Trennscheibe für Edelstahl, Inox-Stahl, 2 Stück, 76 mm

R574 Best for Metal has an exceptional lifespan when grinding rough surfaces, deburring, removing welds and rust removal on metal surfaces. Robust and long-lasting abrasive surface coated with zirconia aluminum/semi-fused aluminum oxide grains. The backing material is made of vulcanized rubber, which ensures stability despite long-term work. The abrasive grain is attached using a 100% synthetic resin bond, ensuring exceptional durability for tough tasks. R574 Best for Metal is intended for angle grinders and drills

The HSS spiral drill with PointTeQ allows for fast drilling in metal thanks to the design of the tip with PointTeQ. It is quick and easy to start drilling as the self-centering tip prevents wandering. Due to the increased drilling speed, less heat and wear are generated. The PointTeQ tip design ensures that it remains sharp and has a long lifespan. This drill is suitable for drilling in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron, and plastic. There is low risk of breakage, especially for drills with a diameter under 6 mm as they are made with an extremely flexible core. Its black oxide coating ensures quick chip removal. The HSS PointTeQ spiral drill is manufactured according to DIN 338 standards. The drill type is N (angle of flute) with a 135-degree point angle. It has a cylindrical shank system (the shank has the same diameter as hammer drills) and is intended for use in pillar drills or screwdrivers.
Package contains 2 pieces.

The HSS spiral drill with PointTeQ allows for fast drilling in metal thanks to the design of the tip with PointTeQ. It is quick and easy to start drilling as the self-centering tip prevents wandering. Due to the increased drilling speed, less heat and wear are generated. The PointTeQ tip design ensures that it remains sharp and has a long lifespan. This drill is suitable for drilling in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron, and plastic. There is low risk of breakage, especially for drills with a diameter under 6 mm as they are made with an extremely flexible core. Its black oxide coating ensures fast chip removal. The HSS PointTeQ spiral drill is manufactured according to DIN 338 standards. The drill type is N (angle of flute) with a 135-degree point angle. It has a cylindrical shank system (the shank has the same diameter as hammer drills) and is intended for use in pillar drills or screwdrivers.
Package contains one piece.

The HSS spiral drill with PointTeQ allows for fast drilling in metal thanks to the design of the tip with PointTeQ. It is quick and easy to start drilling as the self-centering tip prevents wandering. Due to the increased drilling speed, less heat and wear are generated. The PointTeQ tip design ensures that it remains sharp and has a long lifespan. This drill is suitable for drilling in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron, and plastic. There is low risk of breakage, especially for drills with a diameter under 6 mm as they are made with an extremely flexible core. Its black oxide coating ensures fast chip removal. The HSS PointTeQ spiral drill is manufactured according to DIN 338 standards. The drill type is N (angle of flute) with a 135-degree point angle. It has a cylindrical shank system (the shank has the same diameter as hammer drills) and is intended for use in pillar drills or screwdrivers.
Pack of 10 pieces.

Der Dübelsetzer besteht aus Werkzeugstahl. Der Dübelsetzer erleichtert das Markieren von Dübellöchern. Der Dübelsetzer ermöglicht schnelles und unkompliziertes Markieren von Löchern, was Ihre Arbeit erleichtert. Dübelset mit 4 Stück

Schleifpapier für Holz, Farbe, Lack, Füller und Grundierung. 10 Stück rechteckig mit einer Körnung von 120 und den Maßen 93 mm x 186 mm

Der Dübelsetzer ist aus Werkzeugstahl hergestellt. Mit dem Dübelsetzer lassen sich Dübellöcher einfach markieren. Der Dübelsetzer ermöglicht schnelles und unkompliziertes Markieren von Löchern, was deine Arbeit erleichtert. Dübel-Set mit 4 Teilen

Bosch 2 609 390 591 drill attachment accessory Hole saw adaptor

Schleifblatt, 10 Stück, Delta, Körnung: 120

F355 Best for Coatings and Composites ensures an impressive finish when sanding and grinding abrasive surfaces and composite materials. Blades with silicon carbide abrasive grains ensure precise material removal for professional results. Additionally, the electrostatic, open surface with spaces between the grains ensures uniform dust removal, preventing clogging. The sanding roll is designed for grinding hard materials such as stone and composite materials as well as intermediate sanding during painting work. It is also suitable for sanding and grinding paint, primer, putty, and plastic. Also suitable for precision work on ferrous and non-ferrous materials. F355 Best for Coatings and Composites has a closed antistatic coating to reduce dust adhesion to the workpiece or machine. The abrasive grain is attached using a fully synthetic resin bond that ensures exceptional durability in tough tasks. The product's backing material is F/C paper for optimal sanding properties. The F355 Best for Coatings and Composites abrasive sheet fits all common flat grinders.
Package of 5 pieces.

