Hager Komponenten für Schaltkästen und Schränke - Seite 2

Motorstarter zum Schutz von 1- und 3-Phasen-Motoren

MCB 3P 6KA C-10A 3M: "Leitungsschutzschalter (LS-Schalter) 3-polig, Nennstromauslöser bei Überlast und Kurzschluss von 6 kA, Nennstromstärke von 10 A und eine Länge von 3 Metern

Hager ESD225S Elektrogehäusezubehör

Hager ADM466C Elektrogehäusezubehör

Kontaktor 25A 2NO 230VAC Standard zur Steuerung von Schaltkreisen ausgestattet mit Hilfskontakt und Dichtkappen Nennbetriebsspannung: 230 V Frequenz: 50/60Hz Anschlusstyp: Mit Schraube Betriebstemperatur: -10 bis 50 ° C Lagertemperatur: -40 bis 80 ° C Anschlussquerschnitt starres Kabel:1 /10mm2 Anschlussquerschnitt flexibles Kabel :1 /6mm2 Zur Reduzierung der gegenseitigen Erwärmung bei Verwendung mehrerer Kontaktoren wird empfohlen, den LZ060-Abstandshalter zu verwenden Modulanzahl :1 Gemäß Standard :EN61095

Kontaktor 25A 4NO 230V Standard zur Steuerung von Schaltkreisen Kann mit Hilfskontakt und Dichtkappen ausgestattet werden Nennbetriebsspannung: 400 V Frequenz: 50/60 Hz Anschlusstyp: Mit Schraube Betriebstemperatur: -10 bis 50 ° C Lagertemperatur: -40 bis 80 ° C Anschlussquerschnitt starres Kabel:1 /10mm2 Anschlussquerschnitt flexibles Kabel :1 /6mm2 Zur Reduzierung der gegenseitigen Erwärmung bei Verwendung mehrerer Kontaktoren wird empfohlen, den LZ060-Abstandshalter zu verwenden Modulanzahl :2 Gemäß Standard :EN61095

Kabelanschluss 1P Stift 2 Kabel 16mm2

Klingeltransformator 16VA 8-12V 3M

For 14 circuit breakers 4P

Latching-Relais elektronisch 1NO 230V 1 ModulNennbetriebsspannung: 230VKontakttyp: 1NOVerbindungstyp: Mit SchraubeFrequenz: 50/60Hz

MCB 3P+N 6KA C-32A 4M: Leitungsschutzschalter (LS-Schalter) dreipolig + Neutralleiter, Nennstrom 32 Ampere, Kurzschlussfestigkeit von 6 kA und eine Einbaubreite von vier Modulen

RCBO 1P+N 6kA C-16A 30mA A Technische Daten: Auslösekurve: C Pole: 2 Pole Nennlast (In): 16 A Nennspannung (Un): 230V +10% / -15% Nennausgangsstrom (Idn): 30mA Empfindlichkeitsklasse A Frequenz:50Hz Bewerteter Durchbruch:6kA in h.t. EN61009-1 IP-Schutzart :IP2x montiert im Gehäuse Temperatur :30°C in h.t. EN61009-1 Verschmutzungsgrad :2 in h.t. EN61009-1

Contactor 25A 1NO+1NC 230V Standard for the control of circuitsCan be equipped with auxiliary contact and sealig capsRated operational voltage: 230 V Frequency: 50/60Hz Type of connection: With screw Operating temperature: -10 to 50 ° C Storage temperature: -40 to 80 ° C Connection cross-sect rigid cable: 1 / 10mm2 Connection cross-sect. flexible cable: 1 / 6mm2 To reduce the mutual heating when using several contactorsit is recommended to use the LZ060 spacerNumber of modules: 1According to standard: EN 61095

Safety transformer with galvanic isolation between primary and secondary windings.
All transformers are thermally overload and short circuit protected.
Rated voltage: 230V / 12-24VAC
Load: 40VA
Rated current: In 12V/ 3.33A
Rated current: In 24V/ 1.67A
Ambient temperature: max. 35grC
Standard: EN61558
Dimensions: 4 modules of 17.5mm

