Bosch - Seite 160

Bohrer, für Metall, Spiralbohrer, 10 Stück, 9.5 mm, Länge: 125 mm

C430 Expert for Wood and Paint has an impressive long lifespan when sanding in wood, veneer, and solid surfaces. In addition, the electrostatic, open surface with spaces between the grains ensures uniform sanding and prevents clogging. The strong abrasive grains are resistant to wear, allowing for prolonged and repeated use. This product is intended for cleaning up and sanding paint, varnish, putty, primer and wood-based materials; it is suitable for intermediate sanding of lacquer on surfaces. It is also suitable for sanding after wetting certain materials as well as smoothing out feather edges. The C430 Expert for Wood and Paint abrasive sheet fits all orbital sanders. The fully synthetic resin-bonded grain provides long life. The extremely flexible C-/B- paper backing allows the product to be folded without cracking.
Package of 5 pieces.

It has a universal shank of 0.5". The S 522 EF Flexible for Metal bayonet saw blade is intended for use with compact saws. Its fine tooth pitch (1.4 mm) cuts through sheet metal with the most common thicknesses. In addition, the BIM blade (bimetal) is developed for long life when used in standard strength sheet steel. The fine tooth pitch allows cutting of semi-thick sheet metal with a thickness of 1.5 to 4 mm. The blade's short length (100 mm) has a cutting capacity of up to 50 mm and is ideal for use with compact cordless saws.S 522 EF
BIM, laid out, milled
Specially optimized for use in compact saws.
Thin sheets (1.5-4mm)

The C410 Standard for Wood and Paint is characterized by a high material removal rate when hand sanding wood and paint. This universal hand sanding product ensures smooth and consistent material removal thanks to its robust abrasive surface coated with semi-open aluminum oxide grains. In addition, the electrostatically open surface allows for good dust extraction, preventing clogging and ensuring effective sanding and clean surface results. Intended for all types of hand sanding on wood, wood-based materials, veneer as well as solid surfaces, it is suitable for intermediate sanding of lacquer on surfaces and rounded edges. Also ideal for roughening and grinding down paint, varnish, putty as well as roughening and fine grinding feather edges, primer coats or putty. The sheet is covered with strong semi-open aluminum oxide abrasive grains that ensure uniform surface quality. The electrostatically open coating ensures consistent material removal. Additionally the abrasive grain is attached using a fully synthetic resin bond on C-weight backing material which provides good flexibility and optimal grinding properties.The C410 Standard for Wood & Paint Sandpaper Roll can be torn into appropriate pieces making it suitable to use with hand-sanding blocks.
5 m

Trennscheibe für Stahl, 125 mm

Schleifrolle, für Weichholz, Hartholz, Körnung: 80, 93 mm x 5 m

Screwdriver

Der Dübelsetzer ist aus Werkzeugstahl gemacht. Mit dem Dübelsetzer kann man ganz einfach Dübellöcher markieren. Der Dübelsetzer ermöglicht schnelles und unkompliziertes Markieren von Löchern, was die Arbeit erleichtert. Das Set enthält 4 Teile zum Setzen von Dübeln

Diamanttrennscheibe, für Beton, Mauerwerk, 300 mm

Kreissägeblatt, für Holz, 254 mm, 54 Zähne

Handle M 8 with Vibration-Control

Flapscheibe, Körnung: 40, 125 mm

Meißel, für Beton, Ziegelsteine, flach, SDS-max, Länge: 400 mm, Breite: 25 mm

Drahtbürste für Aluminium, Metallrohre, Nichteisenmetalle, Stahl und Metallprofile, 100 mm

Diamant-Trennscheibe für Keramik und Stein, geeignet für Marmor und weiche keramische Wandfliesen, mit 6.5 cm Blattdurchmesser, 1.5 cm Bohrungsgröße und 1.9 mm Schnittbreite.

Bosch Diamond Cutting Disc Standard for Ceramic ist für Schneidaufgaben in Materialien wie Marmor und weichen keramischen Wandfliesen ausgelegt und ist auch für den Einsatz an Wand- und Bodenfliesen aufgeführt; geliefert als 1 Stück pro Packung.

Es ist kompatibel mit Bohrhämmern. Der Zusatzgriff macht es sicher, mit dem Bohrer zu arbeiten.
Griff für Bohrhämmer

SDS max RTec Sharp flat chisel is ideal for various tasks in concrete and provides less jamming and faster progress than standard flat chisels. Its self-sharpening power ribs create not only transverse but also vertical cracks in the material. This provides a higher speed of material removal and prevents the chisel from getting stuck. The chisel is intended for use in concrete and bricks for tasks such as folding, demolition, adaptation work, as well as renovation of joints and clearing reinforcements. The patented RTec element delivers a higher speed of material removal than standard flat chisels do. It is compatible with SDS max shaft systems.
Self-sharpening RTec Speed flat chisel with long lifespan and 100% higher speed of material removal
SDS max RTec Sharp flat chisel is ideal for various tasks in concrete

It has a cylindrical shaft system (the shaft has the same diameter as the drill head) and is intended for use in drilling stands and screwdrivers. The ground HSS spiral drill bit for drilling through metal with maximum precision. The exposed 135-degree two-part self-centering tip of the drill head combines active cutting with perfect centering without displacement for maximum precision. With the two-part tip, it is also unnecessary to mark center points in advance or pilot bore up to 10 mm. This precision-ground drill head, made of HSS (high-speed steel), provides up to 40% faster drilling and up to 50% lower clamping pressure than standard ground HSS cutting edge drill heads. This drill head is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, reduced cast iron, non-ferrous metals and hard plastic. The ground HSS spiral drill bit is manufactured according to DIN 338. The type N (notch angle) of the drill head has a 135-degree tip and a diameter tolerance of h8.
Metal Drill Set HSS-G with five parts, point angle 135° ,1/4" hexagonal shank

Bohrhammer/Treiber, 2 Geschwindigkeiten, Bohrfutterschlüssel 13 mm, 40 N·m, 2 Akkus, Ladegerät enthalten, 18 V

Ersatzbürste für den Staubsauger-Aufsatz des Bosch Betonschleifers GBR 14 CA. Ersatzbürste für die Absaughaube des Bosch Betonschleifers GBR 14 CA Professional

Die Verlängerung hat einen 1/4-Zoll-Sechskantschaft und ist für den Einsatz mit Schraubendrehern vorgesehen. Die Sechskantschaftverlängerung für 1/4-Zoll-Self-Cut Speed Flachbohrer sorgt für eine größere Reichweite beim Bohren. Die Verlängerung gibt es in zwei verschiedenen Längen von 152 mm und 305 mm und eignet sich für alle Flachbohraufgaben, bei denen eine größere Reichweite erforderlich ist.
Verlängerung mit 1/4" (6,35 mm) Sechskantschaft für Self Cut Speed Flachbohrer

Bohrhammer, schnurlos, 4 Modi, SDS-plus, 2 Joules Ladegerät enthalten, 18 V

Scheibenadapter, 150 mm