Tech-Protect Handys - Schutzfolie - Seite 8

Tech-Protect Glass Fit+ tempered glass is a high-quality protective accessory made of lightweight and precisely milled glass with a thickness of only 0.3mm.

The perfectly matched design fully preserves the sensitivity of the touchscreen. The manufacturer rates its hardness level at 9H on a ten-point scale, which translates into exceptional scratch resistance during everyday use.

The glass is characterized by crystal clarity, thanks to which it retains the natural colors and sharpness of the display. An additional advantage is a special oleophobic coating, which effectively minimizes the accumulation of fingerprints and other impurities on the surface of the glass, thus making it easier to keep it clean.

* Due to the various milling of the edges of the displays, after installing the film/protective glass on the screen, a slight air halo may be created around the screen! This is a natural situation and depends on the milling of the screen in a given piece.

INSTALLATION INSTRUCTIONS:
1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine.
3) Install the coating as evenly as you can - you can position it with two sheets, gluing them to the side of the device.
4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

Made of aluminum and glass, the camera lens caps from Tech-Protect Camring Fit+ are a very stylish way to protect this part of the device. The pads provide protection against scratches and breakage.

The set comes with a perfectly cut mounting frame, thanks to which you can position the glass perfectly. The manufacturer has simplified the installation method to such an extent that it is fully intuitive for every user.

Protect your smartphone's camera in a stylish and effective way with Tech-Protect Camfull Fit+. It is a high-quality cover made of durable aluminum and tempered glass, which protects the lenses from scratches, mechanical damage and dirt.

Thanks to the precise fit, the hood adheres perfectly to the camera module, without affecting the quality of photos or recordings. Its thin and light design makes it virtually invisible while effectively extending the life of your camera.

Installing the cover is simple and quick – just place it on the camera module to secure it. It's perfect for people who want to keep their phone in perfect condition without sacrificing its elegant look.

Tech-Protect Glass Flex+ is a revolutionary hybrid glass that provides maximum protection for the watch screen without compromise. The ultra-thin design of just 0.28 mm makes it virtually invisible yet extremely durable. The ceramic coating with a hardness of 7H effectively protects against scratches and pressure, while maintaining perfect clarity and full touch sensitivity of the screen.

The biggest advantage of Glass Flex+ hybrid glass is its resistance to cracking and shattering – unlike traditional tempered glass, it does not break into sharp shards in the event of an impact, which significantly increases the safety of use. The flexible design allows for a snug fit against the watch screen without creating air bubbles.

Tech-Protect Glass Flex+ is the ideal solution for active users who value reliable screen protection on a daily basis and during sports.

Tech-Protect Supreme is an irreplaceable protective kit that protects the screen and lens of your device during everyday use.

The tempered coating for the display is made of light and milled glass with a thickness of 0.3mm and a hardness of 9H. The crystal clear glass ensures image clarity, perfect reproduction of color saturation and does not disturb the sensitivity of touch. In addition, it is covered with a high-quality oleophobic coating, which minimizes the amount of fingerprints or other impurities left.

Protective lens cap made of high-quality tempered glass with a hardness of 9H. Precisely cut, it provides protection against scratches and breakage. A unique advantage is the simple installation, accessible to any user, even inexperienced users.

Tech-Protect Easy Set+, i.e. the tempered coating for the display, is made of light and milled glass with a thickness of 0.3mm and a hardness of 9H. The crystal clear glass ensures image clarity, perfect reproduction of color saturation and does not disturb the sensitivity of touch. In addition, it is covered with a high-quality oleophobic coating, which minimizes the amount of fingerprints or other impurities left.

Protective lens cap made of high-quality tempered glass with a hardness of 9H. Precisely cut, it provides protection against scratches and breakage.

The set includes installation accessories along with a positioning frame, thanks to which installation is very easy and accessible to literally everyone.

INSTALLATION INSTRUCTIONS:
1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine.
3) Install the shell as evenly as you can - you can position it with the help of the positioning frame from the kit.
4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

Tech-Protect Glass Fit+ is a tempered glass that combines protection with aesthetics. Precisely milled edges and minimal thickness make the glass almost disappear on the screen, while maintaining full touch sensitivity.

The 9H hardness on a ten-point scale means that the glass can withstand contact with keys, coins and other sharp objects that you carry in your pocket every day. The thickness of only 0.3 mm practically does not change the profile of your smartphone and does not affect the responsiveness of the screen. The hardened material dissipates the force of the impact, protecting the display from cracks during falls.

