Tech-Protect - Seite 31

Tech-Protect Glass Fit+ tempered glass is a high-quality protective accessory made of lightweight and precisely milled glass with a thickness of only 0.3mm.

The perfectly matched design fully preserves the sensitivity of the touchscreen. The manufacturer rates its hardness level at 9H on a ten-point scale, which translates into exceptional scratch resistance during everyday use.

The glass is characterized by crystal clarity, thanks to which it retains the natural colors and sharpness of the display. An additional advantage is a special oleophobic coating, which effectively minimizes the accumulation of fingerprints and other impurities on the surface of the glass, thus making it easier to keep it clean.

* Due to the various milling of the edges of the displays, after installing the film/protective glass on the screen, a slight air halo may be created around the screen! This is a natural situation and depends on the milling of the screen in a given piece.

INSTALLATION INSTRUCTIONS:
1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine.
3) Install the coating as evenly as you can - you can position it with two sheets, gluing them to the side of the device.
4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

Tech-Protect Glass Fit+ is a tempered glass that combines protection with aesthetics. Precisely milled edges and minimal thickness make the glass almost disappear on the screen, while maintaining full touch sensitivity.

The 9H hardness on a ten-point scale means that the glass can withstand contact with keys, coins and other sharp objects that you carry in your pocket every day. The thickness of only 0.3 mm practically does not change the profile of your smartphone and does not affect the responsiveness of the screen. The hardened material dissipates the force of the impact, protecting the display from cracks during falls.

The oleophobic coating minimizes the accumulation of fingerprints and makes it easier to keep the glass clean. Crystal clarity preserves natural colors and image sharpness without affecting the quality of the display. The glass design ensures compatibility with most available cases, so you can freely personalize the look of your phone.

Tech-Protect Supreme is an irreplaceable protective kit that protects the screen and lens of your device during everyday use.

The tempered coating for the display is made of light and milled glass with a thickness of 0.3mm and a hardness of 9H. The crystal clear glass ensures image clarity, perfect reproduction of color saturation and does not disturb the sensitivity of touch. In addition, it is covered with a high-quality oleophobic coating, which minimizes the amount of fingerprints or other impurities left.

Protective lens cap made of high-quality tempered glass with a hardness of 9H. Precisely cut, it provides protection against scratches and breakage. A unique advantage is the simple installation, accessible to any user, even inexperienced users.

The Tech-Protect Rugged Shield MagSafe is a hybrid case that combines a durable flexible TPU frame with a matte polycarbonate back. The design provides maximum protection for your phone, while maintaining easy installation and comfort for everyday use. The integrated MagSafe magnetic ring allows you to quickly and stably attach magnetic accessories and wireless chargers.

Reinforced corners with cushioning technology absorb shocks during falls, protecting your phone in the most vulnerable points. Raised edges around the screen and camera protect against scratches and contact with surfaces when the phone is lying flat. The textured TPU sides provide a non-slip grip and prevent it from slipping out of your hand. Built-in MagSafe magnets ensure compatibility with the entire magnetic accessory ecosystem.

The matte finish on the back is resistant to fingerprints and debris, maintaining an aesthetic appearance for a long time. Precise cutouts allow full access to all ports, buttons and functions of the phone without having to remove the case. The case retains full wireless charging functionality, including MagSafe chargers.

Lightweight yet extremely durable, the SmartCase Pen is designed for comprehensive device protection and maximum convenience. The robust, precisely fitted design fits perfectly to the case, providing stability, safety and effective protection against scratches and mechanical damage.

The matte finish gives the case a sleek, modern look while minimizing the appearance of fingerprints and dirt — so your device always looks aesthetically pleasing.

The SmartCase Pen is a combination of protection and functionality. The case can be easily transformed into a practical stand, ideal for watching movies and video calls, as well as for comfortable writing or drawing. An added bonus is a dedicated stylus slot that allows you to store it securely and access it at all times – always where you need it.

