Handys - Schutzfolie - Seite 156

Wozinsky Privacy Glass is a combination of screen protection and privacy control when you use your phone every day. The built-in anti-spy filter limits the viewing angle of the display, so that the content remains legible only for the user looking straight ahead. The 9H hardness supports protecting the screen from scratches and bumps. The glass maintains clarity and touch sensitivity, ensuring comfort of use. Set of 2 pcs. It gives you a supply and increases the convenience of use.

Tech-Protect Glass Fit+ tempered glass is a high-quality protective accessory made of lightweight and precisely milled glass, only 0.3mm thick.

The perfectly fitted design fully preserves the touchscreen's sensitivity. The manufacturer rates its hardness at 9H on a 10-point scale, which translates into exceptional scratch resistance during everyday use.

The glass is crystal clear, preserving natural colors and display sharpness. An additional advantage is a special oleophobic coating that effectively minimizes the accumulation of fingerprints and other contaminants on the glass surface, making it easier to keep clean.

* The glass is compatible with most cases available on the market.
**Due to the varying milling patterns on display edges, a slight air halo may appear around the screen after installing a screen protector! This is a natural occurrence and depends on the milling pattern of the screen in a given unit.

INSTALLATION INSTRUCTIONS:
1) Start the installation in the bathroom right after taking a bath - the water vapor will absorb all the dust from the atmosphere and it will not interfere with the installation.
2) Thoroughly clean and degrease the screen surface, then polish it to a shine with a dry cloth.
3) Install the cover as evenly as you can - you can position it using two leaves, sticking them to the side of the device.
4) Eliminate any air bubbles by pressing firmly in circular motions for several dozen seconds. Do this to ensure the adhesive bonds as strongly as possible to the screen.

Wozinsky Privacy Glass combines screen protection with privacy controls for everyday use of the Samsung Galaxy S26 Ultra. The anti-spy filter limits the viewing angle of the display, so that the content is readable only for the user looking straight ahead. The 9H hardness supports protection against scratches and minor damage. The glass design is compatible with the in-screen fingerprint reader, which allows you to keep your phone unlocked conveniently. Set of 2 pcs. It increases the comfort of use and ensures a supply for the future.

Protect your foldable smartphone from all sides with the Wozinsky TPU full-body protective film. This flexible film is designed specifically for the Samsung Galaxy Z Flip 7 – it covers both the home screen, the outer screen and the back of the case. The high-quality TPU material provides great resistance to scratches, dirt and everyday wear and tear, without affecting the operation of the touch screen. The installation of the film is simple and does not require the use of glue. There are two sets in the package – perfect if you want to have a supply or share protection with a loved one.

Protect your iPhone 17 Pro Max for a long time – double now! The set includes two reliable Wozinsky Full Glue Tempered Glass with a hardness of 9H. They protect the screen from scratches, cracks and other mechanical damage. The full adhesive surface with a black frame guarantees a perfect fit and grip, and the high transparency ensures that the colors and touch sensitivity remain the same. In the package you will find accessories that facilitate trouble-free installation – without streaks, bubbles and frustration.

Tempered glass with a revolutionary installation method - if you have been terrified by this aspect of using tempered glass so far, your problems have just been solved!

The tempered glass from the "EZ Fit" series from Spigen has been secured with a mounting frame perfectly cut to the front of the phone, thanks to which you can perfectly position it on the screen. The manufacturer has simplified the method of installation to such an extent that it is fully intuitive for every user.

Privacy Glass is a thin coating that has been hardened to 9H hardness during the production and tempering process. This makes it scratch-resistant even when in contact with sharp objects such as keys or knives.

The glass is covered with an oleophobic and hydrophobic layer that prevents fingerprints or other impurities from leaving on the screen. It is crystal clear and perfectly reflects the displayed colors. It also does not affect touch sensitivity and has exceptional smoothness, thanks to which running your finger across the screen becomes a pleasure.

Its additional function is to protect privacy - the glass blocks the light emitted by the display at a certain angle, thereby achieving an effect similar to that of ATMs.

The glass is designed specifically to protect the screen against scratches and minimizes the risk of screen damage in the event of an unexpected fall.

Tech-Protect Glass Fit+ tempered glass is a high-quality protective accessory made of lightweight and precisely milled glass with a thickness of only 0.3mm.

The perfectly matched design fully preserves the sensitivity of the touchscreen. The manufacturer rates its hardness level at 9H on a ten-point scale, which translates into exceptional scratch resistance during everyday use.

The glass is characterized by crystal clarity, thanks to which it retains the natural colors and sharpness of the display. An additional advantage is a special oleophobic coating, which effectively minimizes the accumulation of fingerprints and other impurities on the surface of the glass, thus making it easier to keep it clean.

