Instrumente - Seite 13

Fluke tl175 twistguardTMTM testledninger

Patented TwistGuardTM extendable tip shroud meets the highest electrical safety requirements to reduce tip exposure while providing the versatility needed for most measurementsNew WearGuardTM lead wire wear indication. Each test lead is covered by two layers of silicone insulation, inner contrasting color is exposed when the leads are nicked, scuffed, or otherwise damaged and in need of replacementDouble insulated silicone leads. TL175 test leads withstand high temperatures and remain flexible in cold temperatures.Extra-heavy duty strain relief on both probe-end and plug-end, tested beyond 30,000 bends without failure.Universal input plugs are compatible with all instruments that accept standard 4 mm shrouded banana plugsRatings: CAT II 1000 V, CAT III 1000 V, CAT IV 600 V, 10 A max., Pollution Degree 2TL175E also available. Includes removable 4 mm lantern tips that thread onto the lead tipProbes always show correct category rating for tip being usedEnvironmental ratings: -20 °C to 55 °C (-4 °F to 131 °F), altitude: 2000 m (6,562 ft)Conforms to EN61010-031

54,42 € (45,35 €)

Verfügbar - 3-5 Werktage Lieferzeit

Fluke intellitone pro 200 lan toner and probe

Netzwerktester-Set

370,27 € (308,56 €)

Verfügbar - 3-5 Werktage Lieferzeit

Fluke 87-v multimeter

Designed to Identify Complex Signal Problems FastWhen productivity is on the line and you need to solve problems fast, the Fluke 87V delivers the accuracy and advanced troubleshooting capabilities you need. Designed specifically to handle complex signals, the 87V industrial multimeter, allows you to gain productivity by taking the guesswork out of drive system troubleshooting even in loud, high energy, and high altitude locationsSpecificationsVoltage DCMaximum voltage1000 VAccuracy±(0.05% + 1)Maximum resolution10 VVoltage ACMaximum voltage1000 VAccuracy±(0.7% + 2) True RMSAC bandwidth20 kHz with low pass filter, 3 db @ 1 kHzMaximum resolution0.1 mVCurrent DCMaximum amps10 A (20 A for 30 seconds maximum)Amps accuracy±(0.2% + 2)Maximum resolution0.01 ACurrent ACMaximum amps10 A (20 A for 30 seconds maximum)Amps accuracy±(1.0% + 2) True RMSMaximum resolution0.1 AResistanceMaximum resistance50 MAccuracy±(0.2% + 1)Maximum resolution0.1 CapacitanceMaximum capacitance9,999 Faccuracy±(1% + 2)Maximum resolution0.01 nFFrequencyMaximum frequency200 kHzAccuracy±(0.005% + 1)Maximum resolution0.01 HzDuty cycleMaximum duty cycle99.9%Accuracy±(0.2% per khz + 0.1%)Maximum resolution0.1%Temperature measurement–200.0°C – 1090°C–328.0°F – 1994.0°Fexcluding probe80 BK temperature probe–40.0°C – 260°C–40.0°F – 500°F, 2.2°C or 2% whichever is greaterConductanceMaximum conductance60.00 nSAccuracy±(1.0% + 10)Maximum resolution0.01 nSDiodeRange3 VResolution1 mVAccuracy±(2% + 1)Duty cycle rangeAccuracyWithin ±(0.2% per kHz + 0.1%)Environmental SpecificationsOperating temperature–20°C to + 55°CStorage temperature–40°C to + 60°CHumidity (without condensation)0% – 90% (0°C – 35°C)0% – 70% (35°C – 55°C)Operating Altitude2000 mSafety SpecificationsOvervoltage categoryEN 61010–1 to 1000 V CAT III, 600V CAT IVAgency approvalsUL, CSA, TUV, VDE listedMechanical and General SpecificationsSize201

691,20 € (576,00 €)