The oleophobic coating minimizes the accumulation of fingerprints and makes it easier to keep the glass clean. Crystal clarity preserves natural colors and image sharpness without affecting the quality of the display. The glass design ensures compatibility with most available cases, so you can freely personalize the look of your phone.

Tech-Protect Glass Fit+ tempered glass is a high-quality protective accessory made of lightweight and precisely milled glass with a thickness of only 0.3mm.

The perfectly matched design fully preserves the sensitivity of the touchscreen. The manufacturer rates its hardness level at 9H on a ten-point scale, which translates into exceptional scratch resistance during everyday use.

The glass is characterized by crystal clarity, thanks to which it retains the natural colors and sharpness of the display. An additional advantage is a special oleophobic coating, which effectively minimizes the accumulation of fingerprints and other impurities on the surface of the glass, thus making it easier to keep it clean.

* The glass is compatible with most cases available on the market.
** Due to the variety of milling of the edges of the displays, a slight halo of air may form around the screen after the film/protective glass is installed on the screen! This is a natural situation and depends on the milling of the screen in a given piece.

INSTALLATION INSTRUCTIONS:
1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine.
3) Install the coating as evenly as you can - you can position it with two sheets, gluing them to the side of the device.
4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

Tech-Protect Glass Fit+ tempered glass is a high-quality protective accessory made of lightweight and precisely milled glass with a thickness of only 0.3mm.

The perfectly matched design fully preserves the sensitivity of the touchscreen. The manufacturer rates its hardness level at 9H on a ten-point scale, which translates into exceptional scratch resistance during everyday use.

The glass is characterized by crystal clarity, thanks to which it retains the natural colors and sharpness of the display. An additional advantage is a special oleophobic coating, which effectively minimizes the accumulation of fingerprints and other impurities on the surface of the glass, thus making it easier to keep it clean.

* The glass is compatible with most cases available on the market.
** Due to the variety of milling of the edges of the displays, a slight halo of air may form around the screen after the film/protective glass is installed on the screen! This is a natural situation and depends on the milling of the screen in a given piece.

INSTALLATION INSTRUCTIONS:
1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine.
3) Install the coating as evenly as you can - you can position it with two sheets, gluing them to the side of the device.
4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

Tech-Protect Glass Spy+ tempered glass is the perfect solution for users who value privacy and data security. Its privacy technology limits the screen's visibility to others, protecting against unauthorized access, which increases the confidentiality of our conversations and messages.

Tech-Protect Glass Spy+ also provides excellent display protection against scratches, impacts, and dents, keeping your phone in pristine condition for a long time. Its hardness level is rated by the manufacturer at 9H on a 10-point scale. It doesn't affect touch sensitivity or color saturation. Additionally, it's coated with a high-quality oleophobic coating, minimizing fingerprints.

It is also worth paying attention to the incredible smoothness of the touch, which affects the comfort of using the phone.
Moreover, the easy installation procedure makes it accessible to any user, even those inexperienced in glass installation.

* Remember to remove and re-add fingerprints after installing the glass - if any.
** Due to the various milling patterns on display edges, a slight air halo may appear around the screen after installing any glass. This condition is due to the milling of the screen itself in a given unit.

INSTALLATION INSTRUCTIONS:
1) Start the installation in the bathroom right after taking a bath - the water vapor will absorb all the dust from the atmosphere and it will not interfere with the installation.
2) Thoroughly clean and degrease the screen surface, then polish it to a shine with a dry cloth.
3) Install the cover as evenly as you can - you can position it using two leaves, sticking them to the side of the device.
4) Eliminate any air bubbles by pressing firmly in circular motions for several dozen seconds. Do this to ensure the adhesive bonds as strongly as possible to the screen.

Tech-Protect Glass Fit+ tempered glass is a high-quality protective accessory made of lightweight and precisely milled glass with a thickness of only 0.3mm.

The perfectly matched design fully preserves the sensitivity of the touchscreen. The manufacturer rates its hardness level at 9H on a ten-point scale, which translates into exceptional scratch resistance during everyday use.

The glass is characterized by crystal clarity, thanks to which it retains the natural colors and sharpness of the display. An additional advantage is a special oleophobic coating, which effectively minimizes the accumulation of fingerprints and other impurities on the surface of the glass, thus making it easier to keep it clean.

* Due to the various milling of the edges of the displays, after installing the film/protective glass on the screen, a slight air halo may be created around the screen! This is a natural situation and depends on the milling of the screen in a given piece.

