Rycote - Seite 4

Virtually flat frequency response from 70Hz to 20KHz

RYCOTE Single Lyre 62 19/25 Pair, Modular Adaptor & Screws

The Rycote Modular Windshield WS 9 Kit is designed to offer outstanding wind protection for professional outdoor audio recordings. Its modular design ensures flexibility, allowing it to be configured for various microphone setups while maintaining crystal-clear sound quality.

Suspension Kit Heavy Duty for Portable Recorder

Size D

Included:
1 x 10 cm Hot Shoe Extension
1 x InVision Video Hot Shoe 042901
1 x 3/8" Boom Swivel with Lever 047308
1 x Hot Shoe 3/8"Adaptor 037302
1 x Camera Mic Clamp / Hot Shoe Adaptor 037319
1 x 1/4" Adaptor with 19mm washer 037321
1 x 15cm Classic-Softie (19/22) 033042

Designed for a Nano Shield NS4-DB

The 18cm Large Hole SGM Foam with 24mm/25mm Windscreen is designed for shotgun microphones to reduce wind noise and handling sounds during outdoor recordings. The foam provides excellent protection against wind interference, while the large hole ensures compatibility with a variety of microphones.

Fits shotgun mics up to 15cm from the front of the mic

Fits any large-diaphragm recording microphone with a diameter between 18 and 55mm

NPUT
Input connector: XLR -3F
Input Connbox Connector: Hardwired
Input Cable outside diameter: 2.5mm
Input Cable Exposed Length: 130mm
Input Cable Band Colour: Plain

OUTPUT
Output Connector: XLR – 3M
Output Connbox Connector: Hardwired
Output Cable Outside Diameter: 4.8mm
Output Cable Exposed Length: 450mm
Output Cable Band Colour: Plain

20 x 25cm

The RYCOTE Windshield Kit Modular WS 3 XLR-5F is a professional microphone windshield designed to provide excellent wind protection. Ideal for outdoor recording, it ensures crystal-clear sound quality by reducing wind noise and unwanted interference.

Suitable for 5cm SGM Foam

The Rycote BBG Windjammer is a high-performance windscreen designed to reduce wind noise for microphones. Its durable construction and superior noise reduction capabilities make it ideal for outdoor recording in challenging wind conditions. The BBG Windjammer is easy to install and provides excellent protection for your equipment.

Nano-Shield 60Hz Filter Cable 22cm, XLR3

Weatherproof cover for mono and stereo windshields

Specifications
Frequency Range: 40Hz - 18 kHz
Self Noise: 18.0 dB-A
Polar Pattern: Bi Directional
Capsule Type: Back Electret Condenser
Output Sensitivity: 14.2 mV/Pa (-32.7 dB)
Max. Output Voltage: 4 Vp
Output Impedence: 100 Ω
Min. Load Impedance: 1 k Ω
Signal / Noise Ratio: 78 dB typical (@ 1 kHz/Pa A-weighted)
CMRR (@ 1 kHz): > 60 dB
Max. Cable Length: 100 m
Powering: P-48
Powering Valid Range: 48-24V (Max SPL reduced at 24V)
Current Consumption: 3.0 mA
Max. SPL:
135 dB SPL (at 1 kHz 1.0%
THD Typical)
129 dB SPL (at 1 kHz 0.5%
THD Typical
RFI Shield: Yes
Connector: XLR-3M

Nano-Shield 60Hz Filter Cable 22cm, MZL

Microphone SC-8 Stereo Pair Supercardiod

Rycote Stickies Advanced, 23mm O's (Pack) are high-quality adhesive pads designed to securely attach microphones or accessories to various surfaces. These pads reduce unwanted vibrations and minimize noise interference, making them ideal for field recordings and professional audio applications.

Size A

Fits over 45/100 foam of Large Diaphragm Condensers.

RYCOTE Super-Softie 15cm 19/22

Maximum Wind-noise Attenuation: 12 dB