Bosch Schleifmaschine - Seite 24

Sanding paper J450 Expert for Wood and Paint, width: 115 mm, length: 5 m, grit: 80

Schleifteller bietet 180 mm Durchmesser und K80-Körnung für Oberflächenvorbereitung und Materialabtrag.

Bosch Schleifteller PWR 180 mm K80 ist ausgelegt für Arbeiten an Stein, Gipskarton, Holzwerkstoffen wie Bauholz, beschichteten Platten, Leisten, Spanplatten und Weichholz sowie Beschichtungen wie Farbe und Beize und mineralischen Oberflächen einschließlich Beton und Mörtel.

Schleifpapierbogen-Set mit 25 dreieckigen Blättern für Delta-Schleifer, Körnung 120, mit 6 Staubabsauglöchern.

Bosch Schleifblatt-Set mit 25 Stk. für Delta-Schleifer, Körnung 120 ist für Schleif- und Polierarbeiten ausgelegt und bietet ein gleichmäßiges Finish in Körnung 120 im Dreiecksformat für präzises Arbeiten.

Bosch Expert C470 schleifrolle

Bosch Expert C470 Schleifpapier

Bosch Expert C470 schleifrolle

Bosch Expert C470 schleifrolle

Bosch N880 Schleifblatt Sehr feine Körnung 2 Stück(e)

Bosch Expert C470 schleifrolle

Schleifpapier, 50 Stücke, rechteckig, Körnung: P240, 93 mm x 186 mm

Bosch C470 Farbe, Holz Tellerschleifer

The F460 Best for Wood and Paint ensures exceptional finish when sanding and grinding wood as well as painted surfaces. Its F/E backing pads are extremely durable, allowing for continuous sanding and providing professional results. In addition, the semi-loose quality abrasive grains of aluminum oxide and silicon carbide material remove material with extreme precision, ensuring perfect surface results. The sanding sheet is designed for flat sanding of edges and edge strips, processing of smaller surfaces as well as medium-fine and fine grinding of surfaces, edges, and folds. The sanding sheet is also ideal for roughening up and intermediate grinding of primers, putty filler, and lacquer. The blade is covered with strong semi-loose abrasive grains of aluminum oxide and silicon carbide that ensure uniform surface quality. The abrasive sheet is electrostatically open to remove material with high precision ensuring optimal grinding performance. Additionally the abrasive grain is attached to the F/E backing pads using a fully synthetic resin that ensures high wear resistance for tough tasks while providing long life span.The F460 Best for Wood & Paint Sandpaper fits delta grinders & multi-cutters.
Package contains 5 sheets'

Schleifwalze, für Kunststoff, Weichholz, Hartholz, furniertes Holz, Gipskartonplatten, Farbe auf Holz, Körnung: P240, 93 mm x 5 m

C470 Best for Wood and Paint has an exceptionally high material removal rate. The product's calcium stearate coating prevents clogging. Additionally, the electrostatic, open surface with spaces between the grains ensures uniform, controlled and consistent dust removal. The sanding sheet is developed for sanding wood and coatings such as lacquer, putty layers, spackle as well as synthetic and solid materials such as polymers (Corian, Varicor). The product is made of C/B paper covered with strong semi-open aluminum oxide abrasive grains that ensure consistent quality. Quick replacement and easy handling thanks to the hook-and-loop closure system. C470 Best for Wood and Paint sanding sheet fits all common orbital sanders.
Package of 50 pieces.

F355 Best for Coatings and Composites ensures an impressive finish when sanding and grinding abrasive surfaces and composite materials. Blades with silicon carbide abrasive grains ensure precise material removal for professional results. In addition, the electrostatic, open surface with spaces between the grains ensures uniform dust removal, preventing clogging. The sanding roll is developed for grinding hard materials such as stone and composite material as well as intermediate sanding in painting work. It is also suitable for sanding and grinding of varnish, paint, primer, putty and plastic. Also suitable for precision work on ferrous and non-ferrous materials. F355 Best for Coatings and Composites has a closed antistatic coating to reduce dust adhesion on the subject or machine. The abrasive grain is attached using a fully synthetic resin bond ensuring exceptional durability in tough tasks. The product's backing material is F/C paper for optimal sanding properties.F355 Best for Coatings and Composites-sanding sheet fits all common flat grinders.
Package of 5 pieces.

F355 Best for Coatings and Composites ensures an impressive finish when sanding and grinding abrasive surfaces and composite materials. Blades with silicon carbide abrasive grains ensure precise material removal for professional results. In addition, the electrostatic, open surface with spaces between the grains ensures uniform dust removal, preventing clogging. The sanding roll is designed for grinding hard materials such as stone and composite materials as well as intermediate sanding in painting work. It is also suitable for sanding and grinding paint, primer, putty, and plastic. Also suitable for precision work on ferrous and non-ferrous materials. F355 Best for Coatings and Composites sandpaper fits angle grinders. F355 Best for Coatings and Composites has a closed antistatic coating to reduce dust adhesion to the workpiece or machine. The abrasive grain is attached using a fully synthetic resin bond that ensures exceptional durability in tough tasks. The product's backing material is F/C paper for optimal grinding properties.
Package of 10 pieces.