INSTALLATION INSTRUCTIONS:
1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine.
3) Install the coating as evenly as you can - you can position it with two sheets, gluing them to the side of the device.
4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

Tech-Protect Glass Fit+ tempered glass is a high-quality protective accessory made of lightweight and precisely milled glass with a thickness of only 0.3mm.

The perfectly matched design fully preserves the sensitivity of the touchscreen. The manufacturer rates its hardness level at 9H on a ten-point scale, which translates into exceptional scratch resistance during everyday use.

The glass is characterized by crystal clarity, thanks to which it retains the natural colors and sharpness of the display. An additional advantage is a special oleophobic coating, which effectively minimizes the accumulation of fingerprints and other impurities on the surface of the glass, thus making it easier to keep it clean.

* The glass is compatible with most cases available on the market.
** Due to the variety of milling of the edges of the displays, a slight halo of air may form around the screen after the film/protective glass is installed on the screen! This is a natural situation and depends on the milling of the screen in a given piece.

INSTALLATION INSTRUCTIONS:
1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine.
3) Install the coating as evenly as you can - you can position it with two sheets, gluing them to the side of the device.
4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

Tech-Protect Glass Fit+ tempered glass is a high-quality protective accessory made of lightweight and precisely milled glass with a thickness of only 0.3mm.

The perfectly matched design fully preserves the sensitivity of the touchscreen. The manufacturer rates its hardness level at 9H on a ten-point scale, which translates into exceptional scratch resistance during everyday use.

The glass is characterized by crystal clarity, thanks to which it retains the natural colors and sharpness of the display. An additional advantage is a special oleophobic coating, which effectively minimizes the accumulation of fingerprints and other impurities on the surface of the glass, thus making it easier to keep it clean.

* Due to the various milling of the edges of the displays, after installing the film/protective glass on the screen, a slight air halo may be created around the screen! This is a natural situation and depends on the milling of the screen in a given piece.

INSTALLATION INSTRUCTIONS:
1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine.
3) Install the coating as evenly as you can - you can position it with two sheets, gluing them to the side of the device.
4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

Tech-Protect Glass Fit+ tempered glass is a high-quality protective accessory made of lightweight and precisely milled glass with a thickness of only 0.3mm.

The perfectly matched design fully preserves the sensitivity of the touchscreen. The manufacturer rates its hardness level at 9H on a ten-point scale, which translates into exceptional scratch resistance during everyday use.

The glass is characterized by crystal clarity, thanks to which it retains the natural colors and sharpness of the display. An additional advantage is a special oleophobic coating, which effectively minimizes the accumulation of fingerprints and other impurities on the surface of the glass, thus making it easier to keep it clean.

* The glass is compatible with most cases available on the market.
** Due to the variety of milling of the edges of the displays, a slight halo of air may form around the screen after the film/protective glass is installed on the screen! This is a natural situation and depends on the milling of the screen in a given piece.

INSTALLATION INSTRUCTIONS:
1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine.
3) Install the coating as evenly as you can - you can position it with two sheets, gluing them to the side of the device.
4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

Tech-Protect Glass Fit+ tempered glass is a high-quality protective accessory made of lightweight and precisely milled glass with a thickness of only 0.3mm.

The perfectly matched design fully preserves the sensitivity of the touchscreen. The manufacturer rates its hardness level at 9H on a ten-point scale, which translates into exceptional scratch resistance during everyday use.

The glass is characterized by crystal clarity, thanks to which it retains the natural colors and sharpness of the display. An additional advantage is a special oleophobic coating, which effectively minimizes the accumulation of fingerprints and other impurities on the surface of the glass, thus making it easier to keep it clean.

* Due to the various milling of the edges of the displays, after installing the film/protective glass on the screen, a slight air halo may be created around the screen! This is a natural situation and depends on the milling of the screen in a given piece.

INSTALLATION INSTRUCTIONS:
1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine.
3) Install the coating as evenly as you can - you can position it with two sheets, gluing them to the side of the device.
4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

The Tech-Protect Quick Set Spy+ 2-Pack Privacy Glass is an innovative solution for maximum privacy protection during use. A special filtering technology ensures that the screen content is visible only to the user looking directly at the display, while those watching from the side see only the black screen.

The glass combines two key functions - privacy protection and full protection of the display against scratches, cracks and impacts. Made of tempered glass with a highest hardness of 9H, it provides excellent image quality without affecting the responsiveness of the touch screen.

The kit includes two protective lenses and a special installation frame that guarantees perfect positioning and application of the glass without air bubbles. This comprehensive installation system eliminates the common problems associated with tempered glass application, ensuring a professional result the first time.