Contactor 25A 4NC 230V Standard for the control of circuitsCan be equipped with auxiliary contact and sealig capsRated operational voltage: 400 V Frequency: 50/60Hz Type of connection: With screw Operating temperature: -10 to 50 ° C Storage temperature: -40 to 80 ° C Connection cross-sect rigid cable: 1 / 10mm2 Connection cross-sect. flexible cable: 1 / 6mm2 To reduce the mutual heating when using several contactorsit is recommended to use the LZ060 spacerNumber of modules: 2According to standard: EN 61095

Relay 16A 1NO+1NC 24VFor control of circuitsA control device with 3 positions on the frontRated operating voltage AC: 230V AC control voltage: 24 Frequency: 50/60Hz Operating temperature: -10 to 50 ° C Connection cross-section with flexible conductor: 1 - 6mm 2 Cross-sectional area for rigid conductors: 1 - 10mm 2 A lifetime mechanical operations: 1000000 Equipment life, electrical operations: 30000 Total power loss at rated power: 1.6 W Number of modules: 1

Modularer Schalt-Lasttrennschalter 2-polig 25A 230V 1M zum Abschalten aller Stromkreise. Kategorie: AC22A, Nennstrom: 16A bis 32A Größe 1. Anschlussklemmen: starre Leiter bis zu 16mm2 - flexible Leiter bis zu10mm2

Contactor 25A 2NO 24V Standard for the control of circuitsCan be equipped with auxiliary contact and sealig capsRated operational voltage: 230 V Frequency: 50/60Hz Type of connection: With screw Operating temperature: -10 to 50 ° C Storage temperature: -40 to 80 ° C Connection cross-sect rigid cable: 1 / 10mm2 Connection cross-sect. flexible cable: 1 / 6mm2 To reduce the mutual heating when using several contactorsit is recommended to use the LZ060 spacerNumber of modules: 1According to standard: EN 61095

Relay 16A 1NO+1NC 230VFor control of circuitsA control device with 3 positions on the frontRated operating voltage AC: 230V Frequency: 50/60Hz Operating temperature: -10 to 50 ° C Connection cross-section with flexible conductor: 1 - 6mm 2 Cross-sectional area for rigid conductors: 1 - 10mm 2 A lifetime mechanical operations: 1000000 Equipment life, electrical operations: 30000 Total power loss at rated power: 1.6 W Number of modules: 1

Contactor 25A 4NO 24V 2MStandard for the control of circuitsCan be equipped with auxiliary contact and sealig capsRated operational voltage: 400 V AC control voltage: 24V Frequency: 50/60Hz Type of connection: With screw Operating temperature: -10 to 50 ° C Storage temperature: -40 to 80 ° C Connection cross-sect rigid cable: 1 / 10mm2 Connection cross-sect. flexible cable: 1 / 6mm2 To reduce the mutual heating when using several contactorsit is recommended to use the LZ060 spacerNumber of modules: 2According to standard: EN 61095

Contactor 25A 1NO 230VAC Standard for the control of circuitsCan be equipped with auxiliary contact and sealig capsRated operational voltage: 230 V Frequency: 50/60Hz Type of connection: With screw Operating temperature: -10 to 50 ° C Storage temperature: -40 to 80 ° C Connection cross-sect rigid cable: 1 / 10mm2 Connection cross-sect. flexible cable: 1 / 6mm2 To reduce the mutual heating when using several contactorsit is recommended to use the LZ060 spacerNumber of modules: 1According to standard: EN 61095

Latching relay 2NO 8V1 moduleRated operational voltage: 250VType of contacts: 2NOScrew connectionFrequency: 50/60Hz

Relay 16A 1NO+1NC 12VFor control of circuitsA control device with 3 positions on the frontRated operating voltage AC: 230V AC control voltage: 12Frequency: 50/60Hz Operating temperature: -10 to 50 ° C Connection cross-section with flexible conductor: 1 - 6mm 2 Cross-sectional area for rigid conductors: 1 - 10mm 2 A lifetime mechanical operations: 1000000 Equipment life, electrical operations: 30000 Total power loss at rated power: 1.6 W Number of modules: 1

Buzzer 220/240V 1M

Bell transformer 4VA 8-12V 2M