Slim and light case with built-in glass designed to fit perfectly on your Apple Watch.
Defense360 from Tech-Protect is a stylish way to fully protect your Watch.

The integrated tempered glass does not affect the touch sensitivity or the quality of the displayed image.
During installation, degrease the screen surfaces with an alcohol-based liquid.

The Tech-Protect Silicone Hook Case is a functional and stylish accessory that provides comprehensive protection for your headphones in any situation. Made of high-quality, flexible silicone, it effectively protects the device from scratches, dirt and the effects of everyday falls. The material is pleasant to the touch, resistant to damage and easy to clean, which guarantees long-term use without losing its aesthetic appearance.

The precisely fitted design makes the case fit perfectly against the headphone case, while not restricting access to ports and buttons. The minimalist design combines simplicity with elegance, making it a perfect fit for any style.

An additional advantage is a practical carabiner that increases the functionality of the case. Thanks to it, you can conveniently attach the headphones to your bag, backpack, key lanyard or trouser belt, minimizing the risk of accidental loss or falling. It is an ideal solution for people who value comfort, safety and modern design.

The Tech-Protect Camalloy Fit+ cover is a precision-crafted accessory that effectively protects the camera module in your smartphone. Made of durable aluminum alloy, it protects against scratches, dirt and minor damage during daily use.

Thanks to its slim design and perfect fit, the hood does not affect the quality of photos or recordings, and its installation is quick and simple – just place it on the camera module to make it snug against the surface.

The minimalist design makes the cover almost invisible, maintaining the elegant appearance of the device. It's a practical and aesthetic solution for people who want to provide their smartphone with maximum protection without sacrificing style.

The Tech-Protect Quick Set Spy+ 2-Pack Privacy Glass is an innovative solution for maximum privacy protection during use. A special filtering technology ensures that the screen content is visible only to the user looking directly at the display, while those watching from the side see only the black screen.

The glass combines two key functions - privacy protection and full protection of the display against scratches, cracks and impacts. Made of tempered glass with a highest hardness of 9H, it provides excellent image quality without affecting the responsiveness of the touch screen.

The kit includes two protective lenses and a special installation frame that guarantees perfect positioning and application of the glass without air bubbles. This comprehensive installation system eliminates the common problems associated with tempered glass application, ensuring a professional result the first time.

Ideal for people working with sensitive data, traveling by public transport or simply valuing their privacy in public places.

* Due to the variety of milling of the edges of the displays, a slight halo of air may form around the screen after the film/protective glass is installed on the screen. This is a natural situation and depends on the screen itself.

INSTALLATION INSTRUCTIONS:
1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine.
3) Install the shell as evenly as you can - you can position it with the help of the positioning frame from the kit.
4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

Tech-Protect Easy Set+, i.e. the tempered coating for the display, is made of light and milled glass with a thickness of 0.3mm and a hardness of 9H. The crystal clear glass ensures image clarity, perfect reproduction of color saturation and does not disturb the sensitivity of touch. In addition, it is covered with a high-quality oleophobic coating, which minimizes the amount of fingerprints or other impurities left.

Protective lens cap made of high-quality tempered glass with a hardness of 9H. Precisely cut, it provides protection against scratches and breakage.

The set includes installation accessories along with a positioning frame, thanks to which installation is very easy and accessible to literally everyone.

INSTALLATION INSTRUCTIONS:
1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine.
3) Install the shell as evenly as you can - you can position it with the help of the positioning frame from the kit.
4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

Stylish and simple design and a high level of protection are synonymous with the new Magmat Magsafe case from the Tech-Protect brand. High-quality TPU and PC components were used to make the case. The flexible frame made of polyurethane will perfectly protect against shocks and falls, while the hard polycarbonate back will protect your phone from scratches.

The classic, transparent finish will ensure the unique look of your smartphone.
The slightly raised form of the case around the camera and screen protects against damage, lifting the phone just above a flat surface.

The Magmat also features a magnetic ring compatible with the MagSafe wireless charger for quick and easy charging.

