Haus und Garten » Schraub & Bohrmaschinen

Bosch DIAMANTBOR TØR 65X150MM 1/2PROF

61,06 € (50,88 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch FORSTNERBOR HM 25MM

This hinge cutter bit is equipped with a cylindrical shaft system and is intended for portable screwdrivers and drill stands. The carbide hinge cutter bit ensures precise results in abrasive materials. The bit's special properties make it the preferred tool of machine carpenters and carpenters, especially in the production of windows, doors, and kitchens. The bit, which is made with carbide cutters with diamond-ground tungsten achieves impressive results. In addition, the centering point guarantees a perfect start to drilling, and the two primary and two secondary side cutters effortlessly cut through materials to achieve extremely precise and splinter-free bottom hole diameters. The bit is particularly suitable for abrasive materials on hard wood, plywood, chipboard, and fiberboard.
Package with 1 piece.

28,94 € (24,12 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch FORSTNERBOR HM 22MM

Denne hængselskærerbit er forsynet med et cylinderformet skaftsystem og er beregnet til bærbare skruemaskiner og borestandere. Hængselskærerbitten af karbid sikrer præcise resultater i abrasive materialer. Bittens særlige egenskaber gør den til det maskinsnedkerens og tømrerens foretrukne værktøj, især inden for produktion af vinder, døre og køkkener. Bitten, der er fremstillet med skær af karbid med diamantslebet wolfram, opnår imponerende resultater. Derudover er centreringsspidsen garant for en perfekt start på boringen, og de to primære og de to sekundære sideskær skærer ubesværet gennem materialer og opnår dermed ekstremt præcise og splintfri bundhulsdiametre. Bitten er særligt velegnet til abrasive materialer på hårdt træ, krydsfiner, spånplader og træfiberplader.
Pakke med 1 stk.

31,06 € (25,88 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch HAMMERBOR SDS P-5 6.5X485X550MM

The SDS plus-5 drill bit ensures problem-free drilling. The grooved carbide tip with notches ensures smooth drilling and easily penetrates the material without getting stuck, even in concrete. The Activeteq centering tip guides the drill position from the start without shaking or displacement and ensures precise hole diameter. AWB soldering and hardening technology reduces vibration during drilling, so the user is not burdened. The drill bit is suitable for masonry and concrete. The visible wear indicator shows if the hole diameter is still within tolerance when inserting dowels. The drill head is PGM certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, accurate drilling, and efficient fastening. The drill head is made in Germany. Compatible with SDS plus holder rotary hammers.
Package of 1 piece.

33,50 € (27,92 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch BETONBOR CYL5 10X250MM

The CYL-5 drill bit head guarantees extra long lifespan when drilling in concrete and stone. The carbide material developed by Bosch, combined with diamond-ground cutting edges, provides an extremely durable drill bit head. The variable design with 2 flutes and a short, variable pitch significantly reduces flute friction and ensures effective dust removal and less wear. The Bosch Power Grip shank system enables 100% power transfer from the machine to the drill bit head. This means that the power is optimally utilized directly for drilling tasks, and reduced power loss results in less wear. For drilling fixing holes in concrete, natural stone, and artificial stone materials. The drill bit head is PGM certified by the PGM Masonry Drill Bit Association Board which guarantees tight tolerances, accurate boreholes, and efficient fastening. The drill bit head is compatible with cylindrical shank systems for all powered or battery-powered hammer drills.
Package of 1 piece.

11,60 € (9,67 €)

Bestellware. 7-9 Tage Lieferzeit

Bosch HAMMERBOR SDS P-5 18X600MM

Drill bit, for concrete, masonry, hammer bit, 18 mm, SDS-plus, length: 600 mm

41,26 € (34,38 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch METALBOR HSS-CO S 10X133MM 5 STK

Bohrer, Spiralbohrer, 10 mm, zylindrisch, Länge: 133 mm (Packung mit 5)

37,21 € (31,01 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch HAMMERBOR SDS P-5 7X465MM

The SDS plus-5 drill bit ensures problem-free drilling. The grooved carbide tip with notches ensures smooth drilling and easily penetrates the material without getting stuck, even in concrete. The Activeteq centering tip guides the drill position from the start without shaking or displacement and ensures precise hole diameter. AWB soldering and hardening technology reduces vibration during drilling work, so the user is not burdened. The drill bit is suitable for masonry and concrete. The visible wear indicator shows if the hole diameter is still within tolerance when inserting dowels. The drill head is PGM certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, accurate drilling, and efficient fastening. The drill head is made in Germany. Compatible with SDS plus holder rotary hammers.
Package of 1 piece.

