D-LINE

Half circle 22 x 22mm profile covers expansion gaps between floors and skirting, while providing an easy-to-use cable duct around floor perimeters. The 22 x 22mm (W x H) dimensions scale well to blend with popular skirting boards, while providing capacity for cable bending radii around corners.

Traditional floor trim is usually nailed, and requires perfect measuring of lengths before corners can be mitre-cut at 45º angles. By contrast D-Line half circle can simply peel-and-stick to skirting, while the Clip-Over corner-bends save any need for precise measuring and can cover oblique cuts.

Compared to regular floor trim, D-Line features combine to enable approximately 50% quicker installations – and then it’s easy to add or remove cables!

The Kit consist of:
3x22x22mm Cable duct
1x Internal Bend Join lengths around 90 degree inside corners
1x External Bend Join lengths around 90 degree outside corners
2x Coupler Join 2 lengths of same profile on flat surface
2x Cable outlets
2x End Cap Neatly finish open ends

Toiletbrush head, grey, with inline

The D-Line 20 x 10mm Micro+ cable managment solution gives a neat solution for single cables, while offering additional internal capacity that can be useful around corners. Ideal for flexible cables (up to 8mm outer diameter), also fibre-optic, satellite/aerial and broadband cable installations.

Unique stylish ‘D-Line’ appearance
Saves channelling walls
Patented hinge &, click-lock lid
Self-adhesive
Paintable
8 adaptors included to enable popular connections:
(4 x 20x10mm x 1m Trunking White)
- 1 x Clip-Over Internal Bend
- 1 x Clip-Over External Bend
- 1 x Clip-Over Flat Bend
- 3 x Smooth Fit Couplers
- 2 x Smooth Fit End Caps
Can be shortened arbitrarily
A smart alternative to traditional offers
No sharp edges, gentle on impact
Fully safety tested and certified to BS EN 50085-1:2005
Color: white

D-Line Cable Tidy Units provide the most popular solution to contain extension sockets and cable spaghetti. The smart tech design blends with modern surroundings. 3x rear cable entry/exit slots enable cables to be routed to left-side, right-side or vertical.

Fully safety tested, and produced from electrically-safe robust ABS material with an effective click-lock lid, these Socket Enclosures sort unsightly cables and contribute to a positive Health & Safety culture.

Cable Protectors, made from a flexible abrasion resistant pvc, supplied coiled - uncoils to lay flat. (No need to add to boiling hot water to uncoil). D-Line Floor Cable Cover has a neat tapered design, so ideal to protect cables and address a cable trip hazard in areas with regular foot traffic. Linkability allows you to cover any length of cable required & then re-join cut length at a later date.

D-Line Floor Cable Tidy Protector have a ribbed non-slip base & pre-split backing for ease of installation; simply push cords into cable cavity. 2 x Connecting Pins supplied per pack - join multiple lengths of D-Line Cable Protectors, to cover any length of cable. Ideal for offices, factories, construction, gyms, hotels, events, whenever you need to cover cables across floors!

1x Flat Bend: Change direction by 90 degrees on flat surfaces
2x Internal Bend: Join lengths around 90 degree inside corners
2x External Bend: Join lengths around 90 degree outside corners
2x Cable In/Outlet: Takes cables in or out of a trunking. Use between lengths on straight runs.
1x Coupler: Join 2 lengths of same profile on flat surface
2x End Cap: Neatly finish open ends

D-Line Cable Tidy Units provide the most popular solution to contain extension sockets and cable spaghetti. The smart tech design blends with modern surroundings. 3x rear cable entry/exit slots enable cables to be routed to left-side, right-side or vertical.

Fully safety tested, and produced from electrically-safe robust ABS material with an effective click-lock lid, these Socket Enclosures sort unsightly cables and contribute to a positive Health & Safety culture.

Half circle 22 x 22mm profile covers expansion gaps between floors and skirting, while providing an easy-to-use cable duct around floor perimeters. The 22 x 22mm (W x H) dimensions scale well to blend with popular skirting boards, while providing capacity for cable bending radii around corners.

