Bosch Schrauberbit extra-hart

Abrundfräser, für Hartholz, Schleifmittel, 6 mm, Länge: 53 mm

Bohrer, für Stahlbeton, Stahlbeton, Festbeton, Granit, Gneis, Hammereinsatz, 5.5 mm, SDS-plus, Länge: 165 mm

Bosch Schrauberbit extra-hart

Bosch Schrauberbit extra-hart

Bosch 2 608 522 470 Schraubenziehereinsatz 3 Stück(e)

Bosch 2 608 597 652 Bohrer

Bohrer, für Granit, Festbeton, Gneis, ausgehärteter Stahlbeton, Hammereinsatz, 22 mm, SDS-plus, Länge: 1000 mm

Bosch Schrauberbit extra-hart

Bosch Schrauberbit extra-hart

The CYL-3 drill bit ensures long-lasting performance when drilling in concrete. The wear-resistant drill head is made of a special carbide material developed and produced by Bosch. The material is designed to withstand frequent use and provides extra durability for tasks in concrete. The drill head's efficient U-shape with 2 notches ensures effective dust removal, less friction, reduced heat generation and wear, extending the life of the bit. The drill bit provides long-lasting performance when drilling fastening holes in abrasive materials such as concrete and natural stone. The drill head is PGM certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, precise drilling and efficient fastening. The drill head is compatible with the cylindrical shank system for all powered and battery-powered hammer drills.
Package contains 1 piece.

The CYL-3 drill bit ensures long-lasting performance when drilling in concrete. The wear-resistant drill bit is made of a special carbide material developed and produced by Bosch. The material is designed to withstand frequent use and provides extra durability for tasks in concrete. The drill bit's efficient U-shape with 2 flutes ensures effective dust removal, less friction, reduced heat development and wear, and extends the life of the drill bit. The drill bit provides long-lasting performance when drilling fastening holes in abrasive materials such as concrete and natural stone. The drill bit is PGM-certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, precise drilling, and efficient fastening. The drill bit is compatible with the cylindrical shank system for all powered and battery-powered hammer drills.
Package with 1 piece.

Bohrer, Spiralbohrer, 14 mm, zylindrisch, Länge: 600 mm

The CYL-5 drill bit head guarantees extra long lifespan when drilling in concrete and stone. The carbide material developed by Bosch, combined with diamond-ground cutting edges, provides an extremely durable drill bit head. The variable design with 2 flutes and a short, variable pitch significantly reduces flute friction and ensures effective dust removal and less wear. The Bosch Power Grip shank system enables 100% power transfer from the machine to the drill bit head. This means that the power is optimally utilized directly for drilling tasks, and reduced power loss results in less wear. For drilling fixing holes in concrete, natural stone, and artificial stone materials. The drill bit head is PGM certified by the PGM Masonry Drill Bit Association Board which guarantees tight tolerances, accurate boreholes, and efficient fastening. The drill bit head is compatible with cylindrical shank systems for all powered or battery-powered hammer drills.
Package of 1 piece.

The step drill bit head is made of HSS (high-speed steel) and coated with AlTiN (aluminum titanium nitride). This provides the longest possible lifespan and does not require the use of coolant. Laser-marked numbers in both spiral flutes provide highly visible and durable marking of the hole diameter. In addition, the 3-flat shank prevents slipping in the drill chuck and provides efficient transmission with high torque. The HSS step drill bit head delivers smooth, burr-free drilling in multiple diameters with a single drill bit. It is ideal for deburring, drilling round holes, and enlarging existing ones. It is not necessary to mark center points because the two-part tip provides easy starting. Its CNC-ground spiral flute allows for optimized chip removal and less vibration for smooth drilling. The most optimal cutting and absolute smoothness are ensured thanks to axial and radial clearance grinding. This step drill bit is suitable for use on thin materials such as non-ferrous metals, sheet plastic, sheet steel, plastic, and stainless steel.
9 steps Ø 4-5-6-7-8-9-10-11-12 mm