The C410 Standard for Wood and Paint is characterized by a high material removal rate when hand sanding wood and paint. This universal hand sanding product ensures smooth and consistent material removal thanks to its robust abrasive surface coated with semi-open aluminum oxide grains. In addition, the electrostatically open surface allows for good dust extraction, preventing clogging and ensuring effective sanding and clean surface results. Intended for all types of hand sanding on wood, wood-based materials, veneer as well as solid surfaces, it is suitable for intermediate sanding of lacquer on surfaces and rounded edges. Also ideal for roughening and grinding down paint, varnish, putty as well as roughening and fine grinding feather edges, primer coats or putty. The sheet is covered with strong semi-open aluminum oxide abrasive grains that ensure uniform surface quality. The electrostatically open coating ensures consistent material removal. Additionally the abrasive grain is attached using a fully synthetic resin bond on C-weight backing material which provides good flexibility and optimal grinding properties.The C410 Standard for Wood & Paint Sandpaper Roll can be torn into appropriate pieces making it suitable to use with hand-sanding blocks.
5 m

Cutting disc, for metal, 230 mm

Sägeblatt, für Holz, Plastik, Spanplatten, Sperrholz, Bauplatten und mitteldichte Faserplatten (MDF), 5 Stücke, Länge: 150 mm

Trennscheibe für Stahl, 125 mm

The cup steel brush provides an excellent, fine surface finish. The brush has wavy wire for light to moderately demanding cleaning tasks. It is suitable for removing coatings and rust and for cleaning formwork boards and cladding. This brush is ideal for use on steel surfaces and is also suitable for roughing, sanding, and paint stripping. The bristles are available in different thicknesses depending on how strong the abrasive effect needs to be. Thicker wires are more aggressive and provide a coarser but faster surface finish, while thinner wires provide finer, smoother surface results. It is intended for use with drills with a 6 mm shaft.
Cup Steel Brush - Wavy Wire
Suitable For light to moderately demanding cleaning tasks on small to medium-sized metal surfaces such as removing coatings, rust removal, cleaning formwork boards and facades, roughening,sanding,and paint stripping.

The lightweight mixing tool has a shaft with an external hexagon and mixes materials from top to bottom without splashing. It is suitable for emulsion, high-gloss paint, and wallpaper paste. The tool's hexagonal shaft has a diameter of 8 mm for drills with a 10 mm chuck and the GRW 9 Professional stirring device.
Lightweight mixing attachment
SW 8 mm, chuck 10 mm

X440 Best for Wood and Paint removes material with impressive speed when sanding old paint, varnish or wood surfaces. The strong abrasive grain of semi-loose aluminum oxide guarantees effective sanding. In addition, the backing material is made of robust X-cloth with a quality tape joint that ensures high strength during demanding work. Furthermore, the grains are provided with an electrostatic open surface that ensures uniform dust removal and uninterrupted sanding. This product is intended for sanding wood and painted surfaces and is suitable for smoothing out edges. The product is also ideal for planar grinding of grooves and edges. The abrasive grain is attached using a fully synthetic resin bond, which ensures exceptional durability in tough tasks. The X440 Best for Wood and Paint abrasive belt fits belt sanders.
Package of 3 pieces.

X440 Best for Wood and Paint removes material with impressive speed when sanding old paint, varnish or wood surfaces. The strong abrasive grain of semi-loose aluminum oxide guarantees effective sanding. In addition, the backing material is made of robust X-cloth with a quality belt joint that ensures high strength during demanding work. Furthermore, the grains are provided with an electrostatic, open surface that ensures uniform dust removal and uninterrupted sanding. This product is intended for sanding wood and painted surfaces and is suitable for smoothing out edges. The product is also ideal for planing grooves and edges. The abrasive grain is attached using a fully synthetic resin bond, which ensures exceptional durability in tough tasks. The X440 Best for Wood and Paint sanding belt fits belt sanders.
Package of 3 pieces.

Sägeblatt, für Holz, Plastik, Spanplatten, Sperrholz, Bauplatten und mitteldichte Faserplatten (MDF), 5 Stücke, Länge: 150 mm

Das Erweiterungsadapter-Set enthält eine Reihe von Adaptern, die die Verwendung des Power-Change-Systems von Bosch für Lochsägen von Starrett, Baco und Lenox ermöglichen. Das Set enthält zwei Adapter für Durchmesser 14-30 mm (½" 20UNF-Gewinde) und vier Adapter für Durchmesser 32-210 mm (5/8" 18UNF-Gewinde)

Schleifscheibe, 115 mm, rund, Körnung: hart

It is suitable for use on wood, plastic, and non-ferrous metals and has a cylindrical shaft system. The HSS countersink drill bit with a cylindrical shaft provides smooth countersinking for screws and deburring of holes in soft materials. The ground countersink drill bit is made of HSS (high-speed steel), which provides optimal surface quality for even work on smooth surfaces. Outstanding results in soft materials thanks to the 90-degree cutting edges that continuously function free of splinters and without leaving burrs

The sanding plate with Velcro strap for 125 mm sanding diameter with Velcro strap.