Foto & Video Zubehör - Seite 6

1. (1) 15mm dovetail plate
2. (2) Hand grips can be rotated 360 degrees from the Rosettes
3. High density foam handle for better support and stability
4. Quick Release Shoulder Pad (only compatible with the TILTA Alexa Mini baseplate)
5. (2) Side arms
6. Hard Shell Case
7. Great for handheld camerawork with any camera system

TECHNICAL DETAILS

Color: black
Material: aluminum-alloy

Zubehörkit für digitale Kamera, für Coolpix AW100, AW100s, AW110, AW120, AW130

Battery Cover for COOLSHOT LITE STABILIZED, 40i GII, LASER 30, and LASER 50

When configured with the Gravity G Series Dual Pistol Grip Battery Handles, an operator can extend the G1/G2/G2X gimbal body’s operating life with eight fully charged 18650 batteries (4 in each handle). This will give up to 20 hours of power to your gimbal. If used in conjunction with the G1/G2/G2X Battery Pistol Grip Handle, up to 30 hours of runtime can be achieved.

This camera cage provides protective armor for the RED Komodo camera. It provides several 1/4”-20 and 3/8”-16 mounting points for mounting accessories. It also includes two rosettes on each side as well as a cold shoe mount on top. The base of the cage also provides several mounting holes when attaching your camera to gimbals to more easily fine tune the balance of your setup.

A variety of different baseplates can be attached to the bottom of the cage, allowing for various rod mounting and optional power supply configurations.

The quick release top handle, adjustable quick release top handle, and various optional side handles can be attached to the cage to provide for different ways to comfortably operate your camera setup.

This kit of the RED Komodo camera cage will help to fully build out your setup. It includes: the base RED Komodo cage, right side wooden handle, quick release top handle, Arca and Manfrotto quick release baseplates, 15mm LWS baseplate, an Adjustable Cold Shoe Accessory Mounting Bracket, and finally a Dual Canon BP to V Mount Adapter Battery Plate to allow for a longer battery life for your camera.

- Custom designed for the Fujifilm GFX100 II Camera Body
- Mount Accessories via Cold Shoe Receivers and ¼”-20 Threads with Locating Points
- Flexible Compatibility Supports Fujifilm Battery Handle Grip and Electronic Viewfinder
- Cable Clamp Secures HDMI and USB-C Cables via Thumb Screws for Stable Data Transmission
- 1/4"-20 Top Handle Provides Improved Flexibility When Operating and Handling

- Retains access to the camera shoe mount, ports, battery, and display
- Multiple 1/4"-20 accessory threads
- 1/4"-20 camera mounting screw
- Removable Manfrotto-style plate fits Manfrotto-compatible baseplates
- 1/4"-20 mounting threads on the bottom for tripod mounting
- One integrated shoe mount
- Integrated single rod port for optional Tilta single-rod mount
- Aluminum and steel construction

This camera cage provides complete protective armor for the Fujifilm X-T3 and X-T4 cameras.

It provides several 1/4”-20 mounting points as well as two cold shoe mounting points.

The base of the cage also provides several mounting holes when attaching your camera to gimbals to more easily fine tune the balance of your setup.

A variety of different baseplates can be attached to the bottom of the cage, allowing for various rod mounting and optional power supply configurations.

The quick release top handle and various optional side handles can be attached to the cage to provide for different ways to comfortably operate your camera setup.

This kit of the Fujifilm X-T3/X-T4 cage includes: the base Fujifilm X-T3/X-T4 cage, quick release top handle, Arca and Manfrotto quick release baseplates, a clamp to attach an HDMI cable comfortably to the cage (one specifically for the X-T3 and one for the X-T4), and finally the Tiltaing Side Power Handle with Run/Stop Type I (F570 Battery) along with the compatible Fujifilm X series R/S cable.

Compatible with Type II Baseplates and Type I Side Handles.

These cables for the Nucleus-M give you run/stop capabilities in camera systems that support it. Simply plug the 7-pin end of the cable into one of the motors and the other end into the R/S port of the camera.

Note that this cable was specifically designed for the Nucleus-M so the R/S function only works with the Nucleus-M’s own hand unit and hand grips.