Ideal for people working with sensitive data, traveling by public transport or simply valuing their privacy in public places.

* Due to the variety of milling of the edges of the displays, a slight halo of air may form around the screen after the film/protective glass is installed on the screen. This is a natural situation and depends on the screen itself.

INSTALLATION INSTRUCTIONS:
1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine.
3) Install the shell as evenly as you can - you can position it with the help of the positioning frame from the kit.
4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

Tech-Protect Glass SPY+ is a premium tempered glass with advanced privacy technology that protects your data from unauthorized access. A special privacy layer limits the visibility of the screen to outsiders looking from the side, so that the content displayed on your phone remains visible only to you. It's the perfect solution to protect the confidentiality of conversations and messages while traveling, working in public places, or everyday use.

The glass provides excellent protection for the display against scratches, bumps and dents thanks to its 9H hardness. It does not affect the touch sensitivity or color saturation, while maintaining the full functionality of the phone. The high-quality oleophobic coating minimizes the amount of fingerprints left behind, and the milled 2.5D edges ensure a smooth touch and comfort of use. The incredible smoothness of the surface has a positive effect on the comfort of everyday work with the phone.

The easy installation procedure makes the installation affordable for any user, even those who are inexperienced in putting on lenses. Perfect clarity preserves the original image display quality.

* Remember to remove and re-add fingerprints after installing the glass, if any.
** Due to the variety of milling of the edges of the displays, after the installation of any glass, a delicate air halo "may" form around the screen. This condition results from the very milling of the screen in a given piece.

Tech-Protect Easy Set+ is a comprehensive protective kit that protects the screen and lens of the device. The tempered display coating made of lightweight, milled glass with a hardness of 9H provides maximum protection against scratches and cracks.

Crystal clear glass guarantees image clarity, perfect reproduction of color saturation and does not disturb touch sensitivity. Additionally, they are covered with a high-quality oleophobic coating that minimizes the amount of fingerprints and other contaminants left behind. Protective lens cap made of tempered glass with 9H hardness, precisely cut, provides protection against scratches and cracks.

Installation accessories are included in the set, along with the Easy Set+ positioning frame, which makes installation simple and affordable for every user. The frame guarantees perfect positioning of the glass on the screen, eliminating the risk of crooked mounting.

Tech-Protect Easy Set+ is a comprehensive protective kit that protects the screen and lens of the device. The tempered display coating made of lightweight, milled glass with a hardness of 9H provides maximum protection against scratches and cracks.

Crystal clear glass guarantees image clarity, perfect reproduction of color saturation and does not disturb touch sensitivity. Additionally, they are covered with a high-quality oleophobic coating that minimizes the amount of fingerprints and other contaminants left behind. Protective lens cap made of tempered glass with 9H hardness, precisely cut, provides protection against scratches and cracks.

Installation accessories are included in the set, along with the Easy Set+ positioning frame, which makes installation simple and affordable for every user. The frame guarantees perfect positioning of the glass on the screen, eliminating the risk of crooked mounting.

Tech-Protect Glass Spy+ is the perfect solution for users who value the privacy and security of their data. The privacy technology used limits the visibility of the screen to outsiders, protecting against unauthorized access, which contributes to increasing the confidentiality of our conversations and messages.

The Tech-Protect Glass Spy+ also provides excellent protection for the display against scratches, bumps, and dents, ensuring that your phone stays in top condition for a long time. Its hardness level is rated by the manufacturer at 9H on a ten-point scale. It does not affect the touch sensitivity and saturation of the displayed colors. In addition, it is covered with a high-quality oleophobic coating, which minimizes the number of fingerprints left.

It is also worth noting the incredible smoothness of the touch, which affects the comfort of using the phone.
In addition, the easy installation procedure makes it affordable for anyone, even those who are inexperienced in glass installation.

* Remember to remove and re-add fingerprints after installing the glass, if any.
** Due to the variety of milling of the edges of the displays, after the installation of any glass, a delicate air halo "may" form around the screen. This condition results from the very milling of the screen in a given piece.

INSTALLATION INSTRUCTIONS:
1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine.
3) Install the coating as evenly as you can - you can position it with two sheets, gluing them to the side of the device.
4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

Tech-Protect Glass Set+, which is an irreplaceable protective kit that protects the screen and lens of your device during everyday use.

Tempered glass is a high-quality protective accessory made of lightweight and precision-milled glass with a thickness of only 0.3mm.
The perfectly matched design fully preserves the sensitivity of the touchscreen. The manufacturer rates its hardness level at 9H on a ten-point scale, which translates into exceptional scratch resistance during everyday use.

