Haus und Garten » Schraub & Bohrmaschinen

Makita B-57990 Nemesis Hammer Drill

Bohrer, für Beton, Mauerwerk, Stein, Stahlbeton, Ziegelsteine, Beton mit Stahlamierung, Hammereinsatz, 6 mm, SDS-plus, Länge: 265 mm, für XGT HR008GM202

10,34 € (8,62 €)

Verfügbar - 5-7 Werktage Lieferzeit

Bosch Impact Control Screwdriver Bits Set PZ1-PZ2-PZ3 25 mm

3 x Bosch professional screwdriver bit PZ insert bit – PZ1, PZ2, PZ3, length 25 mm, hex shank

4,91 € (4,09 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch Extra Hard Screwdriver Bit Pz 4 32mm 25 pcs.

Bosch Schrauberbit extra-hart

21,78 € (18,15 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch METALBOR POINTTEC HSS-R 8.7MM 10 STK

Bosch HSS Twist Drill Bits PointTeQ

21,28 € (17,73 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch Expert SDS-plus-7X

Bohrer, für Beton, Stahlbeton, Granit, Festbeton, Gneis, Hammereinsatz, 25 mm, SDS-plus, Länge: 450 mm

66,12 € (55,10 €)

Verfügbar - 6-8 Werktage Lieferzeit

Irwin ir cordless 14.0x160x100

Multifunktions-Bohrer zum Bohren von Metall, Holz, Stein und mehr 14.0x160x10

12,94 € (10,78 €)

Bestellware. 7-9 Tage Lieferzeit

Wiha slimbit electric bit

Schraubendreher-Bit, torx, T20, Länge: 75 mm

7,69 € (6,41 €)

Verfügbar - 3-5 Werktage Lieferzeit

Milwaukee Vinkelforsats 10 Shockwave m/10bits PH/PZ/TX

Milwaukee 4932471274 manual screwdriver Set

27,56 € (22,97 €)

Bestellware. 7-9 Tage Lieferzeit

Bosch HAMMERBOR SDS-P P3 24X400/450MM

The SDS plus-3 drill bit has long durability when drilling in reinforced concrete. The Dura design with four grooves ensures increased durability with effective dust removal and reduced heat development. The drill bit is made of high-alloy steel with optimized hardening technology, which increases wear resistance. The serrated cutting edges are made of an extra robust carbide material developed and produced by Bosch. The drill bit is PGM certified by the PGM Masonry Drill Bit Association Board and guarantees tight tolerances, precise drilling, and efficient fastening. The drill bit is intended for drilling in concrete and masonry together with SDS plus holders for rotary hammers.
Package contains 1 piece.

28,61 € (23,84 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch HAMMERBOR SDS-P P3 13X100/160MM

The SDS plus-3 drill bit has long durability when drilling in reinforced concrete. The Dura design with four grooves ensures increased durability with effective dust removal and reduced heat development. The drill bit is made of high-alloy steel with optimized hardening technology, which increases wear resistance. The serrated cutting edges are made of an extra robust carbide material developed and produced by Bosch. The drill bit is PGM certified by the PGM Masonry Drill Bit Association Board and guarantees tight tolerances, precise drilling, and efficient fastening. The drill bit is intended for drilling in concrete and masonry together with SDS plus holders for rotary hammers.
Package contains 1 piece.

7,01 € (5,84 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch HAMMERBOR SDS-P P3 12X100/160MM

The SDS plus-3 drill bit has long durability when drilling in reinforced concrete. The Dura design with four grooves ensures increased durability with effective dust removal and reduced heat development. The drill bit is made of high-alloy steel with optimized hardening technology, which increases wear resistance. The serrated cutting edges are made of an extra robust carbide material developed and produced by Bosch. The drill bit is PGM certified by the PGM Masonry Drill Bit Association Board and guarantees tight tolerances, precise drilling, and efficient fastening. The drill bit is intended for drilling in concrete and masonry together with SDS plus holders for rotary hammers.
Package contains 1 piece.

7,80 € (6,50 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch HAMMERBOR SDS-P P3 8X400/460MM

The SDS plus-3 drill bit has long durability when drilling in reinforced concrete. The Dura design with four grooves ensures increased durability with effective dust removal and reduced heat development. The drill bit is made of high-alloy steel with optimized hardening technology, which increases wear resistance. The serrated cutting edges are made of an extra robust carbide material developed and produced by Bosch. The drill bit is PGM certified by the PGM Masonry Drill Bit Association Board and guarantees tight tolerances, precise drilling, and efficient fastening. The drill bit is intended for drilling in concrete and masonry together with SDS plus holders.
Package of 1 piece.