Weight: 0.09lbs
Length: 68.6cm
Color: Black
Materials: Copper, rubber, aluminum-alloy

1. (1) 19mm dovetail plate
2. (2) Hand grips can be rotated 360 degrees from the Rosettes
3. High density foam handle for better support and stability
4. Quick Release Shoulder Pad (only compatible with the TILTA Alexa Mini baseplate)
5. (2) Side arms
6. Hard Shell Case
7. Great for handheld camerawork with any camera system

TECHNICAL DETAILS
Color: black
Material: aluminum-alloy

This support bracket helps to fully stabilize and secure your camera when mounted on the Gravity G1, G2, or G2X by attaching from the tilt arm of the gimbal to the hot shoe mount of your camera.

This camera cage provides protective armor for the RED Komodo camera. It provides several 1/4”-20 and 3/8”-16 mounting points for mounting accessories. It also includes two rosettes on each side as well as a cold shoe mount on top. The base of the cage also provides several mounting holes when attaching your camera to gimbals to more easily fine tune the balance of your setup.

A variety of different baseplates can be attached to the bottom of the cage, allowing for various rod mounting and optional power supply configurations.

The quick release top handle, adjustable quick release top handle, and various optional side handles can be attached to the cage to provide for different ways to comfortably operate your camera setup.

This kit of the RED Komodo camera cage will help to fully build out your setup. It includes: the base RED Komodo cage, right side wooden handle, quick release top handle, Arca and Manfrotto quick release baseplates, 15mm LWS baseplate, an Adjustable Cold Shoe Accessory Mounting Bracket, and finally a Dual Canon BP to V Mount Adapter Battery Plate to allow for a longer battery life for your camera.

LCD-Anzeigemodul, für HD Helmet HERO; HD Hero Naked; HD HERO2; HD Motorsports Hero; HD Surf HERO; Surf HERO

Tilta TA-SFH1-97-G Kamera-Montagezubehör Griff

Kamera-Slider-Stützkit für Autos mit Schwenk-/Neige-Design, Mehrpunkt-Montage an der Autotür mit Ratschen, Saugnäpfen und magnetischen Stützen sowie Unterstützung für Kameralasten bis 30 kg.

SmallRig 4614 Camera Slider Support Kit for Cars ist für Outdoor-Autoaufnahmen konzipiert und bietet ein sicheres Setup, das die Kameramanövrierbarkeit für Aufnahmen im Auto verbessert, während Tür- und Fensterbedienung ungehindert bleiben. Es enthält eine Regenabdeckung zum Schutz vor Wassereintritt und ist für den Betrieb bei Temperaturen von -40°C bis 65°C ausgelegt.

• Befestigung an der Autotür mit Ratschen, Saugnäpfen und magnetischen Stützen
• Unterstützt Kameras bis 30 kg (empfohlen für Geschwindigkeiten nicht über 60 km/h)
• Schwenk- & Neigeeinheit für weichere Bildausschnittanpassungen
• Erhält die Türfunktion und Fensterbedienung
• Regenabdeckung sowie staub- und wasserbeständige Dichtung enthalten
• Kompatibel mit Geräten mit 3/8"-16-Gewindebohrung

Zuverlässige, am Auto montierte Stütze für stabile, flexible Aufnahmen bei wechselnden Wetter- und Temperaturbedingungen.

15mm Dual Baseplate Arca Manfrotto kit

Camera Cage for Canon C400 Advanced Kit

Handlebar Mount for Hydra Alien Mini – Titanium Gray

LUPO V-Mount battery plate for dayled 1000

TILTA Wooden Handle 2.0 Arri Alexa Mini R/S Ca nc Nucleus-m

TILTA Nucleus-M 7-7Pin Motor to Motor Conn. Cable 18cm

TILTA Nucleus-M 7-7Pin Motor to Motor Conn. Cable 55cm

SYRP Quick Release Plate Genie II Linear Head 90mm

TILTA Sony Venice backpack module Vlock mount

The AVENGER Polyholder F1510 is a robust and adjustable holder designed for securely mounting and supporting polycarbonate, acrylic, or similar lightweight materials during photography and film productions.