This Acti9 iCT is a modular and reliable contactor. It is a 1P remote control device with 1 normally open contact. Rated current is 25A for AC-7a and 8.5A for AC-7b. Operating voltage is 250VAC and a control voltage is 230VAC to 240VAC. Electrical endurance goes up to 100000 cycles for AC-7A or AC-1, 30000 cycles for AC-7C, AC-7B, AC-3, AC-5A or AC-5B. The maximum switching operations is 100 per day. The degree of protection is IP20 and IP40 in an enclosure. It is DIN rail mountable. This device could be used for remote switching small motors (fans, mixers) or HVAC system applications. It is compatible with all the Acti9 control auxiliaries, for heating & ventilation control applications. This product is compliant with IEC/EN 61095.

Acti9 IC60 RCBO 4P 20A 30mA C 6kA A. For protection of end circuit, and protection of people against electric shock at direct contact ( 30 mA). As well as earth leakage at front plate.

The Wiser Multiwire LED Dimmer Puck from Schneider Electric is a puck dimmer used to control and dim LED light sources and resistive or capacitive loads. Multiwire technology - it works with and zero conductor. It can be controlled remotely with the Wiser app and can be controlled locally with mechanical push buttons. The dimmer is built on and certified according to the ZigBee 3.0 protocol. It is equipped with green/red/orange LED programming indicator. Thanks to the Multiwire technology, it can operate LED loads below 1W/VA with the neutral conductor connected. The device has overheating protection, short circuit protection and automatic overload protection. The nominal operating voltage is 220-240VAC at 50/60 Hz. Power consumption in standby mode is less than 0.3W. The load handling of 230V LED light is 200W, incandescent lamp and 230V halogen lamp is 300W and halogen lamp with standard electronic transformer is 300W. This unit is designed for installation in either a PL or membrane box. The product dimensions are (W) 45mm x (H) 45mm x (D) 18.5mm and the product weight is 23g. The product's color is white/green. The ambient air temperature for operation is from -5°C up to +35°C. It achieves IP20 degree of protection. Wiser offers intelligent integration of various wireless devices and provides an enriching and energy-optimizing control thanks to the Wiser app. Wiser Gateway is required to use the app and to achieve full functionality. The product complies with CE, RoHS, Zigbee 3.0 certifications.

Oberflächenmontierte Box mit aufsteckbarem Deckel. Mit 12 Membranen an den Seiten und 2 unten für Kabel mit einem Durchmesser zwischen 5 mm und 14 mm. IP65. Material: Isolierkörper aus PP/SEBS, Deckel aus PP

This Acti9 iC60N is a low voltage miniature circuit breaker (MCB). It is a 3P circuit-breaker with 3 protected poles, 25A rated current and C tripping curve. It can be mounted on DIN rail for modular installation. As circuit-breaker, its breaking capacity, according to IEC/EN 60898-1, is 6000A at 400VAC. As circuit-breaker, its breaking capacity, according to IEC/EN 60947-2, is 20kA at 230VAC and 10kA at 400VAC. This miniature circuit breaker protects circuits against short circuit and overload currents. It has an IP20 degree of protection (as per IEC/EN 60529) on its terminals. It becomes IP40 once in modular enclosure with insulation class II. its fast closing mechanism improves its service life. Its limitation class 3 (according to EN/IEC60898-1) improves downstream circuit protection cost. Its unique Visitrip indicator reduces intervention time by showing the faulty circuit. Its Visisafe green strip guarantees the physical opening of the contacts to allow downstream maintenance. This double terminal miniature circuit breaker reflects Schneider Electric expertise with more than 40 years developing modular devices for the protection of electrical circuits in all applications. It has a longer service life thanks to its high limitation and fast closing. This product is compliant with both IEC 60898-1 and IEC 60947-2, has IP20B finger proof terminals with double the tightening torque versus the standard and is DIN rail mountable. It offers VisiTripTM for safety during maintenance and VisiSafeTM to reduce intervention time.

Schneider Electric A9Z51440 Nicht kategorisiert

Schneider Electric iID Stromunterbrecher 2P

Grün/Rot beleuchteter Doppeldruckknopf Ø22 mit Beschriftung

Weißes Lichtblock für den Kopf Ø22 mit integrierter LED 230..240 V - Schraubklemmen

Schneider Electric Resi9 MCB Stromunterbrecher 3P + N

Schneider Electric iID Stromunterbrecher 4P

Horizontal comb busbarsComb busbars allow an efficient distribution of power without the need for wiringeach deviceComb busbars come in different lengths and can be sawn off as required at themark printed on the insulating materialSupplied with two IP20 l

Acti9 IC60 RCBO 4P 16A 30mA C 6kA A. For protection of end circuit, and protection of people against electric shock at direct contact ( 30 mA). As well as earth leakage at front plate.

This Acti9 iC60N is a low voltage miniature circuit breaker (MCB). It is a 2P circuit-breaker with 2 protected poles, 32A rated current and C tripping curve. It can be mounted on DIN rail for modular installation. As circuit-breaker, its breaking capacity, according to IEC/EN 60898-1, is 6000A at 400VAC. As circuit-breaker, its breaking capacity, according to IEC/EN 60947-2, is 20kA at 230VAC and 10kA at 400VAC. This miniature circuit breaker protects circuits against short circuit and overload currents. It has an IP20 degree of protection (as per IEC/EN 60529) on its terminals. It becomes IP40 once in modular enclosure with insulation class II. its fast closing mechanism improves its service life. Its limitation class 3 (according to EN/IEC60898-1) improves downstream circuit protection cost. Its unique Visitrip indicator reduces intervention time by showing the faulty circuit. Its Visisafe green strip guarantees the physical opening of the contacts to allow downstream maintenance.