22,37 € (18,64 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch SNEGLEBOR SW11 22X360X450MM

The drill bit has a hexagonal shaft system and is compatible with all screwdrivers with a 13 mm chuck. The spiral drill bit is suitable for quick and precise drilling when drilling through holes, pre-drilling for rafter nails, and drilling deep dowel holes in wood. The powerful self-feeding tip pulls the bit all the way through, ensuring fast and precise drilling with low power consumption. The optimized low-friction geometry of the bit with solid core ensures straight holes, high chip removal, and higher working speed. The optimized guide edge of the bit and precision-ground head cutting edge produce precise holes. Suitable for use in construction trades, by carpenters and roofers, it is suitable for both softwood and hardwood
Total length 450 mm

36,46 € (30,38 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch METALBOR HSS-G S 13.0X151MM 5STK

Bohrer, Spiralbohrer, 13 mm, zylindrisch, Länge: 151 mm (Packung mit 5)

44,38 € (36,98 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch METALBOR HSS-CO S 5.1X86MM 10STK

25,49 € (21,24 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch FLISEBOR EXPERT 16X90MM

Der CYL-9 Keramikfliesenbohrkopf ist ein Standard-Bohrkopf zum Bohren in Fliesen. Der praktische Bohrkopf eignet sich für Trockenbohrungen ohne Kühlung. Das einfache Design ohne Kerben ist besonders geeignet für das Bohren in weichen bis mittelharten Fliesen. Bohren ohne Schlagfunktion bei niedrigen Geschwindigkeiten. Der Bohrkopf ist kompatibel mit Strom- und Akkubohrmaschinen mit zylindrischem Schaftsystem. Paket von 1 Stück.

10,42 € (8,68 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch METALBOR HSS-G 9X175MM 5 STK

The long ground HSS spiral drill bit for drilling deep holes through metal with maximum precision. Its length allows for deep drilling with this long drill head. The exposed 135-degree two-part self-centering tip of the drill head combines active cutting with perfect centering without displacement for maximum precision. With the two-part tip, it is also unnecessary to mark pilot holes in advance or pilot bore up to 10 mm. This precision-ground drill head, made of HSS (high-speed steel), provides up to 40% faster drilling and up to 50% lower clamping pressure than standard ground HSS cutting edge drill heads. The long ground HSS spiral drill bit is manufactured according to DIN 340. The type N (notch angle) of the drill head has a 135-degree tip and a diameter tolerance of h8. This drill head is designed for drilling deep holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, reduced cast iron, non-ferrous metals and hard plastic. It has a cylindrical shaft system (the shaft has the same diameter as the drill head) and is intended for use in boring stands and screwdrivers
Package of 5 pieces.

36,70 € (30,58 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch FLISEBOR EXPERT 5.5X70MM

Der CYL-9 Keramikfliesenbohrkopf ist ein Standard-Bohrkopf zum Bohren in Fliesen. Der praktische Bohrkopf eignet sich für trockenes Bohren ohne Kühlung. Das einfache Design ohne Kerben ist besonders geeignet für das Bohren in weichen bis mittelharten Fliesen. Ohne Schlagfunktion bei niedrigen Geschwindigkeiten bohren. Der Bohrkopf ist kompatibel mit Strom- und batteriebetriebenen Bohrmaschinen mit zylindrischem Schaftsystem. Paket von 1 Stück.