Tech-Protect Supreme is an irreplaceable protective kit that protects the screen and lens of your device during everyday use.

The tempered coating for the display is made of light and milled glass with a thickness of 0.3mm and a hardness of 9H. The crystal clear glass ensures image clarity, perfect reproduction of color saturation and does not disturb the sensitivity of touch. In addition, it is covered with a high-quality oleophobic coating, which minimizes the amount of fingerprints or other impurities left.

Protective lens cap made of high-quality tempered glass with a hardness of 9H. Precisely cut, it provides protection against scratches and breakage.

The set includes installation accessories along with a positioning frame, thanks to which installation is very easy and accessible to literally everyone.

INSTALLATION INSTRUCTIONS:
1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine.
3) Install the shell as evenly as you can - you can position it with the help of the positioning frame from the kit.
4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

Tech-Protect Glass Fit+ tempered glass is a high-quality protective accessory made of lightweight and precisely milled glass with a thickness of only 0.3mm.

The perfectly matched design fully preserves the sensitivity of the touchscreen. The manufacturer rates its hardness level at 9H on a ten-point scale, which translates into exceptional scratch resistance during everyday use.

The glass is characterized by crystal clarity, thanks to which it retains the natural colors and sharpness of the display. An additional advantage is a special oleophobic coating, which effectively minimizes the accumulation of fingerprints and other impurities on the surface of the glass, thus making it easier to keep it clean.

* Due to the various milling of the edges of the displays, after installing the film/protective glass on the screen, a slight air halo may form around the screen! This is a natural situation and depends on the milling of the screen in a given piece.

INSTALLATION INSTRUCTIONS:
1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine.
3) Install the coating as evenly as you can - you can position it with two sheets, gluing them to the side of the device.
4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

Tech-Protect Kevlar Magsafe is an armored series of cases that will protect your device at a 360-degree angle in all conditions. The case is designed with an advanced hybrid design, making it a perfect fit and lightweight.

The two-piece case combines hard armor on the back, made of PC coating and shock-resistant TPU. Additional reinforcement in the corners - protective airbags - will effectively absorb any fall. The front of the device is wrapped in a frame with an integrated polycarbonate cover. This solution perfectly separates the display, protecting it from scratches.

Raised edges to protect the lens and the display of your smartphone from damage, a non-slip finish or the ability to charge wirelessly are other advantages that Kevlar Magsafe is equipped with.

MagSafe compatibility makes using your device even easier and more convenient. You can charge your phone seamlessly and use a variety of accessories with Apple-branded technology.

The last element to mention is the functional kick stand. The easy-to-use kickstand will serve as both a stand - the ability to position the phone vertically and horizontally - and a finger holder to hold the phone securely in your hand.

The Kevlar case has a military MLT-STD-810H certificate, which means that the product has been subjected to specialized endurance tests and meets strict usage requirements.

Lightweight yet extremely durable, the Tech-Protect SmartCase Pen is designed for comprehensive tablet protection and maximum comfort. The robust, precisely fitted design fits perfectly to the case, providing stability, safety and effective protection against scratches and mechanical damage.

The matte finish gives the case a sleek, modern look while minimizing the appearance of fingerprints and dirt, so the device always looks aesthetically pleasing. The SmartCase Pen is a combination of protection and functionality - the case can be easily transformed into a practical stand, ideal for watching movies and video calls, as well as for comfortable writing or drawing. An additional advantage is a dedicated space for the stylus, which allows it to be safely stored and always accessed, always where you need it.

In addition, the SmartCase is equipped with an intelligent automatic wake-up and sleep function - the case responds to opening and closing the lid, ensuring comfort of use and energy savings. Precise cutouts guarantee full access to all ports and buttons without having to remove the case.

Tech-Protect Glass Set+, which is an irreplaceable protective kit that protects the screen and lens of your device during everyday use.

Tempered glass is a high-quality protective accessory made of lightweight and precision-milled glass with a thickness of only 0.3mm.
The perfectly matched design fully preserves the sensitivity of the touchscreen. The manufacturer rates its hardness level at 9H on a ten-point scale, which translates into exceptional scratch resistance during everyday use.

