Hager - Seite 8

Contactor 25A 1NO+1NC 230V Standard for the control of circuitsCan be equipped with auxiliary contact and sealig capsRated operational voltage: 230 V Frequency: 50/60Hz Type of connection: With screw Operating temperature: -10 to 50 ° C Storage temperature: -40 to 80 ° C Connection cross-sect rigid cable: 1 / 10mm2 Connection cross-sect. flexible cable: 1 / 6mm2 To reduce the mutual heating when using several contactorsit is recommended to use the LZ060 spacerNumber of modules: 1According to standard: EN 61095

Latching relay 4NO 230VFor pulse control of light installations.Rated current In: 16A AC1Rated Voltage Un: 230 / 400VACVoltage Voltage Un: 230VAC / 110VDCPulse Length: min. 50ms and max 1 hourPower consumption v. AC operation: 48VATouch protection: IP20Connection: 0.75 - 10mm2Dimensions: 1 module of 17.5mmStandard: EN 60669-1 / 2-2Note: Operating pressure must be selected in h.t. Attraction consumption, as well as lead length and dimension must be observed. See technical data in catalog.

MCB 1P 6KA C-6A 1M

Contactor 25A 1NO 230VAC Standard for the control of circuitsCan be equipped with auxiliary contact and sealig capsRated operational voltage: 230 V Frequency: 50/60Hz Type of connection: With screw Operating temperature: -10 to 50 ° C Storage temperature: -40 to 80 ° C Connection cross-sect rigid cable: 1 / 10mm2 Connection cross-sect. flexible cable: 1 / 6mm2 To reduce the mutual heating when using several contactorsit is recommended to use the LZ060 spacerNumber of modules: 1According to standard: EN 61095

Contactor 25A 4NO 24V 2MStandard for the control of circuitsCan be equipped with auxiliary contact and sealig capsRated operational voltage: 400 V AC control voltage: 24V Frequency: 50/60Hz Type of connection: With screw Operating temperature: -10 to 50 ° C Storage temperature: -40 to 80 ° C Connection cross-sect rigid cable: 1 / 10mm2 Connection cross-sect. flexible cable: 1 / 6mm2 To reduce the mutual heating when using several contactorsit is recommended to use the LZ060 spacerNumber of modules: 2According to standard: EN 61095

11 Brass terminals 5x16+6x10 mm2 earth

Phase terminal 8 (1,5-4Q)+1 (1,5-25Q)

Relay 16A 1NO+1NC 12VFor control of circuitsA control device with 3 positions on the frontRated operating voltage AC: 230V AC control voltage: 12Frequency: 50/60Hz Operating temperature: -10 to 50 ° C Connection cross-section with flexible conductor: 1 - 6mm 2 Cross-sectional area for rigid conductors: 1 - 10mm 2 A lifetime mechanical operations: 1000000 Equipment life, electrical operations: 30000 Total power loss at rated power: 1.6 W Number of modules: 1

Safety transformer with galvanic isolation between primary and secondary windings.
All transformers are thermally overload and short circuit protected.
Rated voltage: 230V / 12-24VAC
Load: 40VA
Rated current: In 12V/ 3.33A
Rated current: In 24V/ 1.67A
Ambient temperature: max. 35grC
Standard: EN61558
Dimensions: 4 modules of 17.5mm

Weiße Tür für GD413F

Enclosure 3Row 54M with PE-terminalsH:500mm x W:355mm x D:103mm

Motorstarter zum Schutz von 1- und 3-Phasen-Motoren

RCBO 1P+N 6kA C-10A 300mA ATechnische Daten:Auslösecharakteristik: CPolzahl: 2 PoleNennstrom (In): 10 ANennspannung (Un): 230V +10%/-15%Nennauslösestrom (Idn): 300mAEmpfindlichkeit: Klasse AFrequenz:50Hz Bemessungs-Kurzschlussausschaltvermögen Icn nach EN61009-1 :6kA in h.t.Schutzart IP :IP2x im Gehäuse montiert.Umgebungstemperatur bei Betrieb:-30°C in h.t. EN61009-1 Verschmutzungsgrad :2 in h.t. EN61009-1

W: 80 x H:158 x D:125 mm

LS-Schalter 2P, B-Karakteristik, Nennstrom In:10A

Enclosure IP30 6M 1 row with PE terminal

Gehäuse IP30 4M 1 Reihe mit PE-Terminal

Abdeckung des leeren Raums RAL9010

Motorstarter zum Schutz von 1- und 3-Phasen-Motoren

Enclosure IP65 size: HxWxD mm: 418x602x151

Relais 16A 2 NO 24VAC 1M Relais zur Steuerung von automatischen Steuerungen in elektrischen Systemen in Verbindung mit Dimmer- und Steuertasten Nennspannung: 250V, 50 /60Hz Spulenspannung: 24VAC Betriebskategorie: AC1 Anzahl der Schaltvorgänge:1.000.000 Betriebstemperatur:-10 bis +50°C Anschlussart:solid1-10mm2/flexible1-6mm2 Breite:1 Modul von17,5 mm

Erdanschluss 5 (1,5-4Q)+1 (1,5-25Q)

Latching relay 1NO 24VFor pulse control of light installations.Rated current In: 16A AC1Rated Voltage Un: 230VACVoltage Voltage Un: 2 4VAC / 12VDCPulse Length: min. 50ms and max 1 hourPower consumption v. AC operation: 24VATouch protection: IP20Connection: 0.75 - 10mm2Dimensions: 1 module of 17.5mmStandard: EN 60669-1 / 2-2Note: Operating pressure must be selected in h.t. Attraction consumption, as well as lead length and dimension must be observed. See technical data in catalog.

Kontaktor 25A 2NO 230VAC Standard zur Steuerung von Schaltkreisen ausgestattet mit Hilfskontakt und Dichtkappen Nennbetriebsspannung: 230 V Frequenz: 50/60Hz Anschlusstyp: Mit Schraube Betriebstemperatur: -10 bis 50 ° C Lagertemperatur: -40 bis 80 ° C Anschlussquerschnitt starres Kabel:1 /10mm2 Anschlussquerschnitt flexibles Kabel :1 /6mm2 Zur Reduzierung der gegenseitigen Erwärmung bei Verwendung mehrerer Kontaktoren wird empfohlen, den LZ060-Abstandshalter zu verwenden Modulanzahl :1 Gemäß Standard :EN61095

Hager Terminal QC, PE, 26 connect20 (1,5-4Q)+6 (1,5-25Q) Nennspannung: 230V Nennisolierspannung: 400V Anschluss massiver oder flexibler Kabel:6 x 1,5 - 25 mm2 20 x 1,5 - 4 mm2