6,48 € (5,40 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch METALBOR POINTTEC HSS-R 11.7MM 5STK

The HSS spiral drill with PointTeQ allows for fast drilling in metal thanks to the design of the tip with PointTeQ. It is quick and easy to start drilling as the self-centering tip prevents wandering. Due to the increased drilling speed, less heat and wear are generated. The PointTeQ tip design ensures that it remains sharp and has a long lifespan. This drill is suitable for drilling in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron, and plastic. There is low risk of breakage, especially for drills with a diameter under 6 mm as they are made with an extremely flexible core. Its black oxide coating ensures quick chip removal. The HSS PointTeQ spiral drill is manufactured according to DIN 338 standards. The drill type is N (angle of flute) with a 135-degree point angle. It has a cylindrical shank system (the shank has the same diameter as hammer drills) and is intended for use in pillar drills or screwdrivers.
Pack of 5 pieces.

22,62 € (18,85 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch METALBOR HSS-CO S 4.8X86MM

The HSS cobalt spiral drill provides long-lasting performance when drilling in stainless steel. The extended lifespan is due to a 5% cobalt alloy content and fully ground HSS (high-speed steel), which provides outstanding surface quality, wear resistance, and heat protection. Equipped with two cutting edges and two flutes, chips are removed quickly, so the hammer drill lasts even longer. This hammer drill can be used for alloyed and unalloyed steel, stainless steel, cast iron, cast steel, acid- and heat-resistant steel. The HSS spiral drill made of steel is manufactured according to DIN 338. The drilling head is of type N (notch angle) with a 135-degree point angle and a diameter tolerance of h8. Active cutting and perfect centering without displacement are achieved thanks to the two-part tip. This drilling head can be used for alloyed and unalloyed steel, stainless steel, cast iron, cast steel as well as acid- and heat-resistant steels. It has a cylindrical shaft system (the shaft has the same diameter as the drilling head) intended for use in boring stands or screwdrivers.
Package with one piece.

2,05 €

Aktion abgelaufen

4,19 € (3,49 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch METALBOR HSS-G 9.2X125MM 5 STK

The ground HSS spiral drill bit for drilling through metal with maximum precision. The exposed 135-degree split self-centering point of the drill head combines active cutting with perfect centering without displacement for maximum precision. With the split tip, it is also unnecessary to mark center points in advance or pilot drill up to 10 mm. This precision-ground drill head, made of HSS (high-speed steel), provides up to 40% faster drilling and up to 50% lower clamping pressure than standard ground HSS cutting edge drill heads. This drill head is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, reduced cast iron, non-ferrous metals and hard plastic. The ground HSS spiral drill bit is manufactured according to DIN 338. The type N (notch angle) of the borehead has a 135-degree point and a diameter tolerance of h8. It has a cylindrical shaft system (the shaft has the same diameter as the borehead) and is intended for use in drilling stands and screwdrivers.
Package with five pieces.

22,79 € (18,99 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch METALBOR POINTTEC HSS-R 1.6MM 10STK

7,19 € (5,99 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch METALBOR HSS-CO S 3.3X65MM 10STK

15,97 € (13,31 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch METALBOR HSS-CO S 3X61MM 10STK

Bohrer, Spiralbohrer, 3 mm, zylindrisch, Länge: 61 mm (Packung mit 10)

14,78 € (12,32 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch METALBOR HSS-CO S 2.5X57MM 10STK

The HSS cobalt spiral drill provides long-lasting performance when drilling in stainless steel. The extended lifespan is due to a 5% cobalt alloy content and fully ground HSS (high-speed steel), which provides outstanding surface quality, wear resistance, and heat protection. Equipped with two cutting edges and two flutes, chips are removed quickly so the hammer drill lasts even longer. This hammer drill can be used for alloyed and unalloyed steel, stainless steel, cast iron, cast steel, acid- and heat-resistant steel. The HSS spiral drill made of steel is manufactured according to DIN 338. The drilling head is of type N (notch angle) with a 135-degree point angle and a diameter tolerance of h8. Active cutting and perfect centering without displacement are achieved thanks to the two-part tip. This drilling head can be used for alloyed and unalloyed steel, stainless steel, cast iron, cast steel as well as acid- and heat-resistant steels. It has a cylindrical shaft system (the shaft has the same diameter as the drilling head) intended for use in boring stands or screwdrivers.
Package of 10 pieces.