Verfügbar - 3-5 Werktage Lieferzeit

NEUHEIT

Elma Instruments 6660 process multimeter

Elma 6600 process multimeter is an indispensable instrument for every technician working with control and automation. As Elma 6600 is both a 0-24mA calibrator and standard TRMS multimeter, the instrument is suitable both to supply an automation circuit with an adjustable mA signal and measure when you need an ordinary true RMS multimeter- perfect for troubleshooting. Elma 6600 is supplied with large LCD display with light, automatically turned on when working in dark environment. When used as calibrator, the instrument has 3 main functions: • Supplying a passive current loop 0-24.000mA (internal battery supply 4.5V) • Simulating a 2 wire transmitter in an active current loop 0-24.000mA (External supply 6...48V) • Supplying a transmitter and monitoring the current in the loop (Loop power 24V/20mA) Elma 6600 has many additional functions making the instrument suitable for control and application troubleshooting. The test current can be set at either a locked value 0-24.000mA or run a programmed cycle. Four programmed cycles are available, with different scan/ramp intervals to select the one most suitable for your application. Elma 6600 is also a multimeter with all functions expected in a standard multimeter, like voltage, current, resistance, frequency, continuity with buzzer and diode test. The instrument also supports auto/manual range min/max/avg. and hold/relative. The build in memory is able to save 100 measurements. Afterwards the measurements can be viewed on the display or be transferred to PC. Cable and software are supplied with the instrument. Elma 6600 fulfills IEC 61010-1 Cat IV 600V. The instrument is delivered ready to use, with battery, test leads, crocodile clips, software and USB cable, manual and a strap to hang the instrument, so you have both hands free.

837,71 € (698,09 €)

Verfügbar - 3-5 Werktage Lieferzeit

Elma Instruments Safety crocodile clip 5004

Typ 5004, extra stark und robust, isolierte Krokodilklemme, 1000V/20A. Set mit einer roten und einer schwarzen. Technische Daten: IEC 61010: Kat III 1000V, Kat IV 600V

27,20 € (22,67 €)

Verfügbar - 3-5 Werktage Lieferzeit

Fluke 117 multimeter

VoltAlertTM technology for non-contact voltage detectionAutoVolt automatic AC/DC voltage selectionLow input impedance: helps prevent false readings due to ghost voltageLarge white LED backlight to work in poorly lit areasTrue RMS for accurate measurements on non-linear loadsMeasures 10 A (20 A overload for 30-seconds)Resistance, continuity, frequency and capacitanceMin/Max/Average with elapsed time to record signal fluctuationsCompact ergonomic design for one-handed operationCompatible with optional magnetic hanger (ToolPakTM) for hands free operationCAT III 600 V safety ratedIncludes:4 mm silicone test lead setHolsterUser manual

406,34 € (338,62 €)

Verfügbar - 3-5 Werktage Lieferzeit

Habotest Digital Multimeter with Flashlight HT118C True RMS NCV battery testing

The Habotest universal meter is an indispensable tool that provides precise measurement of parameters such as voltage, continuity or temperature, among others. The backlit display makes it easy to use. The built-in flashlight will allow you to work also in dark rooms, and with a special stand you can safely place the device on a flat surface. The product is also equipped with NCV sensors for non-contact voltage measurement. The meter supports manual range selection.

45,23 € (37,69 €)

Bestellware. 7-9 Tage Lieferzeit

Elma Instruments HT PV-Isotest 1500VDC insulation tester for solar cells

HT PV-Isotest 1500VDC isolationstester til solceller Produkt beskrivelse: HT PV-Isotest er det perfekte instrument hvis du skal idriftsætte og fejlfin...

2.093,05 € (1.744,21 €)

Verfügbar - 3-5 Werktage Lieferzeit

Elma Instruments HT65 multimeter 1500VDC/1000VAC

HT65 multimeter 1500VDC/1000VAC Produkt beskrivelse: HT65 tilbyder helt unikt 1500V DC skala, perfekt til f.eks. måling på solceller. For at forhindre...

225,80 € (188,17 €)

Verfügbar - 3-5 Werktage Lieferzeit

Fluke t6-600/eu multitester

Der Fluke T6-600 ist ein elektrischer Multitester, der perfekt auf die tägliche Arbeit des Elektrikers abgestimmt ist. Mit der eingebauten Gabel können Messungen von Strom und Spannung ohne elektrischen Kontakt mit dem Messobjekt durchgeführt werden. Die Fluke FieldSense-Technologie misst Spannungen bis zu 600V AC, die auf dem integrierten Display angezeigt werden, ohne dass Testleitungen benötigt werden. Strom bis zu 200A wird einfach über die eingebaute Gabel gemessen. Der Fluke T6-600 baut auf dem sehr beliebten T5-600 auf und bietet Neuigkeiten wie Widerstandsmessungen bis zu 1000, Frequenzmessung, Haltefunktion, traditionelle AC / DC-Spannungsmessungen bis zu 600V, hintergrundbeleuchtetes Display usw. Als Zubehör sind der Fluke TPAK Magnetic Hanger und Holder H-T6 erhältlich . Getestet und zugelassen gemäß EN61010-1 CAT III 600V. Zwei Jahre Garantie.

