to do this, pushing the air out.
6. Due to the specificity of glass production (polishing, milling), the fitting may require several minutes of work. After proper installation, the final result is aesthetic and durable.

The Tech-Protect Silicone Hook Case is a functional and stylish accessory that provides comprehensive protection for your headphones in any situation. Made of high-quality, flexible silicone, it effectively protects the device from scratches, dirt and the effects of everyday falls. The material is pleasant to the touch, resistant to damage and easy to clean, which guarantees long-term use without losing its aesthetic appearance.

The precisely fitted design makes the case fit perfectly against the headphone case, while not restricting access to ports and buttons. The minimalist design combines simplicity with elegance, making it a perfect fit for any style.

An additional advantage is a practical carabiner that increases the functionality of the case. Thanks to it, you can conveniently attach the headphones to your bag, backpack, key lanyard or trouser belt, minimizing the risk of accidental loss or falling. It is an ideal solution for people who value comfort, safety and modern design.

The Tech-Protect Iconband Pro is a comfortable and lightweight sports strap with a unique texture. Made of durable and damage-resistant TPU, it is perfect for cycling, exercising, traveling or other physical activities.

Comfortable to wear and skin-friendly strap, can be easily adjusted to fit your wrist size - equipped with a comfortable and secure stainless steel clasp.

Tech-Protect Easy Set Flex+ is a modern hybrid glass with an advanced mounting system. The set includes three lenses and a special mounting frame that guides the installation precisely and eliminates the risk of incorrect embedding. It is a solution created for those who value simplicity and perfect effect.

The ceramic coating with a hardness of 7H effectively protects against scratches from daily contact with surfaces. The biggest advantage of hybrid glass is its flexibility – unlike traditional tempered glass, the material absorbs impact energy without cracking or crumbling. This means long-term protection without the risk of violent damage.

The Easy Set system is a well-thought-out tool that makes installation intuitive and secure. Excellent transparency ensures clarity and faithful color reproduction, without affecting touch responsiveness or functionality.

The soft and flexible Nylon Pro strap from the Tech-Protect brand is a great solution for active users.

The high quality of the material and the combination of two textile layers make the band extremely durable and resistant to shocks and impacts. It is perfect for cycling, exercising, traveling or other physical activities.

Comfortable to wear and skin-friendly strap, can be easily adjusted to the size of your wrist - the comfortable and secure fastening just slides into the appropriate loop.

The Tech-Protect Silicone Hook Case is a functional and stylish accessory that provides comprehensive protection for your headphones in any situation. Made of high-quality, flexible silicone, it effectively protects the device from scratches, dirt and the effects of everyday falls. The material is pleasant to the touch, resistant to damage and easy to clean, which guarantees long-term use without losing its aesthetic appearance.

The precisely fitted design makes the case fit perfectly against the headphone case, while not restricting access to ports and buttons. The minimalist design combines simplicity with elegance, making it a perfect fit for any style.

An additional advantage is a practical carabiner that increases the functionality of the case. Thanks to it, you can conveniently attach the headphones to your bag, backpack, key lanyard or trouser belt, minimizing the risk of accidental loss or falling. It is an ideal solution for people who value comfort, safety and modern design.

Tech-Protect Glass Flex+ is a revolutionary hybrid glass that provides maximum screen protection without compromise. The ultra-thin design with a thickness of only 0.28 mm makes it virtually invisible and at the same time extremely durable. With a ceramic coating with a hardness of 7H, it effectively protects against scratches and pressure, maintaining perfect clarity and full sensitivity to touch. The biggest advantage? It doesn't crack or crumble like traditional tempered glass!

Tech-Protect Glass Flex+ is the perfect solution for those who value complete safety without compromise.

INSTALLATION INSTRUCTION:
1. The installation of this glass model is different from traditional tempered glass glued to a thin adhesive layer. Due to the thicker layer of glue, the process is a bit more demanding and requires precision.
2. Clean the watch screen thoroughly. Use a damp cloth to remove any dirt and fingerprints. Then wipe the screen with a dry, soft cloth to completely remove moisture. Finally, use dust stickers to get rid of dust and dust particles.
3. Carefully remove the protective film from the adhesive layer. Precisely align the glass with the screen and gently place it.
4. If any of the edges do not adhere properly, it is likely that the glass has been glued unevenly. In this case, they should be peeled off and re-glued until the desired effect is achieved.
5. Remove air bubbles by gently pressing the glass from the center to the edges. Use your finger or a soft cloth to do this, pushing the air out.
6. Due to the specificity of glass production (polishing, milling), the fitting may require several minutes of work. After proper installation, the final result is aesthetic and durable.

Tech-Protect Nylon is a durable strap, made of high-quality nylon. Its design ensures comfort and durability.

Solid metal finish, allows you to easily and securely attach the watch. The subdued and versatile design suits many outfits, both everyday and more formal.

Thanks to its flexibility and resistance to damage, Tech-Protect Nylon is the perfect choice for people who value both functionality and aesthetics.

The band is compatible with Apple Watch models (44 / 45 / 46 / 49 mm): 8 / 9 / 10 / 11, SE 1 / 2 / 3 series, Ultra 1 / 2 / 3 series.

The Tech-Protect Milaneseband features an elegant and modern design. Crafted from high-quality, skin-friendly stainless steel, it features a simple clasp mechanism that allows for easy adjustment of the strap length, making it suitable for a variety of wrist sizes.

Solid construction and high-quality materials make the strap durable and comfortable to wear, and add elegance to any smartwatch.

The Tech-Protect Iconband Air strap is an excellent choice for people who value modern design, comfort and reliability during everyday use and physical activity. Made of flexible and durable silicone, it guarantees not only a stylish look, but also exceptional wearing comfort.

Its ultra-light and soft design adapts perfectly to the shape of your wrist, minimizing the feeling of pressure even during prolonged workouts. Specially designed ventilation holes ensure proper air circulation, protecting the skin from overheating and moisture.

The Iconband Air offers a wide range of length adjustments, so you can easily adjust it to your needs – no matter if you're working out at the gym, running, or just wearing a smartwatch every day.

In addition, the strap is characterized by high resistance to scratches, sweat and changing weather conditions, which makes it a solid and durable companion for any activity. The Tech-Protect Iconband Air combines functionality with aesthetics, offering reliable support in any situation.

The Tech-Protect Silicone Hook case is the perfect solution to protect your headphones. The elastic case has been perfectly matched and made of high-quality, scratch-resistant silicone.

The case is the epitome of minimalist design, while maintaining adequate protection of the device against scratches or falls.

In addition, the case is equipped with a practical carabiner that increases the range of possibilities of use - the headphones can be attached to a leash with keys or a loop in the pants, thanks to which falling or losing the set becomes almost impossible.

The Tech-Protect Silicone case is the perfect solution to protect your headphones. The elastic case has been perfectly matched and made of high-quality, scratch-resistant silicone.

The case is the epitome of minimalist design, while maintaining adequate protection of the device against scratches or falls.

A practical silicone lanyard has been implemented in the case to increase the range of possibilities - the headphones can be attached, for example, to keys, a bag or a backpack, making it almost impossible to fall or lose the set.