11,75 € (9,79 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch HAMMERBOR SDS-P P3 10X150/210MM

The SDS plus-3 drill bit has long durability when drilling in reinforced concrete. The Dura design with four grooves ensures increased durability with effective dust removal and reduced heat development. The drill bit is made of high-alloy steel with optimized hardening technology, which increases wear resistance. The serrated cutting edges are made of an extra robust carbide material developed and produced by Bosch. The drill bit is PGM certified by the PGM Masonry Drill Bit Association Board and guarantees tight tolerances, precise drilling, and efficient fastening. The drill bit is intended for drilling in concrete and masonry together with SDS plus holders.
Package of 1 piece.

6,20 € (5,17 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch HAMMERBOR SDS-P P3 20X250/300MM

The SDS plus-3 drill bit has long durability when drilling in reinforced concrete. The Dura design with four grooves ensures increased durability with effective dust removal and reduced heat development. The drill bit is made of high-alloy steel with optimized hardening technology, which increases wear resistance. The serrated cutting edges are made of an extra robust carbide material developed and produced by Bosch. The drill bit is PGM certified by the PGM Masonry Drill Bit Association Board and guarantees tight tolerances, precise drilling, and efficient fastening. The drill bit is intended for drilling in concrete and masonry together with SDS plus holders for rotary hammers.
Package contains 1 piece.

16,40 € (13,67 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch FORSTNERBOR HM 34MM

This hinge cutter bit is equipped with a cylindrical shaft system and is intended for portable screwdrivers and drill stands. The carbide hinge cutter bit ensures precise results in abrasive materials. The bit's special properties make it the preferred tool of machine carpenters and carpenters, especially in the production of windows, doors, and kitchens. The bit, which is made with carbide cutters with diamond-ground tungsten achieves impressive results. In addition, the centering point guarantees a perfect start to drilling, and the two primary and two secondary side cutters effortlessly cut through materials to achieve extremely precise and splinter-free bottom hole diameters. The bit is particularly suitable for abrasive materials on hard wood, plywood, chipboard, and fiberboard.
Package with 1 piece.

42,01 € (35,01 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch FORSTNERBOR HM 15MM

This hinge cutter bit is equipped with a cylindrical shaft system and is intended for portable screwdrivers and drill stands. The carbide hinge cutter bit ensures precise results in abrasive materials. The bit's special properties make it the preferred tool of machine carpenters and carpenters, especially in the production of windows, doors, and kitchens. The bit, which is made with carbide cutters with diamond-ground tungsten achieves impressive results. In addition, the centering point guarantees a perfect start to drilling, and the two primary and two secondary side cutters effortlessly cut through materials to achieve extremely precise and splinter-free bottom hole diameters. The bit is particularly suitable for abrasive materials on hard wood, plywood, chipboard, and fiberboard.
Package with 1 piece.

22,03 € (18,36 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch DIAMANTHULSAV 70MM DRYSPEED

200,14 € (166,78 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch FLADBOR JUSTERBART 15-45MM

The flat drill is made of hardened steel with a centering point for precise drilling. The adjustable flat drill ensures high flexibility when drilling. The flat drill has a wedge-shaped blade with a screw for locking and feeding, which can be adjusted from 15-45 mm. The flat drill is ideally suited for general drilling tasks where larger holes of different diameters are required. The drill is suitable for medium-hard and soft wood as well as lighter building materials and wood panels.
Adjustable flat milling cutter, Ø 15 - 25 mm, Ø 25 - 45 mm

37,22 € (31,02 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch SPIRALBOR 14X95X150MM TRÆBOR

Bohrer, für Weichholz, Hartholz, Brad-Point-Bohrer, 14 mm, zylindrisch, Länge: 151 mm

5,99 € (4,99 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch HAMMERBOR SDS-P P3 6X50/110MM

The SDS plus-3 drill bit has long durability when drilling in reinforced concrete. The Dura design with four grooves ensures increased durability with effective dust removal and reduced heat development. The drill bit is made of high-alloy steel with optimized hardening technology, which increases wear resistance. The serrated cutting edges are made of an extra robust carbide material developed and produced by Bosch. The drill bit is PGM certified by the PGM Masonry Drill Bit Association Board and guarantees tight tolerances, precise drilling, and efficient fastening. The drill bit is intended for drilling in concrete and masonry together with SDS plus holders for rotary hammers.
Package contains 1 piece.

3,72 € (3,10 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch BETONBOR SILVER SLAGBOR 10X300MM

The CYL-3 drill bit ensures long-lasting performance when drilling in concrete. The wear-resistant drill bit is made of a special carbide material developed and produced by Bosch. The material is designed to withstand frequent use and provides extra durability for tasks in concrete. The drill bit's efficient U-shape with 2 flutes ensures effective dust removal, less friction, reduced heat development and wear, and extends the life of the drill bit. The drill bit provides long-lasting performance when drilling fastening holes in abrasive materials such as concrete and natural stone. The drill bit is PGM-certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, precise drilling, and efficient fastening. The drill bit is compatible with the cylindrical shank system for all powered and battery-powered hammer drills.
Package with 1 piece.

