The ground HSS spiral drill bit for drilling through metal with maximum precision. The exposed 135-degree split self-centering tip of the drill head combines active cutting with perfect centering without displacement for maximum precision. With the split tip, it is also unnecessary to mark center points in advance or pilot drill up to 10 mm. This precision-ground drill head, made of HSS (high-speed steel), provides up to 40% faster drilling and up to 50% lower clamping pressure than standard ground HSS cutting edge drill heads. This drill head is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, reduced cast iron, non-ferrous metals and hard plastic. The ground HSS spiral bore head is manufactured according to DIN 338. The bore head is of type N (notch angle) with a 135-degree tip and a diameter tolerance of h8. It has a cylindrical shaft system (the shaft has the same diameter as the bore head) and is intended for use in drilling stands and screwdrivers.
Package with one piece.

Schraubenzieher-Bit

The HSS cobalt spiral drill provides long-lasting performance when drilling in stainless steel. The extended lifespan is due to a 5% cobalt alloy content and fully ground HSS (high-speed steel), which provides outstanding surface quality, wear resistance, and heat protection. Equipped with two cutting edges and two flutes, chips are removed quickly, so the hammer drill lasts even longer. This hammer drill can be used for alloyed and unalloyed steel, stainless steel, cast iron, cast steel, acid- and heat-resistant steel. The HSS spiral drill made of steel is manufactured according to DIN 338. The drilling head is of type N (notch angle) with a 135-degree point angle and a diameter tolerance of h8. Active cutting and perfect centering without displacement are achieved thanks to the two-part tip. This drilling head can be used for alloyed and unalloyed steel, stainless steel, cast iron, cast steel as well as acid- and heat-resistant steels. It has a cylindrical shaft system (the shaft has the same diameter as the drilling head) intended for use in boring stands or screwdrivers.
Package with one piece.

Betonbohrer-Set enthält fünf Bosch Bohrer zum Bohren in Beton, Stahlbeton, Mauerwerk, Stein und Naturstein, mit den Größen 5.0x85, 6.0x100, 6.0x100, 8.0x120 und 10.0x120.

Bosch 5-teiliges Betonbohrer-Set ist eine praktische Auswahl gängiger Durchmesser und Längen für eine Reihe harter Baumaterialien und sorgt dafür, dass Sie für unterschiedliche Bohrarbeiten die passende Bohrergröße zur Hand haben.

Kegelsenker aus Werkzeugstahl mit 10.0 mm Durchmesser, M5-Senkungsspezifikation und 50 mm Gesamtlänge, geeignet für Metalle, Kunststoffe und Holz.

Bosch Kegelsenker, Werkzeugstahl ist für sauberes Senken in Materialien wie Nichteisenmetallen, Kunststoffen einschließlich Styropor, Weichholz und Hartholz sowie Eisenmetallen einschließlich Bewehrungsstahl ausgelegt.

Hammerbohrer-Set mit SDS plus umfasst 7 Teile mit Durchmessern und Längen: 5.0x110, 5.5x110, 6.0x110, 6.0x160, 7.0x160, 8.0x160, 10.0x160 mm.

7-teiliges Hammerbohrer-Set SDS plus ist zum Bohren in Stein, Mauerwerk, Granit, Beton und Stahlbeton ausgelegt, mit einer Auswahl an Bohrergrößen für unterschiedliche Bohrarbeiten.

The CYL-5 drill bit head guarantees extra long lifespan when drilling in concrete and stone. The carbide material developed by Bosch, combined with diamond-ground cutting edges, provides an extremely durable drill bit head. The variable design with 2 flutes and a short, variable pitch significantly reduces flute friction and ensures effective dust removal and less wear. The Bosch Power Grip shank system enables 100% power transfer from the machine to the drill bit head. This means that the power is optimally utilized directly for the drilling task, and reduced power loss means less wear. For drilling fixing holes in concrete, natural stone, and artificial stone materials. The drill bit head is PGM certified by the PGM Masonry Drill Bit Association Board and guarantees tight tolerances, accurate boreholes, and efficient fastening. The drill bit head is compatible with cylindrical shank systems for all powered or battery-powered hammer drills.
Package of 1 piece.

Hammerbohrer-Set SDS plus, 7-teilig, in Durchmessern und Längen: 5.0x110, 6.0x110, 8.0x110, 6.0x160, 8.0x160, 10.0x160, 12.0x160.

7-teiliges Hammerbohrer-Set SDS plus ist spezifiziert für Stein, Mauerwerk, Granit, Beton und Stahlbeton und bietet eine praktische Größenauswahl für unterschiedliche Bohrarbeiten.