Traditional floor trim is usually nailed, and requires perfect measuring of lengths before corners can be mitre-cut at 45º angles. By contrast D-Line half circle can simply peel-and-stick to skirting, while the Clip-Over corner-bends save any need for precise measuring and can cover oblique cuts.

Compared to regular floor trim, D-Line features combine to enable approximately 50% quicker installations – and then it’s easy to add or remove cables!

The Kit consist of:
3x22x22mm Cable duct
1x Internal Bend Join lengths around 90 degree inside corners
1x External Bend Join lengths around 90 degree outside corners
2x Coupler Join 2 lengths of same profile on flat surface
2x Cable outlets
2x End Cap Neatly finish open ends

The D-Line light duty floor cable cover reduces the amount of trailing cables that you have in your office, preventing accidents and keeping your office organised. Black in colour, it suits every office without making it look untidy. The inner channel of this cover measures 14 mm × 8 mm, suitable for a range of common cables.

Flexible PVC

D-LINE Accessory Kit 25x16 White

Kabelführungsrohr, 1.1 m, Schwarz

2x Flat Bend: Change direction by 90 degrees on flat surfaces
2x Internal Bend: Join lengths around 90 degree inside corners
2x External Bend: Join lengths around 90 degree outside corners
2x Equal Tee: Use to join 3 lengths of same profile
3x Coupler: Join 2 lengths of same profile on flat surface
2x End Cap: Neatly finish open ends

The D-Line 30 x 15mm Mini cable managment solution offers a subtle appearance to make surface cable installations look attractive! The ½-round shape can blend to resemble the natural top-section of skirting boards, while offering a modern solution for vertical cable drops and runs across ceilings.

Unique stylish ‘D-Line’ appearance
Saves channelling walls
Patented hinge &, click-lock lid
Self-adhesive
Paintable
7 adaptors included to enable popular connections
(3 x 30x15mm x 1m Trunking White)
- 1 x Clip-Over Internal Bend
- 1 x Clip-Over External Bend
- 1 x Clip-Over Flat Bend
- 2 x Smooth Fit Couplers
- 2 x Smooth Fit End Caps
Can be shortened arbitrarily
A smart alternative to traditional offers
No sharp edges, gentle on impact
Fully safety tested and certified to BS EN 50085-1:2005
Color: white

1x Flat Bend: Change direction by 90 degrees on flat surfaces
2x Internal Bend: Join lengths around 90 degree inside corners
2x External Bend: Join lengths around 90 degree outside corners
2x Cable In/Outlet: Takes cables in or out of a trunking. Use between lengths on straight runs.
1x Coupler: Join 2 lengths of same profile on flat surface
2x End Cap: Neatly finish open ends

Couplings for D-Line cable ducts in semi-circular design, with a fine Oak Finish

D-Line Cable Tidy Units provide the most popular solution to contain extension sockets and cable spaghetti. The smart tech design blends with modern surroundings. 3x rear cable entry/exit slots enable cables to be routed to left-side, right-side or vertical.

Fully safety tested, and produced from electrically-safe robust ABS material with an effective click-lock lid, these Socket Enclosures sort unsightly cables and contribute to a positive Health & Safety culture.

D-Line Cable Tidy Units provide the most popular solution to contain extension sockets and cable spaghetti. The smart tech design blends with modern surroundings. 3x rear cable entry/exit slots enable cables to be routed to left-side, right-side or vertical.

Fully safety tested, and produced from electrically-safe robust ABS material with an effective click-lock lid, these Socket Enclosures sort unsightly cables and contribute to a positive Health & Safety culture.

Angled joint connectors for D-Line semi-circular cable ducts, set of four parts.

13pcs

8 pcs D-Line connections for cable ducts in oak colour. Lets you hide your cables in an elegant way. Custom size 22 x 22 mm.

Angled joint connectors for D-Line semi-circular cable ducts, set of four parts.

D-LINE Accessory Kit 22x22 Oak

13pcs

2x Flat Bend: Change direction by 90 degrees on flat surfaces
2x Internal Bend: Join lengths around 90 degree inside corners
2x External Bend: Join lengths around 90 degree outside corners
2x Equal Tee: Use to join 3 lengths of same profile
3x Coupler: Join 2 lengths of same profile on flat surface
2x End Cap: Neatly finish open ends