ABB Komponenten für Schaltkästen und Schränke - Seite 5

4-poliger, vorne bedienbarer, aufsteckbarer Schalt-Lasttrennschalter mit geschützten Klemmleisten für die DIN-Schiene. Griff und Welle sind nicht enthalten. Geeignet für Verteiler mit 45mm Schlitzen

System pro M compact S200 miniature circuit breakers are current limiting. They have two different tripping mechanisms, the delayed thermal tripping mechanism for overload protection and the electromechanic tripping mechanism for short circuit protection. They are available in different characteristics (B,C,D,K,Z), configurations (1P,1P+N,2P,3P,3P+N,4P), breaking capacities (up to 6 kA at 230/400 V AC) and rated currents (up to 63A). All MCBs of the product range S200 comply with IEC/EN 60898-1, IEC/EN 60947-2, UL1077 and CSA 22.2 No. 235, allowing the use for residential, commercial and industrial applications. Bottom-fitting auxiliary contact can be mounted on S200 to save 50% space.

Shaft for selector type handle.

Frontbedienbarer Schalter-Lasttrennschalter. Typen OT 16...125 enthalten geschützte Klemmen, IP 20.

Frontbedienbarer Schalter-Lasttrennschalter. Typen OT 16...125 enthalten geschützte Klemmen, IP 20.

Frontbedienbarer Schalter-Lasttrennschalter. Typen OT 16...125 enthalten geschützte Klemmen, IP 20.

Frontbedienbarer Schalter-Lasttrennschalter. Typen OT 16...125 enthalten geschützte Klemmen, IP 20.

Zubehör für den Schalter

Wählschaltergriff. Anzeige I-O und AN-AUS. Keine separate Welle erforderlich. Mit max. 3 Vorhängeschlössern abschließbar, IP 65, Lochabstand 36/48 mm, NEMA 1, 3R, 12, rot-gelb, OT16...125FT

Frontbedienbarer Schalter-Lasttrennschalter. Typen OT 16...125 enthalten geschützte Klemmen, IP 20.

System pro M compact S200 miniature circuit breakers are current limiting. They have two different tripping mechanisms, the delayed thermal tripping mechanism for overload protection and the electromechanic tripping mechanism for short circuit protection. They are available in different characteristics (B,C,D,K,Z), configurations (1P,1P+N,2P,3P,3P+N,4P), breaking capacities (up to 6 kA at 230/400 V AC) and rated currents (up to 63A). All MCBs of the product range S200 comply with IEC/EN 60898-1, IEC/EN 60947-2, UL1077 and CSA 22.2 No. 235, allowing the use for residential, commercial and industrial applications. Bottom-fitting auxiliary contact can be mounted on S200 to save 50% space.

Frontbedienbarer Schalter-Lasttrennschalter. Typen OT 16...125 enthalten geschützte Klemmen, IP 20.

AF09 contactors are used for controlling power circuits up to 690 V AC and 220 V DC. They are mainly used for controlling 3-phase motors, non-inductive or slightly inductive loads. AF... contactors include an electronic coil interface accepting a wide control voltage Uc min. ... Uc max. Only four coils cover control voltages between 24...500 V 50/60 Hz or 20...500 V DC. AF contactors can manage large control voltage variations. One coil can be used for different control voltages used worldwide without any coil change. AF contactors have built-in surge protection and do not require additional surge suppressors. The AF... series 1-stack 3-pole contactors are of the block type design. - Main poles and auxiliary contact blocks: 3 main poles, 1 built-in auxiliary contact, front and side-mounted add-on auxiliary contact blocks (mechanically-linked auxiliary contacts compliant with Annex L of IEC 60947-5-1. N.C. mirror contacts compliant with Annex F of IEC 60947-4-1) - Control circuit: AC or DC operated - Accessories: a wide range of accessories is available.

Die RCCBs F200 Serie sorgt dafür, dass Menschen und Installationen gegen Fehlerströme zur Erde geschützt sind. Ein großes Angebot an Standard-Sofort- und Selektiv-AC- und A-Typen wird durch einige Konfigurationen für spezielle Anwendungen ergänzt.

MS116-2.5 manual motor starter is a compact 45 mm width devices with a rated operational current of Ie = 2.5 A. This device is used to manually switch on and off motors and to protect them reliably and without the need for a fuse from short-circuits, overload and phase failures. The manual motor starter offers a rated service short-circuit breaking capacity Ics = 50 kA at 400 VAC and the trip class 10A. Further features are the build-in disconnect function, temperature compensation, trip-free mechanism and a rotary handle with a clear switch position indication. The manual motor starter is suitable for three- and single-phase applications. Auxiliary contacts, signalling contacts, undervoltage releases, shunt trips, 3-phase bus bars, power in-feed blocks and locking devices for protection against unauthorized changes are available as accessory.

Frontbedienbarer Schalter-Lasttrennschalter. Typen OT 16...125 enthalten geschützte Klemmen, IP 20.