13,61 € (11,34 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch SPIRALBOR SEKSKANTSKAFT 28X470X600MM

The drill bit has a hexagonal shaft system and is compatible with all screwdrivers with a 13 mm chuck. The spiral drill bit is suitable for quick and precise drilling when drilling through holes, pre-drilling for rafter nails, and drilling deep dowel holes in wood. The powerful self-feeding tip pulls the bit all the way through, ensuring fast and precise drilling with low power consumption. The optimized low-friction geometry of the bit with solid core ensures straight holes, high chip removal, and higher working speed. The optimized guide edge of the bit and precision-ground head cutting edge produce precise holes. Suitable for use in construction trades, by carpenters and roofers, it is suitable for both softwood and hardwood
Total length 600 mm

73,36 € (61,13 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch METALBOR HSS-CO S 6X93MM 10STK

Bohrer, Spiralbohrer, 10 Stück, 6 mm, H8, zylindrisch, Länge: 93 mm

27,94 € (23,28 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch SPIRALBOR 20X100X160MM SEKSKANTSKAFT

16,90 € (14,08 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch METALBOR HSS-CO S 5.5X93MM 10STK

The HSS cobalt spiral drill provides long-lasting performance when drilling in stainless steel. The extended lifespan is due to a 5% cobalt alloy content and fully ground HSS (high-speed steel), which provides outstanding surface quality, wear resistance, and heat protection. Equipped with two cutting edges and two flutes, chips are removed quickly so the hammer drill lasts even longer. This hammer drill can be used for alloyed and unalloyed steel, stainless steel, cast iron, cast steel, acid- and heat-resistant steel. The HSS spiral drill made of steel is manufactured according to DIN 338. The drilling head is of type N (notch angle) with a 135-degree point angle and a diameter tolerance of h8. Active cutting and perfect centering without displacement are achieved thanks to the two-part tip. This drilling head can be used for alloyed and unalloyed steel, stainless steel, cast iron, cast steel as well as acid- and heat-resistant steels. It has a cylindrical shaft system (the shaft has the same diameter as the drilling head) intended for use in boring stands or screwdrivers.
Package of 10 pieces.

25,49 € (21,24 €)

Verfügbar - 6-8 Werktage Lieferzeit

Montag - Freitag:	09:00 - 15:00 Uhr
Samstag, Sonntag & dänischen Feiertagen:	Geschlossen

Haus und Garten Schraub & Bohrmaschinen - Seite 64

Bosch DIAMANTBOR TØR 65X150MM 1/2PROF

Bosch FORSTNERBOR HM 25MM

Bosch FORSTNERBOR HM 22MM

Bosch HAMMERBOR SDS P-5 6.5X485X550MM

Bosch BETONBOR CYL5 10X250MM

Bosch HAMMERBOR SDS P-5 18X600MM

Bosch METALBOR HSS-CO S 10X133MM 5 STK

Bosch HAMMERBOR SDS P-5 7X465MM

Bosch SNEGLEBOR SW11 22X360X450MM

Bosch METALBOR HSS-G S 13.0X151MM 5STK

Bosch METALBOR HSS-CO S 5.1X86MM 10STK

Bosch FLISEBOR EXPERT 16X90MM

Bosch METALBOR HSS-G 9X175MM 5 STK

Bosch FLISEBOR EXPERT 5.5X70MM

Bosch METALBOR POINTTEC HSS-R 11.7MM 5STK

Bosch METALBOR HSS-CO S 4.8X86MM

Bosch METALBOR HSS-G 9.2X125MM 5 STK

Bosch METALBOR POINTTEC HSS-R 1.6MM 10STK

Bosch METALBOR HSS-CO S 3.3X65MM 10STK

Bosch METALBOR HSS-CO S 3X61MM 10STK

Bosch METALBOR HSS-CO S 2.5X57MM 10STK

Bosch SPIRALBOR SEKSKANTSKAFT 28X470X600MM

Bosch METALBOR HSS-CO S 6X93MM 10STK

Bosch SPIRALBOR 20X100X160MM SEKSKANTSKAFT

Bosch METALBOR HSS-CO S 5.5X93MM 10STK