The drill bit has a hexagonal shaft system and is compatible with all screwdrivers with a 13 mm chuck. The spiral drill bit is suitable for quick and precise drilling when drilling through holes, pre-drilling for rafter nails, and drilling deep dowel holes in wood. The powerful self-feeding tip pulls the bit all the way through, ensuring fast and precise drilling with low power consumption. The optimized low-friction geometry of the bit with solid core ensures straight holes, high chip removal, and higher working speed. The optimized guide edge of the bit and precision-ground head cutting edge produce precise holes. Suitable for use in construction trades, by carpenters and roofers, it is suitable for both softwood and hardwood
Total length 600 mm

The HSS spiral drill with PointTeQ allows for fast drilling in metal thanks to the shape of the tip with PointTeQ. It is quick and easy to start drilling, as the self-centering tip prevents wandering. Due to the increased drilling speed, less heat and wear are generated. The PointTeQ tip design ensures that it remains sharp and has a long lifespan. This drill is suitable for drilling in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron, and plastic. There is low risk of breakage, especially for drills with a diameter under 6 mm since they are made with an extremely flexible core. Its black oxide coating ensures quick chip removal. The HSS PointTeQ spiral drill is manufactured according to DIN 338 standards. The drill type is N (notched angle) with a 135-degree point angle. It has a cylindrical shank system (the shank has the same diameter as hammer drills) and is intended for use in drill stands and screwdrivers.
Package of 10 pieces.

The HSS cobalt spiral drill provides long-lasting performance when drilling in stainless steel. The extended lifespan is due to a 5% cobalt alloy content and fully ground HSS (high-speed steel), which provides outstanding surface quality, wear resistance, and heat protection. Equipped with two cutting edges and two flutes, chips are removed quickly, so the hammer drill lasts even longer. This hammer drill can be used for alloyed and unalloyed steel, stainless steel, cast iron, cast steel, acid- and heat-resistant steel. The HSS spiral drill made of steel is manufactured according to DIN 338. The drilling head is of type N (notch angle) with a 135-degree point angle and a diameter tolerance of h8. Active cutting and perfect centering without displacement are achieved thanks to the two-part tip. This drilling head can be used for alloyed and unalloyed steel, stainless steel, cast iron, cast steel as well as acid- and heat-resistant steels. It has a cylindrical shaft system (the shaft has the same diameter as the drilling head) intended for use in boring stands or screwdrivers.
Package with one piece.

The ground HSS spiral drill bit for drilling through metal with maximum precision. The exposed 135-degree split self-centering tip of the drill head combines active cutting with perfect centering without displacement for maximum precision. With the split tip, it is also unnecessary to mark center points in advance or pilot drill up to 10 mm. This precision-ground drill head, made of HSS (high-speed steel), provides up to 40% faster drilling and up to 50% lower clamping pressure than standard ground HSS cutting edge drill heads. This drill head is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, reduced cast iron, non-ferrous metals and hard plastic. The ground HSS spiral drill bit is manufactured according to DIN 338. The type N (notch angle) of the borehead has a 135-degree tip and a diameter tolerance of h8. It has a cylindrical shaft system (the shaft has the same diameter as the borehead) and is intended for use in drilling stands and screwdrivers.
Package with 10 pieces.

Die Bohrerspitze hat ein sechseckiges Schaftsystem und ist kompatibel mit allen Schraubendrehern mit einem 13 mm Spannfutter. Der Spiralbohrer eignet sich für schnelles und präzises Bohren beim Durchbohren von Löchern, Vorbohren für Sparrennägel und Bohren von tiefen Dübel-Löchern in Holz. Die leistungsstarke selbstfütternde Spitze zieht den Bohrer durch, um schnelles und präzises Bohren bei geringem Stromverbrauch zu gewährleisten. Die optimierte Niedrigreibungsgeometrie des Bits mit massivem Kern sorgt für gerade Löcher, hohe Späneentfernung und höhere Arbeitsgeschwindigkeit. Der optimierte Führungskantenbereich des Bits sowie die präzisionsgeschliffene Kopfschneidekante erzeugen genaue Löcher. Geeignet für den Einsatz im Bauhandwerk, Zimmerer-, Dachdecker-und ist sowohl für Weichholz als auch Hartholz geeignet.Spiralbohrerset mit 6 Stück

Bohrer-Set, für Weichholz, Hartholz, Schlangenbohrer, 6 Stücke, 10 mm, 12 mm, 14 mm, 20 mm ,18mm ,16mm ,Sechskant-Aufnahme,Länge:235mm