The glass is characterized by crystal clarity, thanks to which it retains the natural colors and sharpness of the display. An additional advantage is a special oleophobic coating, which effectively minimizes the accumulation of fingerprints and other impurities on the surface of the glass, thus making it easier to keep it clean.

Protective lens cap made of high-quality tempered glass with a hardness of 9H. Precisely cut, it provides protection against scratches and breakage.

* The glass is compatible with most cases available on the market.
** Due to the variety of milling of the edges of the displays, a slight halo of air may form around the screen after the film/protective glass is installed on the screen! This is a natural situation and depends on the milling of the screen in a given piece.

INSTALLATION INSTRUCTIONS:
1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine.
3) Install the coating as evenly as you can - you can position it with two sheets of tape by sticking them to the side of the device.
4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

The Kevlar Aura MagSafe case from Tech-Protect is a solid protection for your smartphone in a modern edition. Made of durable material, it provides high resistance to scratches, shocks and drops, while maintaining a slim profile and elegant appearance.

The integrated stand function is a convenient solution for people watching movies, making video calls or working on the go – the foldable kickstand allows you to position the phone both vertically and horizontally.

The case is also equipped with a camera cover that protects the lenses from damage and dirt. Precise cutouts and gently raised edges around the camera island provide additional protection for everyday use.

The built-in MagSafe ring ensures full compatibility with MagSafe chargers and accessories – no need to remove the case.

Tech-Protect Camfull Fit+ is a high-quality camera cover made of hybrid glass. It provides comprehensive protection of your smartphone's lenses against scratches, mechanical damage and everyday dirt, while maintaining the elegant appearance of the device.

Hybrid glass combines the advantages of tempered hard glass with the flexibility of polymers, creating a robust protective barrier against impact and contact with various surfaces. The cover covers each lens, protecting it from scratches from keys, sand, coins, and other sharp objects. Thanks to its precise workmanship and slim design, it does not affect the operation of the camera, and the quality of photos and videos is the same as without the cover.

Installing the Camfull Fit+ is simple and intuitive – the precise fit ensures perfect alignment with the camera module. Once installed, the cover holds stably for a long time, does not peel off and does not move during daily use. It's a reliable solution for anyone who wants to maintain the perfect condition of their camera without compromising on functionality and aesthetics.

The SC Pen Hybrid case from Tech-Protect is a lightweight and thin protective case that will protect against damage and also emphasize the unique silhouette of your device.

The hybrid design is a combination of a flexible TPU frame that absorbs shocks and a hard PC back.
The SC Pen Hybrid will protect against accidental drops or scratches, and at the same time does not completely cover the original appearance.

The cover is equipped with a dedicated place for a stylus, allowing for safe use without the risk of loss.

The built-in screen protector can be used as a stand for more comfortable use of the tablet, and thanks to the technology used to wake and sleep the device, it will ensure a slightly longer battery life.

How to check if a particular accessory fits your iPad?
It's simple, check the back of the device for the model number that starts with the letter A:
The product in this range fits for: A2696, A2757, A2777, A3354, A3355, A3356.

The V4 metal bike rack from Tech-Protect represents the highest standard in its class, offering reliability and robustness.

Made of high-quality aluminum alloy, it is characterized by exceptional durability and lightness. The thickened shaft with non-slip mats ensures a secure and stable attachment to the handlebars of the bike. Installation with ampoule screws guarantees solidity and safety during use.

The adjustable grip jaws, with a width range from 62mm to 105mm, allow you to hold your phone steadily even in thicker cases. In addition, the jaws are equipped with pads to prevent scratching the phone.

The Tech-Protect SC Pen Origami is an elegant case that combines protection with the practical function of an Origami-style stand. Made of lightweight, high-quality materials, it protects your tablet from accidental drops and bumps while providing a pleasant to the touch finish.