* The glass is compatible with most cases available on the market.
** Due to the variety of milling of the edges of the displays, a slight halo of air may form around the screen after the film/protective glass is installed on the screen! This is a natural situation and depends on the milling of the screen in a given piece.

INSTALLATION INSTRUCTIONS:
1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine.
3) Install the coating as evenly as you can - you can position it with two sheets, gluing them to the side of the device.
4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

The case + glass from Ringke isa complex solution that will protect your watch from all threats. Slim and lightweight PC overlay designed to fit perfectly. Slim is a stylish way to diversify and protect your smartwatch screen.

High-quality tempered glass is the perfect way to protect the screen from scratches and impacts. It has a hardness of 9H, which allows for effective protection of the display, with high resistance of the glass itself to superficial scratches. It is also covered with an oleophobic layer, which reduces the degree of fingerprints leaving on the screen.

* The glass is cut only to the flat part with an emphasized structure, in accordance with and on the basis of a die cut prepared by the manufacturer of a given model.
** Due to the variety of milling, a slight halo of air may form around the screen after installing the protective glass on the screen. This is a natural situation and depends on the device itself.

INSTALLATION INSTRUCTIONS:
1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine.
3) Install the shell as evenly as you can - you can position it with the help of mounting tools.
4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

Spigen Optik Pro L-Series lens covers made of 9H tempered glass provide excellent protection against scratches and damage. Additionally, an oleophobic coating effectively repels fingerprints, ensuring clarity and aesthetic appeal.

Tech-Protect Quick Set+ tempered glass is a premium screen protector that combines durability, comfort and modern technology. Made of 9H hardness glass, it provides exceptional impact and scratch resistance. Thanks to the innovative mounting system with installation frame, the application of the glass is extremely fast, precise and trouble-free – without the risk of air bubbles and exposure to dust.

The crystal clear surface guarantees excellent image quality and an extremely smooth tactile experience. The special oleophobic coating effectively reduces the formation of fingerprints and facilitates the condensation of water on the surface of the glass.

Tech-Protect Quick Set+ is the perfect solution for all those who want maximum protection and comfort of using their smartphone.

* Due to the variety of milling of the edges of the displays, a slight halo of air may form around the screen after the film/protective glass is installed on the screen. This is a natural situation and depends on the screen itself.

INSTALLATION INSTRUCTIONS:
1. Start installation in the bathroom right after bathing – the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2. Thoroughly clean and degrease the surface of the screen, then use a dry cloth to polish it to a shine. Make sure there are no dust particles left.
3. Put the frame with the glass already mounted on your phone – it will ensure a precise fit and make application easier.
4. Pull the starter film to start the process of automatically sticking the glass on the screen.
5. Press the glass in the designated areas. Do this thoroughly so that the adhesive layer bonds well to the surface.
6. Remove the frame and remove any air bubbles - you can use the included squeegee to thoroughly squeeze any remaining air from under the surface of the glass.

Done! Enjoy a perfectly applied screen protector.

Tech-Protect Glass Fit+ tempered glass is a high-quality protective accessory made of lightweight and precisely milled glass with a thickness of only 0.3mm.

The perfectly matched design fully preserves the sensitivity of the touchscreen. The manufacturer rates its hardness level at 9H on a ten-point scale, which translates into exceptional scratch resistance during everyday use.

The glass is characterized by crystal clarity, thanks to which it retains the natural colors and sharpness of the display. An additional advantage is a special oleophobic coating, which effectively minimizes the accumulation of fingerprints and other impurities on the surface of the glass, thus making it easier to keep it clean.

* The glass is compatible with most cases available on the market.
** Due to the variety of milling of the edges of the displays, a slight halo of air may form around the screen after the film/protective glass is installed on the screen! This is a natural situation and depends on the milling of the screen in a given piece.

INSTALLATION INSTRUCTIONS:
1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine.
3) Install the coating as evenly as you can - you can position it with two sheets, gluing them to the side of the device.
4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

SBS Omniglass C Klare Bildschirmschutzfolie Universal 1 Stück(e)

SBS Omniglass Klare Bildschirmschutzfolie Universal 1 Stück(e)

Spigen Optik Pro XL EZ Fit Kameraobjektivschutz Apple 2 Stück(e)

Bildschirmschutz für Handy, Glas, klar, für Apple iPhone 17 Pro, 18 Pro

The Armorite tempered glass camera lens protector from ESR provides reliable protection for your device. The glass precisely covers the entire lens surface, providing effective protection against scratches, cracks, and other mechanical damage, ensuring your camera remains in pristine condition. The raised edge significantly reduces the risk of damage. The product offers military-grade protection, guaranteeing durability and reliability.