353,76 € (294,80 €)

Verfügbar - 3-5 Werktage Lieferzeit

Fluke tl76 alt-i-et testledningssæt

Fluke TL76 2mm/4mm Test Lead SetOne pair (red, black) 1.5 meter long silicone test leads with right angle shrouded banana plugLantern tip (removable) for use with European wall sockets (4 mm Ø )Lantern tip can be removed for easy access to terminal blocks (2 mm Ø)Removable, insulated IC caps allow probing on closely spaced leads and compliance with GS38CAT II 1000 V, 10 A ratingCAT III 1000 V, CAT IV 600V only with protective cap

80,03 € (66,69 €)

Verfügbar - 3-5 Werktage Lieferzeit

Fluke t150 voltage tester

The Fluke two-pole testers are now more rugged and easier to use than ever before.Fast test results the way you need them, with large, easy-to-use buttons, bright backlights, and clear audible and physical indicators designed for any work situation.Rugged, high-quality construction is built to last. This includes a heavy duty molded case, a thicker cord with wear indicator, sturdy battery case, and well-fitting and durable probe protector.Enhanced ergonomic design feels good in your hand, is easy to use (even with gloves on) and quick, secure probe docking.A complete family of testers with the features, functions, and price/performance to fit your applications and preferences.SpecificationsVoltage AC/DC 6V - 690VContinuity 0 - 400 kFrequency 0 / 40 - 400 HzPhase rotation 100 V - 690 VResistance measurement Up to 1999 Response Time (LED indicator) < 0.5 s200 k input impedance Current draw 3,5 mA @ 690 V Current draw 1,15 mA @ 230 V7k input impedance (with load buttons pressed) Current draw 30 mA @ 230 VSafety rating CAT III 690V/CAT IV 600VIP rating P64SpecificationsPower requirement 2-AA batteriesNet weight 280 gSize (length, width, height 26 x 7 x 3.8 cm

242,27 € (201,89 €)

Verfügbar - 3-5 Werktage Lieferzeit

Fluke t5-1000 elektrisk tester

The Fluke T5 Electrical Testers let you check voltage, continuity and current with one compact tool. With the T5, all you have to do is select volts, ohms, or current and the tester does the rest. OpenJawTM current lets you check current up to 100A - without breaking the circuit. Its tough test leads stow neatly in the back of the tester, making it easy to tote the T5 in your tool pouch. Detachable SlimReachTM test probes are customized for national electrical standards. The test leads accept optional accessories such as clips and specialty probes. The optional H5 holster lets you clip the T5 onto your belt. Available in 600V and 1000V models.1000V Voltage, Continuity and Current TesterAll models include:4 mm detachable probesInstruction sheet

315,49 € (262,91 €)

Verfügbar - 3-5 Werktage Lieferzeit

Fluke tl224 suregrip testledning

Test leads are an integral part of the complete measurement system and extend the capabilities of your digital multimeter. The TL224 SureGripTM Insulated Test leads offer reinforced strain relief and includes banana jack termination for a variety of test lead configurations. SureGripTM accessories are designed to improve steadiness in slippery hands. Rubber over molded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement.DMM test leads (red, black) with safety shrouded, standard diameter banana plugsRight angle connector on one end and straight connector on the otherReinforced strain relief1.5 meter silicone-insulated wire resists heat & coldCAT IV 600 V, CAT III 1000 V, 10 A rating. UL listed

60,46 € (50,38 €)

Verfügbar - 3-5 Werktage Lieferzeit

Habotest HT820 Industrial Infrared Thermal Imaging Camera

The Habotest HT820 industrial infrared thermal imaging camera turns your smartphone into a precise diagnostic tool. With a 256×192 pixel sensor, 25 Hz frame rate, and temperature range from -15°C to 600°C, it provides detailed real-time thermal imaging. Features include high/low temperature tracking, point, line, and area measurement, threshold alarms, and six color palettes. Compact and durable (IP54, 17 g), it connects via USB-C to Android devices. The dedicated app allows recording, analysis, annotations, and customized alerts. Ideal for industry, construction, automotive diagnostics, and technical inspections.