It has an external hexagonal shaft of 1/4 inch and is intended for universal mounting of screws with screwdrivers and screw machines. This Extra Hard screwdriver bit is a good choice for versatile use. All tasks can be performed thanks to the bit's modified S2 steel and an optimized heat treatment process, which provides extra hard quality and enables sufficient performance in all tasks. The pointed torsion zone of the bit easily handles maximum circumferential speeds when absorbing force and vibrations during screw assembly, making it suitable for all tasks. Screwdriver bit package extra hard (S) with 3 pieces

PH2 drywall screwdriver bit with depth stop

Bohrer, Spiralbohrer, 2 Stücke, 3.5 mm, zylindrisch, Länge: 70 mm

The CYL-3 drill bit ensures long-lasting performance when drilling in concrete. The wear-resistant drill head is made of a special carbide material developed and produced by Bosch. The material is designed to withstand frequent use and provides extra durability for tasks in concrete. The drill head's efficient U-shape with 2 notches ensures effective dust removal, less friction, reduced heat generation and wear, extending the life of the bit. The drill bit provides long-lasting performance when drilling fastening holes in abrasive materials such as concrete and natural stone. The drill head is PGM certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, precise drilling and efficient fastening. The drill head is compatible with the cylindrical shank system for all powered and battery-powered hammer drills.
Package contains 1 piece.

Schraubendreher-Bit, 3 Stück, Torx, T30, Sechskant, Länge: 25 mm

Hammerbohrer SDS plus mit 6.5 mm Durchmesser, 100 mm Arbeitslänge und 160 mm Gesamtlänge zum Bohren in Stein, Mauerwerk, Granit, Beton und Stahlbeton.

Hammerbohrer SDS plus ist für harte mineralische Materialien spezifiziert und bietet klare Schlüsselmaße, um den passenden Bohrer für Ihre Bohrarbeit auszuwählen.

The CYL-3 drill bit ensures long-lasting performance when drilling in concrete. The wear-resistant drill head is made of a special carbide material developed and produced by Bosch. The material is designed to withstand frequent use and provides extra durability for tasks in concrete. The drill head's efficient U-shape with 2 notches ensures effective dust removal, less friction, reduced heat generation and wear, extending the life of the bit. The drill bit provides long-lasting performance when drilling fastening holes in abrasive materials such as concrete and natural stone. The drill head is PGM certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, precise drilling and efficient fastening. The drill head is compatible with the cylindrical shank system for all powered and battery-powered hammer drills.
Package contains 1 piece.

Fliesenbohrer mit 6.5 mm Durchmesser, 5.0 mm Schaftdurchmesser und 80 mm Gesamtlänge zum Bohren in Stein und Wandfliesen.

Fliesenbohrer ist für Stone | Tiles und Stone | Wall tile spezifiziert, mit 6.5 mm Arbeitsdurchmesser und einem 5.0 mm Schaft für sicheren Sitz in kompatiblen Bohrmaschinen.

Bohrer, Spiralbohrer, 5 mm, zylindrisch, Länge: 86 mm

Bohrer, für Beton, Mauerwerk, Stein, 5 mm, zylindrisch, Länge: 85 mm

The CYL-3 drill bit ensures long-lasting performance when drilling in concrete. The wear-resistant drill bit is made of a special carbide material developed and produced by Bosch. The material is designed to withstand frequent use and provides extra durability for tasks in concrete. The drill bit's efficient U-shape with 2 flutes ensures effective dust removal, less friction, reduced heat development and wear, and extends the life of the drill bit. The drill bit provides long-lasting performance when drilling fastening holes in abrasive materials such as concrete and natural stone. The drill bit is PGM-certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, precise drilling, and efficient fastening. The drill bit is compatible with the cylindrical shank system for all powered and battery-powered hammer drills.
Package with 1 piece.

Bosch 2 609 256 902 Bohrer 1 Stück(e)

Bosch SDS-Quick multi-purpose drill bits

Der CYL-9 Keramikfliesenbohrkopf ist ein Standard-Bohrkopf zum Bohren in Fliesen. Der praktische Bohrkopf eignet sich für trockenes Bohren ohne Kühlung. Das einfache Design ohne Kerben ist besonders geeignet für das Bohren in weichen bis mittelharten Fliesen. Das Bohren erfolgt ohne Schlagfunktion bei niedrigen Geschwindigkeiten. Der Bohrkopf ist kompatibel mit Strom- und batteriebetriebenen Bohrmaschinen mit zylindrischem Schaftsystem.
Paket von 1 Stück.

Tiefenanschlag-Set inklusive Schlüssel.

Bohrer, für Holz, Brad-Point-Bohrer, 4 mm, Länge: 70 mm

Bohrer, für Weichholz, Hartholz, Schlangenbohrer, 8 mm, Sechskant, Länge: 235 mm