The glass is characterized by crystal clarity, thanks to which it retains the natural colors and sharpness of the display. An additional advantage is a special oleophobic coating, which effectively minimizes the accumulation of fingerprints and other impurities on the surface of the glass, thus making it easier to keep it clean.

Protective lens cap made of high-quality tempered glass with a hardness of 9H. Precisely cut, it provides protection against scratches and breakage.

* The glass is compatible with most cases available on the market.
** Due to the variety of milling of the edges of the displays, a slight halo of air may form around the screen after the film/protective glass is installed on the screen! This is a natural situation and depends on the milling of the screen in a given piece.

INSTALLATION INSTRUCTIONS:
1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine.
3) Install the coating as evenly as you can - you can position it with two sheets of tape by sticking them to the side of the device.
4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

Tech-Protect Glass Fit+ tempered glass is a high-quality protective accessory made of lightweight and precisely milled glass with a thickness of only 0.3mm.

The perfectly matched design fully preserves the sensitivity of the touchscreen. The manufacturer rates its hardness level at 9H on a ten-point scale, which translates into exceptional scratch resistance during everyday use.

The glass is characterized by crystal clarity, thanks to which it retains the natural colors and sharpness of the display. An additional advantage is a special oleophobic coating, which effectively minimizes the accumulation of fingerprints and other impurities on the surface of the glass, thus making it easier to keep it clean.

* The glass is compatible with most cases available on the market.
** Due to the variety of milling of the edges of the displays, a slight halo of air may form around the screen after the film/protective glass is installed on the screen! This is a natural situation and depends on the milling of the screen in a given piece.

INSTALLATION INSTRUCTIONS:
1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine.
3) Install the coating as evenly as you can - you can position it with two sheets, gluing them to the side of the device.
4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

Tech-Protect Glass Fit+ tempered glass is a high-quality protective accessory made of lightweight and precisely milled glass with a thickness of only 0.3mm.

The perfectly matched design fully preserves the sensitivity of the touchscreen. The manufacturer rates its hardness level at 9H on a ten-point scale, which translates into exceptional scratch resistance during everyday use.

The glass is characterized by crystal clarity, thanks to which it retains the natural colors and sharpness of the display. An additional advantage is a special oleophobic coating, which effectively minimizes the accumulation of fingerprints and other impurities on the surface of the glass, thus making it easier to keep it clean.

* Due to the various milling of the edges of the displays, after installing the film/protective glass on the screen, a slight air halo may form around the screen! This is a natural situation and depends on the milling of the screen in a given piece.

INSTALLATION INSTRUCTIONS:
1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine.
3) Install the coating as evenly as you can - you can position it with two sheets, gluing them to the side of the device.
4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

Tech-Protect Glass Fit+ tempered glass is a high-quality protective accessory made of lightweight and precisely milled glass with a thickness of only 0.3mm.

The perfectly matched design fully preserves the sensitivity of the touchscreen. The manufacturer rates its hardness level at 9H on a ten-point scale, which translates into exceptional scratch resistance during everyday use.

The glass is characterized by crystal clarity, thanks to which it retains the natural colors and sharpness of the display. An additional advantage is a special oleophobic coating, which effectively minimizes the accumulation of fingerprints and other impurities on the surface of the glass, thus making it easier to keep it clean.

* The glass is compatible with most cases available on the market.
** Due to the variety of milling of the edges of the displays, a slight halo of air may form around the screen after the film/protective glass is installed on the screen! This is a natural situation and depends on the milling of the screen in a given piece.

INSTALLATION INSTRUCTIONS:
1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine.
3) Install the coating as evenly as you can - you can position it with two sheets, gluing them to the side of the device.
4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

Tech-Protect Glass Fit+ is a tempered glass that combines protection with aesthetics. Precisely milled edges and minimal thickness make the glass almost disappear on the screen, while maintaining full touch sensitivity.

The 9H hardness on a ten-point scale means that the glass can withstand contact with keys, coins and other sharp objects that you carry in your pocket every day. With a thickness of just 0.3 mm, it doesn't change the profile of your tablet and doesn't affect the responsiveness of the screen. The hardened material dissipates the force of the impact, protecting the display from cracks during falls.

The oleophobic coating minimizes the accumulation of fingerprints and makes it easier to keep the glass clean. Crystal clarity preserves natural colors and image sharpness without affecting the quality of the display. The glass design ensures compatibility with most available cases, so you can freely personalize the look of your tablet.