232,01 € (193,34 €)

Bestellware. 7-9 Tage Lieferzeit

Fluke tl71-1 test lead set -eur

Testleitungen sind ein integraler Bestandteil des vollständigen Messsystems und erweitern die Fähigkeiten Ihres digitalen Multimeters. Das Fluke TL71 Premium Test Lead Set verfügt über ein Paar rote und schwarze Komfortgriffsonden mit flexiblen, silikonisolierten, rechtwinkligen Testleitungen. Mit charakteristischen Komfortgriffsonden sind sie hitze- und kältebeständig mit Sicherheitsbewertungen bis CAT III 1000 V.

54,42 € (45,35 €)

Verfügbar - 3-5 Werktage Lieferzeit

Fluke tpak toolpak meterophængssæt

The Fluke TPAK ToolPakTM Magnetic Meter Hanger allows you to hang your meter on nails, hooks and many other objects so you can take your measurements hands-free. The kit includes powerful magnetic hanger, 9 inch hook and loop strap, a hook hanger and a general purpose hanger. Solves any hanging and positioning problem you may face. Attaches to most Fluke meters.Fluke TPAK ToolPakTM Magnetic Meter Hanger Kit includes:9 inch hook and loop strapUniversal hanger clipHook hanger for non magnetic surfacesStrong magnet

80,16 € (66,80 €)

Verfügbar - 3-5 Werktage Lieferzeit

Fluke 1ac-e1-ii spændingsviser voltalert

The pocket-sized voltage detectorThe next generation VoltAlertTM AC non-contact voltage testers from Fluke are easy to use — just touch the tip to a terminal strip, outlet, or supply cord. When the tip glows red and the unit beeps, you know there’s voltage present. Electricians, maintenance, service, safety personnel, and homeowners can quickly test for energized circuits in the workplace or at home.Fluke 1AC-E1-IIRound TipCAT IV 1000 V for added protection200 V to 1000 V AC

51,82 € (43,18 €)

Verfügbar - 3-5 Werktage Lieferzeit

Elma Instruments MagnetStick® - multi-language packaging

MagnetStick® - multi-language packaging Produkt beskrivelse: Magnet Stick er et smart lille Pen-instrument for nem test af magnetisme uden metallisk k...

24,94 € (20,78 €)

Verfügbar - 3-5 Werktage Lieferzeit

Elma Instruments Elma 708 - mini thermometer

Elma 708 - Mini penetration thermometer . Measuring from +50...250degrees.

62,90 € (52,42 €)

Verfügbar - 3-5 Werktage Lieferzeit

Elma Instruments Battery 3.6v er14505 aa

Wiederaufladbarer Lithium-Akku 3,6V ER14505 AA

28,50 € (23,75 €)

Verfügbar - 3-5 Werktage Lieferzeit

Elma Instruments Battery - 3.6v lithium 1/2 aa

5,7064451109e+12

18,59 € (15,49 €)

Verfügbar - 3-5 Werktage Lieferzeit

Elma Instruments Elma rt606a - phase rotation tester iec 61010-1 cat iii

Elma RT606A is a handy electronic phase sequence tester that, with powerful LEDs show rotary direction and indicate the individual phases. The instrument meets IEC 61010-1 CAT III 300V and comes with safety test leads, 3 insulated alligator clips and 3 test sticks. Technical data: Working Voltage: 150-500V Frequency: 50/60Hz Measuring current: <3.5 mA Dimensions: 130 x 72 x 30 mm Weight: 190 g

111,08 € (92,57 €)

Verfügbar - 3-5 Werktage Lieferzeit

Elma Instruments Safety banana plug - 1076 red

Type 1076 is a multi-blade 4 mm banana plug for stacking and with fixed protection hood. The wire is clamped with an Allen key. Technical data: IEC 61010: Cat III 1000V, Cat IV 600V

14,10 € (11,75 €)

Verfügbar - 3-5 Werktage Lieferzeit

Yato YT-73080 multimeter

Yato YT-73080 Multimeter Digitales Multimeter

10,20 € (8,50 €)

Bestellware. 8-10 Tage Lieferzeit

Montag - Freitag:	09:00 - 15:00 Uhr
Samstag, Sonntag & dänischen Feiertagen:	Geschlossen