Schneider Electric Komponenten für Schaltkästen und Schränke - Seite 10

Schneider Electric LC1D128P7 Hilfskontakt

iC60N - Mini-Leitungsschutzschalter - 3P - 13A - C-Kurve

This Acti9 iC60N is a low voltage miniature circuit breaker (MCB). It is a 2P circuit-breaker with 2 protected poles, 32A rated current and C tripping curve. It can be mounted on DIN rail for modular installation. As circuit-breaker, its breaking capacity, according to IEC/EN 60898-1, is 6000A at 400VAC. As circuit-breaker, its breaking capacity, according to IEC/EN 60947-2, is 20kA at 230VAC and 10kA at 400VAC. This miniature circuit breaker protects circuits against short circuit and overload currents. It has an IP20 degree of protection (as per IEC/EN 60529) on its terminals. It becomes IP40 once in modular enclosure with insulation class II. its fast closing mechanism improves its service life. Its limitation class 3 (according to EN/IEC60898-1) improves downstream circuit protection cost. Its unique Visitrip indicator reduces intervention time by showing the faulty circuit. Its Visisafe green strip guarantees the physical opening of the contacts to allow downstream maintenance.

iC60N - Leitungsschutzschalter - 1P - 0,5A - C-Kurve

impulse relay iTLI - 2P - 1NO+1NC - 16A - coil 110 VDC - 230...240 VAC 50/60Hz

C60SP are multi-standard miniature circuit breakers and supplementary protectionas defined by UL 1077. It combines following functions:bbcircuit protection against short-circuit currentsbbcircuit protection against overload currentsbb tripping and fault i

socket RPZ - mixed contact - 16 A - < 250 V - screw clamp - for relay RPM3..

iC60L - Mini-Leitungsschutzschalter - 2-polig - 2A - C-Kurve

Türverriegelung - Satz von 5

Zelio RSB are a series of compact plug-in relays with a width of only 16 mm.The relays are available with 1 C/O with either 12 and 16A or 2 C/O contacts with 8A maximum load.It is possible to insert a protection module (diode, varistor or RC-circuit) into the relay socket if needed.The sockets RSZE1S35M and RSZE1S48M has separate terminals for supply and load which simplify troubleshooting and mounting of the relays.RSB1A120P7PV is a complete plug-in relay mounted into a RSZE1S35M socket with a maintaining clamp, which secure that the relay stays in the socket even in an environment with vibrations.The socket has a varistor interserted for protection against voltage spikes generated by coils in the panel.The varistor module has also a build-in LED for indication of supply to the relay.RSB1A120P7PV has a 1 C/O AgNI contact with a maximum load of 12A.The relay has a lifetime of 100.000 cycles (depending on load).Supply voltage to the RSB1A120P7PV is 230 VAC and average coil co

iC60N - Leitungsschutzschalter - 3P + N - 10A - B-Kurve

Acti9 IC60 RCBO 4P 32A 300mA C 6kA A. For protection of end circuit, and protection of people against electric shock at direct contact ( 30 mA). As well as earth leakage at front plate.

4 Anschlüsse - 6 Kabel - 1,5..35 mm2

Metallhaltende Klemme - für Miniatur-Relaissockel RXZ

iCT 25A 3NO 220...240V 60Hz Schütz

TeSys K Wendekontaktor - 3P(3 NO) - AC-3 - <= 440 V 9 A - Spule 24 V DC

Schaltlasttrennschalter VBD - 3 - 690 V 25 A - abschließbarer schwarzer Griff

Acti9 iIL Doppelanzeigelampe - Grün/Rot - 12-48 Vac/dc

Schneider Electric iETL iTL Leistungsrelais Weiß 2P

spreader set - 52.5 mm pitch - flat connection - 4 poles

This Resi9 product is a low voltage miniature circuit-breaker (MCB). It is a 3P+N circuit breaker with 3 protected pole and 10A In rated current and C tripping curve. The Icn rated short-circuit breaking capacity is up to 6000A at 400VAC with operating frequency of 50Hz to 60Hz conforming to EN/IEC 60898-1 standard. This miniature circuit-breaker protects circuit against short-circuit and overload current. This product complies with EN/IEC 60898-1 standard. The electrical endurance is up to 7500 cycles and the mechanical endurance is up to 20000 cycles. The Resi9 is targeted to residential for individual and collective buildings. This circuit-breaker has an ON/OFF indication for local signalling with toggle control. It has a tunnel type terminals connection at top or bottom. The connection allows rigid copper cables. The cable cross section capacity is from 1mm2 to 16mm2. The connection allows flexible copper cables. The cable cross section capacity is from 1mm2 to 10mm2. The connection allows flexible with ferrule copper cables. The cable cross section capacity is from 1mm2 to 10mm2. The Ue rated operational voltage is up to 400VAC with operating frequency of 50Hz to 60Hz. The Ui rated insulation voltage is up to 440VAC. The Uimp rated impulse withstand voltage is 4kV. The overvoltage category is 3. It can be mounted on DIN rail for modular installation. The width in 9mm pitch is 6. The dimensions are (W) 54mm x (H) 81mm x (D) 73.5mm. The product colour is white (RAL 9003). The product weight is 320g. The pollution degree is 2 conforming to EN/IEC 60898-1 standard. The relative humidity is 95% at 55°C. The level of tropicalisation is 2 conforming to IEC 60068-1 standard. The limitation class is 3 conforming to EN/IEC 60898-1 standard. The wire stripping length is 13mm (top or bottom). The tightening torque of connection is 2N.m (top or bottom) for PZ2 screwdriver type. According to IEC 60529 standard, the IP degree of protection is IP20 and becomes IP40 once in mod

TeSys GV2 - Leistungsschalter - magnetisch - 25 A - Schraubklemmen

Schneider Electric Linergy DX Elektrische Abdeckung

Schneider Electric A9C20134 Hilfskontakt

Schneider Electric A9XAH257 Nicht kategorisiert