The Origami design allows you to position the tablet in different positions and at different angles – the case will work well both for writing, drawing, reading, as well as watching movies or video calls. Durable flap folds ensure stability in any of the available positions. The built-in function of automatically waking and sleeping the tablet when you open and close the case helps save the battery of the device.

The hidden Apple Pencil holder integrated into the case lets you always have your stylus close at hand — without the risk of losing it and without having to carry it separately. Magnetic flap ensuring a secure and convenient closure of the tablet during transport without buckles or Velcro. Precise cutouts give you full access to all ports, buttons, and speakers.

The Tech-Protect PB14 LifeMag MagSafe is a compact and functional device designed for users of smartphones equipped with MagSafe technology. Thanks to the magnetic mount, it allows convenient and safe wireless charging with a power of up to 7.5W. The powerbank has a 5000 mAh battery. The PB14 is equipped with a USB-C port, which allows you to quickly charge both the power bank itself and other devices.

The built-in pop-up stand allows you to conveniently position your phone in a horizontal or vertical position – ideal for watching video or making hands-free video calls. The housing is made of durable ABS and polycarbonate materials for resistance to everyday wear and tear, while built-in protection systems protect against overvoltage, overcharging and overheating.

With its modern, minimalist design and small size, the PB14 is perfect for both travel and everyday use.

* MagSafe magnetic only works directly with your phone or on a case with a built-in MagSafe magnetic eye.

The Tech-Protect Hydro flex+ hydrogel film is a modern screen protector that combines flexibility and durability. Made of high-quality TPU plastic, it perfectly adapts to any surface of the screen, including its curved edges.

The most important advantage of Hydro flex+ is the comprehensive protection of the screen against mechanical damage during everyday use. The film has innovative self-healing properties that allow for self-smoothing of minor scratches caused during the operation of the device. Despite its advanced protection, the film maintains full optical clarity, ensuring faithful reproduction of the colors of the display and unchanged sensitivity of the touchscreen.

Thanks to the flexibility of the TPU material, the installation of the film is simple and intuitive, and the end result guarantees almost invisible protection that does not affect the aesthetics or functionality of the smartphone.

Lightweight yet extremely durable, the SmartCase is designed to comprehensively protect your device from mechanical damage from all sides. The precisely fitted design fits perfectly to the case, guaranteeing stability and safety in everyday use.

The matte finish of the case gives it a sleek look and effectively protects against fingerprints and dirt, keeping the device impeccable clean.

SmartCase is not only protection, but also functionality. The case can be easily transformed into a practical stand, allowing you to comfortably use the device in a variety of configurations – whether it's upright, perfect for video conferencing or watching videos, or horizontal, perfect for writing, drawing or working with a stylus.

In addition, the SmartCase is equipped with an intelligent automatic wake-up and sleep function – the case responds to the opening and closing of the lid, ensuring comfort of use and energy savings.

How to check if a particular accessory fits your iPad?
It's simple, check the back of the device for the model number that starts with the letter A.
The product in this range fits for: A2696, A2757, A2777, A3354, A3355, A3356.

Lightweight yet extremely durable, the SmartCase is designed to comprehensively protect your device from mechanical damage from all sides. The precisely fitted design fits perfectly to the case, guaranteeing stability and safety in everyday use.

The matte finish of the case gives it a sleek look and effectively protects against fingerprints and dirt, keeping the device impeccable clean.

SmartCase is not only protection, but also functionality. The case can be easily transformed into a practical stand, allowing you to comfortably use the device in a variety of configurations – whether it's upright, perfect for video conferencing or watching videos, or horizontal, perfect for writing, drawing or working with a stylus.

In addition, the SmartCase is equipped with an intelligent automatic wake-up and sleep function – the case responds to the opening and closing of the lid, ensuring comfort of use and energy savings.

How to check if a particular accessory fits your iPad?
It's simple, check the back of the device for the model number that starts with the letter A.
The product in this range fits for: A2696, A2757, A2777, A3354, A3355, A3356.