11,33 € (9,44 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch TRÆSPIRALBOR CV 30 X 220MM

The drill bit is equipped with a cylindrical shaft system. The dowel drill bit ensures precise drilling in both soft and hard wood and can be used for both through holes and pocket holes. The extremely sharp drill head with centering point makes it possible to place the hole precisely. High-quality support cutters with precise edges produce splinter-free holes. The two flutes of the bit prevent material from clogging the hole and ensure good material removal and a precise result. The drill bit can be used for drilling in both soft and hard wood.
Package of 1 piece.

33,83 € (28,19 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch TRÆSPIRALBOR CV 20 X 200MM

Drill bit, for softwood, hardwood, brad point bit, 20 mm, cylindrical, length: 200 mm

16,48 € (13,73 €)

Verfügbar - 5-7 Werktage Lieferzeit

Bosch METALBOR HSS-G DIN 340 9X115MM

The long ground HSS spiral drill bit for drilling deep holes through metal with maximum precision. Its length allows for deep drilling with this long drill head. The exposed 135-degree two-part self-centering tip of the drill head combines active cutting with perfect centering without displacement for maximum precision. With the two-part tip, it is also unnecessary to mark pilot holes in advance or pilot bore up to 10 mm. This precision-ground drill head, made of HSS (high-speed steel), provides up to 40% faster drilling and up to 50% lower clamping pressure than standard ground HSS cutting edge drill heads. The long ground HSS spiral drill bit is manufactured according to DIN 340. The drill head is of type N (not angle) with a 135-degree tip and a diameter tolerance of h8. This drill head is designed for drilling deep holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, reduced cast iron, non-ferrous metals and hard plastic. It has a cylindrical shaft system (the shaft has the same diameter as the drill head) and is intended for use in drilling stands and screwdrivers
Package contains one piece.

12,94 € (10,78 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch METALBOR HSS-CO S 11X142MM 5STK

The HSS cobalt spiral drill provides long-lasting performance when drilling in stainless steel. The extended lifespan is due to a 5% cobalt alloy content and fully ground HSS (high-speed steel), which provides outstanding surface quality, wear resistance, and heat protection. Equipped with two cutting edges and two flutes, chips are removed quickly so the hammer drill lasts even longer. This hammer drill can be used for alloyed and unalloyed steel, stainless steel, cast iron, cast steel, acid- and heat-resistant steel. The HSS spiral drill made of steel is manufactured according to DIN 338. The drilling head is of type N (notch angle) with a 135-degree point angle and a diameter tolerance of h8. Active cutting and perfect centering without displacement are achieved thanks to the two-part tip. This drilling head can be used for alloyed and unalloyed steel, stainless steel, cast iron, cast steel as well as acid- and heat-resistant steels. It has a cylindrical shaft system (the shaft has the same diameter as the drilling head) intended for use in boring stands or screwdrivers.
Package with 5 pieces.

48,84 € (40,70 €)

Verfügbar - 6-8 Werktage Lieferzeit

Montag - Freitag:	09:00 - 15:00 Uhr
Samstag, Sonntag & dänischen Feiertagen:	Geschlossen

Haus und Garten Schraub & Bohrmaschinen - Seite 69

Makita B-57990 Nemesis Hammer Drill

Bosch Impact Control Screwdriver Bits Set PZ1-PZ2-PZ3 25 mm

Bosch Extra Hard Screwdriver Bit Pz 4 32mm 25 pcs.

Bosch METALBOR POINTTEC HSS-R 8.7MM 10 STK

Bosch Expert SDS-plus-7X

Irwin ir cordless 14.0x160x100

Wiha slimbit electric bit

Milwaukee Vinkelforsats 10 Shockwave m/10bits PH/PZ/TX

Bosch HAMMERBOR SDS-P P3 24X400/450MM

Bosch HAMMERBOR SDS-P P3 13X100/160MM

Bosch HAMMERBOR SDS-P P3 12X100/160MM

Bosch HAMMERBOR SDS-P P3 8X400/460MM

Bosch HAMMERBOR SDS-P P3 10X150/210MM

Bosch HAMMERBOR SDS-P P3 20X250/300MM

Bosch FORSTNERBOR HM 34MM

Bosch FORSTNERBOR HM 15MM

Bosch DIAMANTHULSAV 70MM DRYSPEED

Bosch FLADBOR JUSTERBART 15-45MM

Bosch SPIRALBOR 14X95X150MM TRÆBOR

Bosch HAMMERBOR SDS-P P3 6X50/110MM

Bosch BETONBOR SILVER SLAGBOR 10X300MM

Bosch TRÆSPIRALBOR CV 30 X 220MM

Bosch TRÆSPIRALBOR CV 20 X 200MM

Bosch METALBOR HSS-G DIN 340 9X115MM

Bosch METALBOR HSS-CO S 11X142MM 5STK