Fußbodenheizung - Seite 5

Advanced model, 230V, 15 circuits. The Advanced model allows for floor cooling as well as control of supply temperature etc. Installation, adjustment and handover take place easily with the Danfoss Icon2™ Commissioning App.

Module für 1,3,4,6 Schleifen, kombinierbar bis max. 12 Schleifen, zur Verbindung mit dem Grundkit, Anschluss rechts oder links mit flacher Dichtung oder Anschluss von unten mit optionalem Ellbogenset. Lieferung mit Absperrventil zum Ausgleich (mit Einstellring) und Abschaltung sowie Einstellring zum Ausgleich ohne Werkzeug. Vorbereitete Stellen für Raumnamensschilder und Rücklauf mit Ventilen und Kappen vorbereitet für Aktoren Nr.1000138 (24V männlich) Nr. 1005605 (230V männlich). Schleifenanschluss Q&E 20,Q&E17 komplett mit Q&E-Ringen1025659 ,1042836 Schleifenteilung50 mm Kopfteilung225 mm Maximaldruck:6 bar Maximale Temperatur:60°C Material:Fiberglas-verstärktes Polyamid

Complete insulation for Roth shunt

Fittting for Roth pipe and manifold

Used on Wavin manifold

Shunt with manifold, pump ex

Shunt with manifold, pump ex.

Used for floorheating systems

Sparepart for Roth shunt

Floorheating with high energy efficiency

22 mm Floor chipboard with milled out grooves. Thereare tongues and grooves on all edges of the board.return boards for the Universal Chipboard System donot exist. The bent turns are milled out when the boardis placed. Size: 1800x600x22 mm

Complete shunt

Pump with 6 m lifting height and dimensions 180 mm.The pump is A + rated, that is, power consumption is minimal.

Danfoss TWA-A thermal actuator 24V NO. The thermal actuator TWA-A range is used with electrical on/off-controls to activate several types of Danfoss valves and floor heating manifolds. The actuator is equipped with a visual position indicator to show the

Danfoss-Kompressionsarmaturen. Kupplungen, RA 15/6T, RA 15/6TB, RLV-K, RLV-KD, RLV-KS, RA-C 15, Sammelrohr CFD.

24V room thermostat for installation 80x80 with replaceable frames and touch display. Can be used with a floor sensor.

Roth supply valve for shuntunit as spare part, 1/2" with nut.

Roth heat distribution plate for chipboard board and Universalplate EPS 30. For 16 mm pipe

Complete underfloor heating package with shunt, control unit, room thermostats and thermal actuators and 20 mm couplings.

SALUS GVM-F underfloor heating manifold is a high flow manifold with manual balancing of each circuit.Each zone valve has on the flow pipe a flow meter that can be used for balancing. Alternatively, the built-in manual flow control integrated into the return valve on the return pipe can be used for balancing. Instructions on how to balance the circuit can be found in the distributor box.SALUS GVM-F underfloor heating distributor has a manual vent on each pipe and a drain valve with 1/2 ”thread for hose. Inlet and return pipe connection is 1 ”thread, and the actuator thread is 30 x 1.5 mmContains:Stainless steel manifold set with flow meterEuroconus set for 20 mm PEXVentilation valve on inlet and returnSwivel filling and drain valveMounting brackets for wall mountingWith individual room temperature control. SALUS GVM-F benefits are available with SALUS - wireless control.Properties:Available with SALUS insulation in form-stable EPPComplies with the installation requirements for insulation standard DS 452.Ready for wall mounting.Can be used with water / glycol mixtures with a mixing ratio of up to 30%.Euroconus are included for all inlets and outlets for 20 mm PEX / PE-RT pipe.• Can be integrated into the SALUS Smart Home solution.Can be operated directly from the room thermostat or from the mobile phone, tablet or computer.Benefits are made of stainless steel alloy AISI304 L Premium quality and extruded in dimension1 ”, for optimal distribution and minimum pressure drop.Maximum working pressure: 6 BarMaximum test pressure: 10 bar

SALUS GVU is a complete floor heating shunt solution for underfloor heating with underfloor heating manifold, shunt and circulation pump built together in one unit.Our circulation pump is a 6m pump with capacity up to 16 zones. The underfloor heating manifold is a high flow manifold with manual balancing of each circuit. Each valve has a built-in manual flow control which is very easy to adjust. Instructions on how to balance the circuit can be found in the distributor box.The SALUS GVM floor heating manifold has a manual vent on each pipe and a drain valve with 1/2 ”thread for hose. The Inlet thermostat has a temperature setting of 20 to 55 degrees Celsius. Manifold pipe connection is 1 ", and connection to water for the heat supply is 3/4" socket, and threads to the actuator are 30 x 1.5 mm.

Danfoss Endstück - Endstücke, Halterungen und andere Zubehörteile für die FHF-Verteilerserie. Endstück mit manuellem Entlüftungsventil

Danfoss-Kompressionsarmaturen. Kupplungen, RA 15/6T, RA 15/6TB, RLV-K, RLV-KD, RLV-KS, RA-C 15, Sammelrohr CFD.

Danfoss compression fittings for RA-N 15, RA-FN 15, RA-U/UN 15, RA 15/6T, RA 15/6TB, RTD 15, RLV 15

Danfoss-Verbindungselemente. Kupplungen, RA 15/6T, RA 15/6TB, RLV-K, RLV-KD, RLV-KS, RA-C 15 und Sammelrohr CFD.