Schneider Electric iC40N Stromunterbrecher 1P + N

Schneider Electric iC40N Stromunterbrecher 3P + N

This Acti9 iC60N is a low voltage miniature circuit breaker (MCB). It is a 4P circuit-breaker with 4 protected poles, 16A rated current and C tripping curve. It can be mounted on DIN rail for modular installation. As circuit-breaker, its breaking capacity, according to IEC/EN 60898-1, is 6000A at 400VAC. As circuit-breaker, its breaking capacity, according to IEC/EN 60947-2, is 20kA at 230VAC and 10kA at 400VAC. This miniature circuit breaker protects circuits against short circuit and overload currents. It has an IP20 degree of protection (as per IEC/EN 60529) on its terminals. It becomes IP40 once in modular enclosure with insulation class II. its fast closing mechanism improves its service life. Its limitation class 3 (according to EN/IEC60898-1) improves downstream circuit protection cost. Its unique Visitrip indicator reduces intervention time by showing the faulty circuit. Its Visisafe green strip guarantees the physical opening of the contacts to allow downstream maintenance.

TeSys GV2 & GV3 - auxiliary contact - 1 NO + 1 NC

Acti9 IC60 RCBO 2P 16A 30mA C 10kA A. Zum Schutz des Endkreises und zum Schutz von Personen vor elektrischem Schock bei direktem Kontakt (30 mA). Sowie Erdschluss an der Frontplatte

iC60N - Leitungsschutzschalter - 4P - 13A - C-Kurve

This Acti9 iC60N is a low voltage miniature circuit breaker (MCB). It is a 3P+N circuit-breaker with 3 protected poles, 20A rated current and C tripping curve. It can be mounted on DIN rail for modular installation. As circuit-breaker, its breaking capacity, according to IEC/EN 60898-1, is 6000A at 400VAC. As circuit-breaker, its breaking capacity, according to IEC/EN 60947-2, is 20kA at 230VAC and 10kA at 400VAC. This miniature circuit breaker protects circuits against short circuit and overload currents. It has an IP20 degree of protection (as per IEC/EN 60529) on its terminals. It becomes IP40 once in modular enclosure with insulation class II. its fast closing mechanism improves its service life. Its limitation class 3 (according to EN/IEC60898-1) improves downstream circuit protection cost. Its unique Visitrip indicator reduces intervention time by showing the faulty circuit. Its Visisafe green strip guarantees the physical opening of the contacts to allow downstream maintenance.

Dieser Acti9 iC60N ist ein Niederspannungs-Miniatur-Leitungsschutzschalter (MCB). Es handelt sich um einen 3P+N Leitungsschutzschalter mit 3 geschützten Polen, einem Nennstrom von 16A und einer C-Auslösekurve. Er kann auf einer DIN-Schiene für eine modulare Installation montiert werden. Als Leitungsschutzschalter beträgt seine Auslösekapazität gemäß IEC/EN 60898-1 bei 400VAC 6000A. Als Leistungsschalter beträgt seine Auslösekapazität gemäß IEC/EN60947-2 bei 230VAC und bei400VAC jeweils20kA bzw.10kA. Dieser Miniatur-Leitungsschutzschalter schützt Schaltkreise vor Kurzschluss- und Überlastströmen.Er hat einen IP20-Schutzgrad (gemäß IEC/EN60529) an seinen Anschlüssen, der sich in einem modularen Gehäuse mit Isolationsklasse II auf IP40 erhöht.Sein schneller Schließmechanismus verbessert die Lebensdauer.Die Begrenzungsklasse III (gemäß EN/IEC60898-1) verbessert den Kostenschutz nachgeschalteter Schaltkreise.Sein einzigartiger Visitrip-Anzeiger reduziert die Interventionszeit durch Anzeigen des fehlerhaften Stromkreises.Das Visisafe grüne Band garantiert das physische Öffnen der Kontakte zur Durchführung von Wartungsarbeiten stromabwärts. Dieser doppelte Terminal-Miniatur-Leitungsschutzschalter spiegelt die Schneider Electric-Expertise wider, die seit mehr als 40 Jahren modulare Geräte für den Schutz elektrischer Schaltkreise in allen Anwendungen entwickelt hat. Er hat eine längere Lebensdauer dank seiner hohen Begrenzung und schnellen Schließung. Dieses Produkt entspricht sowohl IEC 60898-1 als auch IEC 60947-2, verfügt über IP20B fingerfeste Anschlüsse mit doppelter Anzugskraft im Vergleich zum Standard und ist auf einer DIN-Schiene montierbar.Es bietet VisiTripTM für Sicherheit während der Wartung und VisiSafeTM zur Reduzierung der Interventionszeit an.

Modularer Sicherheitstransformator iTR - 230 V 50...60 Hz - Ausgang 12...24 V - 25 VA

3-Phasen-Kilowattstundenmesser für DIN-Schienenmontage mit Zähler und Impulsausgang - MID-zertifiziert. Dieses Modell bietet eine direkte Messung von E bis zu 1 / 5A (abhängig von CT). Die iEM3000-Serie bietet eine kosteneffektive und wettbewerbsfähige Auswahl an 3-Phasen-DIN-Schienen

Schneider Electric iC60 RCBO Stromunterbrecher 4P