The Danfoss Dynamic Valve is an innovative two-in-one radiator valve. It combines a thermostatic radiator valve for accurate temperature control with an automatic adjustment valve – all in the same valve.

Danfoss RLV-Versammlungen. Mit Hilfe eines Absperrventils vom Typ RLV kann jeder Heizkörper einzeln abgeschaltet werden, um eine problemlose Wartung oder Reparatur ohne Auswirkungen auf andere Heizkörper im System zu ermöglichen. Ein Ablasshahn ist als Zubehör zum Entleeren erhältlich

Danfoss RLV-Versammlungen. Mit Hilfe eines Absperrventils vom Typ RLV kann jeder Heizkörper einzeln abgeschaltet werden, um eine problemlose Wartung oder Reparatur ohne Auswirkungen auf andere Heizkörper im System zu ermöglichen. Ein Ablasshahn ist als Zubehör zum Entleeren erhältlich

Return coupling with shut-off and drain, valve body, type RLV DN 15, angled. The return coupling type RLV makes it possible to shut off each individual radiator, e.g. for maintenance or repair, without affecting the other radiators in the system.

Danfoss FJVR Rücklaufventil. Das FJVR-Ventil (Normaldurchfluss) wird ausschließlich in Verbindung mit dem FJVR-Rücklauftemperaturbegrenzer-Sensor verwendet. Das FJVR-Ventil wird am Auslass eines Heizkörpers oder Fußbodenheizungskreislaufs montiert. Das Ventil - und der Sensor können eingebaut werden

Danfoss ABNM A5 thermic actuator. Danfoss ABN A5 (On/Off, 24/120/230V) and ABNM A5 LIN/LOG (0-10V, 24V AC and DC) are thermic actuators for AB-QM DN10-32 with 5 mm/6.5 mm stroke, plug-in cable and IP54 available as NC and NO.

Danfoss FJVR Rücklaufventil. Das FJVR-Ventil (Normaldurchfluss) wird ausschließlich in Verbindung mit dem FJVR-Rücklauftemperaturbegrenzer-Sensor verwendet. Das FJVR-Ventil wird am Auslass eines Heizkörpers oder Fußbodenheizungskreislaufs montiert. Das Ventil - und der Sensor können eingebaut werden

Kabel für ABNM A5, 1 Meter, halogenfrei (0-10V). MERKE DIR 406848800 UND 460947976

Danfoss AME 10 24V elektrischer Stellantrieb. 0-10V für Ventiltypen VS2, VM2 (DN15 + 20 Kvs 6,3) VB2 (DN15 + 20) und VMV30 (DN15-40)

Danfoss AME 20 actuator. AMV 20/23 are actuators for three point control and AME 20/23 are actuators for modulating control, furthermore AMV(E) 23 actuators have safety function. The spring return actuators can be used to provide safety shut off on power

DEVIpipeheat 10 V3, 8m Self limiting with Danish plug

DEVIpipeheat 10 V3, 12m Self limiting with Danish plug

Danfoss SSM underfloor heating manifold in stainless steel with output for 4 heating circuits. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is without a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

Return thermostat for automatic regulation of the return water temperature from hot water tanks that are directly connected to the district heating system.

Danfoss SSM underfloor heating manifold in stainless steel with output for 8 heating circuits. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is without a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

DEVItronic TM Entfeuchter sind die perfekte Lösung, um Probleme mit Kondensation in abgeschirmten elektrischen Installationen wie Schalttafeln und Steuerschränken zu vermeiden. DEVItronic TM löst Feuchtigkeits- und Kondensationsprobleme, indem es die Temperatur einige Grad über der Umgebungstemperatur erhöht. DEVItronic TM hat eine große Oberfläche und eine niedrige Oberflächentemperatur, was sicherstellt, dass der Heizer keine Schäden an Kunststoffteilen und -schränken verursacht.

DEVImat TM 100T (100W / m2) is a thin heating cable mat, self-adhesive all-in-one mat, with a very low recess height of only 3.5 mm, perfect for renovating existing floors. The heating mat can be used for both total and comfort heating.DEVImat TM is a 360 ° fully shielded double-conductor heating cable of extremely high quality, with FEP insulated conductors and red PVDF outer casing (non-UV resistant). The round profile and robust construction ensure a quick, easy and secure installation.The cold lead is a solid cable installation cable that ensures quick installation. A clearly visible assembly prevents accidental installation of the heating cable in the wall.

DEVImat TM 100T (100W / m2) is a thin heating cable mat, self-adhesive all-in-one mat, with a very low recess height of only 3.5 mm, perfect for renovating existing floors. The heating mat can be used for both total and comfort heating.DEVImat TM is a 360 ° fully shielded double-conductor heating cable of extremely high quality, with FEP insulated conductors and red PVDF outer casing (non-UV resistant). The round profile and robust construction ensure a quick, easy and secure installation.The cold lead is a solid cable installation cable that ensures quick installation. A clearly visible assembly prevents accidental installation of the heating cable in the wall.

DEVItronic TM Entfeuchter sind die perfekte Lösung, um Probleme mit Kondensation in abgeschirmten elektrischen Installationen wie Schalttafeln und Steuerschränken zu vermeiden. DEVItronic TM löst Feuchtigkeits- und Kondensationsprobleme, indem es die Temperatur einige Grad über der Umgebungstemperatur erhöht. DEVItronic TM hat eine große Oberfläche und eine niedrige Oberflächentemperatur, was sicherstellt, dass der Heizer keine Schäden an Kunststoffteilen und -schränken verursacht.

Danfoss RA-G Ventil. Die Hochleistungsventile vom Typ RA-G werden hauptsächlich in Einrohrsystemen eingesetzt. Alle RA-G Ventile können mit allen thermostatischen Sensoren der RA-Serie kombiniert werden.

DEVIflex TM 18T (18W / m) heating cable is designed for concrete embedding or similar. both total, accumulating and comfort underfloor heating.DEVIflex TM is a 360 ° fully shielded double-conductor cable of extremely high quality with a robust outer sheath (non-UV resistant). The round profile and robust construction ensures a fast, light and secure installation in many indoor floor structures and pipe protection applications.The cold lead is an installation cable with solid conductors that ensures quick installation, and the clear and visible assembly prevents accidental installation of the heating cable in the wall.

Danfoss 003Z4005 Sanitärarmatur

ASV-PV is a automatic balancing valve that maintains constant differential pressure across the riser. ASV-PV can be set to control the differential pressure in several Dp setting ranges: Between 5 to 25 kPa (10 kPa factory setting), 20 to 40 kPa (30 kPa), 35 to 75 kPa (60 kPa), and 60 to 100 kPa (80 kPa). When supplied ASV-PV is set at factory setting. It incorporates a shut-off function and a drain cock. ASV-PV is designed for installation in the return pipe.

Danfoss AB-QM Anschlussstücke. Verbindung mit Union, 1 Stk.

Danfoss 003Z4000 Sanitärarmatur