Entwässerungsprodukte - Seite 2

Stücke aus PEH zum Schweißen werden für Abwasserinstallationen verwendet. Mit TPE-Schalldämpfung.

Available in 8, 10 and 12 mm heights (depending on the thickness of the floor tile). The rubber insert ensures a snug fit inside the unit. A countersunk bearing ensures that the grating fits perfectly into the frame. The frame is non-optional and has two functions: To support the grating and give a perfectly flush finish with the tiled floor.

NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

AMAX Pro ist ein Abfluss in PP für Entwässerungssysteme in Gebäuden zur Beförderung von Abwasser.

The set consists of a panel, rail, heightener set and screws. The set must be assembled before installation.

Includes 2 x hooks to be used for lifting the panel.

The panel solution is placed directly inside the drain unit.

The rail is specially designed to provide a snug fit. Installed with HighLine frame.

The heightener set to adjust the panel is included, so that the panel can be matched to the frame height.

NB: PVD-treated surface.

The Wafix PP system is made from the reusable PP (Polypropylene), which gives both pipes and fittings good physical and chemical properties. The PP material used has a high E-module, which gives the pipes a good length stiffness and a great impact strength. Therefore, the Wafix PP system withstands the impacts and shocks that can occur during installation and operation - even at minus degrees. Wafix PP is a complete drainage system with pipes and fittings in the dimensions: Ø32 mm Ø40 mm Ø50 mm Ø50 mm Ø75 mm Ø110 mm The program also comes in a white version in dimensions Ø32, Ø40 and Ø50 mm, especially suitable for visible installations. The system's unique Fix·lock® sealing ring seals on as many as three points, providing a large construction surface against the pipe and ensuring that your joints are 100% dense each time. It provides extra security and security if you insert or hide the pipes in a shaft.

Wafix Silikon-Schmiermittel in Tube mit 50 Gramm.

Exclusive frame design with upper section of solid 4-mm stainless steel.

Insert ensures a snug fit inside the drain unit.

The frame enhances the exclusive design of the floor drain.

Frame available in 10, 12, 15 and 25 mm heights (depending on the thickness of the floor tile).

NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

Meets capacity and self-cleaning requirements according to EN 1253 (the pan-European standard for floor drains) and is VA-approved.

The water trap can be removed from the outlet unit and then dismantled for cleaning.

Fixture Unidrain 1004 700 mm ohne Flansch.

The Wafix PP system is made from the reusable PP (Polypropylene), which gives both pipes and fittings good physical and chemical properties. The PP material used has a high E-module, which gives the pipes a good length stiffness and a great impact strength. Therefore, the Wafix PP system withstands the impacts and shocks that can occur during installation and operation - even at minus degrees. Wafix PP is a complete drainage system with pipes and fittings in the dimensions: Ø32 mm Ø40 mm Ø50 mm Ø50 mm Ø75 mm Ø110 mm The program also comes in a white version in dimensions Ø32, Ø40 and Ø50 mm, especially suitable for visible installations. The system's unique Fix·lock® sealing ring seals on as many as three points, providing a large construction surface against the pipe and ensuring that your joints are 100% dense each time. It provides extra security and security if you insert or hide the pipes in a shaft.

HighLine Color besteht aus PVD-behandeltem Edelstahl. Der Rahmen muss mit einer Platte kombiniert werden.

Reduzierstück für den Abfluss der Küchenspüle aus weißem Kunststoff

The Wafix PP system is made from the reusable PP (Polypropylene), which gives both pipes and fittings good physical and chemical properties. The PP material used has a high E-module, which gives the pipes a good length stiffness and a great impact strength. Therefore, the Wafix PP system withstands the impacts and shocks that can occur during installation and operation - even at minus degrees. Wafix PP is a complete drainage system with pipes and fittings in the dimensions: Ø32 mm Ø40 mm Ø50 mm Ø50 mm Ø75 mm Ø110 mm The program also comes in a white version in dimensions Ø32, Ø40 and Ø50 mm, especially suitable for visible installations. The system's unique Fix·lock® sealing ring seals on as many as three points, providing a large construction surface against the pipe and ensuring that your joints are 100% dense each time. It provides extra security and security if you insert or hide the pipes in a shaft.

For shower cubicles without fixed walls.

The drain unit has four floor flanges.

Including four heght-adjustable feet (40-190 mm).

Self-cleaning trap with a capacity of 0.4-0.6 l/s depending on the outlet unit it is installed in. Meets the requirements for capacity and self-cleaning according to EN1253 (the pan-European standard for floor drains) and is VA approved. Suitable for most outlet units, including older models. Can replace water trap 1820.0010 and 1820.0040, if they are installed at the top of the drain unit. A hook to lift the water trap up from the outlet unit and a packet of silicone lubricant are included

ShowerLine has a built-in slope, so that the floor in the shower cubicle slopes correctly by 2% down towards the floor drain. For added wetroom safety, the shower cubicle is framed by flanges on three sides.

The shower screen is mounted in the track on the fixed module, to eliminate the risk of working loose over time. Combine with: outlet unit, frame, grating/panel and shower screen.

Geberit Pluvia Dachablauf: Maximale Abflussrate=9l/s

Das Wafix PP-System besteht aus dem wiederverwendbaren PP (Polypropylen), das sowohl Rohren als auch Fittings gute physikalische und chemische Eigenschaften verleiht. Das verwendete PP-Material hat einen hohen E-Modul, der den Rohren eine gute Längssteifigkeit und eine hohe Schlagfestigkeit verleiht. Daher hält das Wafix PP-System den Auswirkungen und Stößen stand, die während der Installation und des Betriebs auftreten können - selbst bei Minusgraden. Wafix PP ist ein komplettes Entwässerungssystem mit Rohren und Fittings in den Abmessungen: Ø32 mm Ø40 mm Ø50 mm Ø50 mm Ø75 mm Ø110 mm Das Programm ist auch in einer weißen Version in den Abmessungen Ø32, Ø40 und Ø50 mm erhältlich, die besonders für sichtbare Installationen geeignet ist. Der einzigartige Fix·lock® Dichtungsring des Systems dichtet an bis zu drei Punkten ab, bietet eine große Konstruktionsfläche gegenüber dem Rohr und stellt sicher, dass Ihre Verbindungen jedes Mal zu 100% dicht sind. Es bietet zusätzliche Sicherheit, wenn Sie die Rohre in einem Schacht einsetzen oder verstecken möchten.

Stücke aus PEH zum Schweißen werden für Abwasserinstallationen verwendet. Mit TPE-Schalldämpfung.

Geberit Pluvia Dachablauf mit Befestigungsflansch, für Dachfolien: Maximale Abflussrate=12l/s

Sanit Abflussfalle für Waschmaschine/Geschirrspüler 40 mm mit Chrombogen

Wavin PVC bend 45° 400mm

Wavin PVC sliding sleeve 250mm

Geberit Pluvia Kontaktbahn, gestanzt, mit Bitumenbahnen: Abdichtung der Verbindung = Bitumen / SBS

dBlue ist ein Abflussrohr aus PP (Polypropylen) in 3 Schichten. Es eignet sich für die Installation an Orten, an denen eine Geräuschreduzierung erforderlich ist. Das Rohrsystem hat einen nachgewiesenen Schallpegel von 19 dB (A). Wenn strengere Anforderungen an den Schallschutz gestellt werden, empfehlen wir FRIAPHON.