C430 Expert for Wood and Paint has an impressively long lifespan when sanding wood, veneer, and solid surfaces. In addition, the electrostatic, open surface with spaces between the grains ensures uniform sanding and prevents clogging. The strong abrasive grains are resistant to wear, allowing for prolonged and repeated use. This product is intended for cleaning up and sanding paint, varnish, putty, primer and wood-based materials; it is suitable for intermediate sanding of lacquer on surfaces. It is also suitable for sanding after wetting certain materials as well as smoothing out feather edges. The fully synthetic resin-bonded grains provide a long lifespan. The extremely flexible C-/B-paper backing allows the product to be folded without cracking forming. Sandpaper C430 Expert for Wood and Paint fits triangular sanders.
Package of 5 pieces.

F355 Best for Coatings and Composites ensures an impressive finish when sanding and grinding abrasive surfaces and composite materials. Blades with silicon carbide abrasive grains ensure precise material removal for professional results. In addition, the electrostatic, open surface with spaces between the grains ensures uniform dust removal, preventing clogging. The sanding roll is developed for grinding hard materials such as stone and composite material as well as intermediate sanding in painting work. It is also suitable for sanding and grinding of varnish, paint, primer, putty and plastic. Also suitable for precision work on ferrous and non-ferrous materials. F355 Best for Coatings and Composites has a closed antistatic coating to reduce dust adhesion on the subject or machine. The abrasive grain is attached using a fully synthetic resin bond ensuring exceptional durability in tough tasks. The product's backing material is F/C paper for optimal sanding properties.F355 Best for Coatings & Composites fits all common belt sander machines.
Package of 5 pieces.

F355 Best for Coatings and Composites ensures an impressive finish when sanding and grinding abrasive surfaces and composite materials. Blades with silicon carbide abrasive grains ensure precise material removal for professional results. Additionally, the electrostatic, open surface with spaces between the grains ensures consistent dust removal to prevent clogging. The sanding roll is designed for grinding hard materials such as stone and composite materials as well as intermediate sanding during painting work. It is also suitable for sanding and grinding paint, primer, putty, and plastic. Also suitable for precision work on ferrous and non-ferrous materials. F355 Best for Coatings and Composites has a closed antistatic coating to reduce dust adhesion on the workpiece or machine. The abrasive grain is attached using a fully synthetic resin bond which ensures exceptional durability in tough tasks. The product's backing material is F/C paper for optimal sanding properties. The F355 Best for Coatings and Composites abrasive sheet fits all common flat grinders.
Package of 5 pieces.

F355 Best for Coatings and Composites ensures an impressive finish when sanding and grinding abrasive surfaces and composite materials. Blades with silicon carbide abrasive grains ensure precise material removal for professional results. In addition, the electrostatic, open surface with spaces between the grains ensures uniform dust removal, preventing clogging. The sanding roll is developed for grinding hard materials such as stone and composite material as well as intermediate sanding in painting work. It is also suitable for sanding and grinding of varnish, paint, primer, putty and plastic. Also suitable for precision work on ferrous and non-ferrous materials. F355 Best for Coatings and Composites has a closed antistatic coating to reduce dust adhesion on the subject or machine. The abrasive grain is attached using a fully synthetic resin bond ensuring exceptional durability in tough tasks. The product's backing material is F/C paper for optimal sanding properties.F355 Best for Coatings and Composites-sanding sheet fits all common flat grinders.
Package of 5 pieces.

F355 Best for Coatings and Composites ensures an impressive finish when sanding and grinding abrasive surfaces and composite materials. Blades with silicon carbide abrasive grains ensure precise material removal for professional results. Additionally, the electrostatic, open surface with spaces between the grains ensures consistent dust removal to prevent clogging. The sanding roll is designed for grinding hard materials such as stone and composite materials as well as intermediate sanding during painting work. It is also suitable for sanding and grinding paint, primer, putty, and plastic. Also suitable for precision work on ferrous and non-ferrous materials. F355 Best for Coatings and Composites has a closed antistatic coating to reduce dust adhesion on the workpiece or machine. The abrasive grain is attached using a fully synthetic resin bond which ensures exceptional durability in tough tasks. The product's backing material is F/C paper for optimal sanding properties. The F355 Best for Coatings and Composites abrasive sheet fits all common flat grinders.
Package of 5 pieces.

Zu AEG, Black & Decker, Kress, Metabo...

Schleifblatt-Set für Bohrmaschine mit 10 Teilen, 125 mm Durchmesser und Körnungen 40, 60, 80, 120 und 180.

Bosch Schleifblatt-Set mit 10 Stk. für Bohrmaschine ist für den Einsatz auf Beschichtungen wie Farbe, kratzfestem Lack und Spachtelmasse sowie auf Holzmaterialien einschließlich Spanplatten, Verbundwerkstoffen, Weichholz und Hartholz/Massivholz ausgelegt.

Für Black & Decker, ...

Schleifpapierset, 25 Stücke, rechteckig, Körnung: 60, 80, 120, 240, 93 mm x 230 mm