Bosch - Seite 120

Bohrer, für Beton, Schneiden von Bewehrungsstahl, 16 mm, SDS-plus, Länge: 300 mm

Bohrersatz, für Metall, Edelstahl, gehärteter Stahl, Gusseisen, 19 Stücke

Bohrersatz, für Beton, 5 Stücke, 5 mm, 6 mm, 7 mm, 8 mm, 5.5 mm, Länge: 85 mm, 100 mm, 120 mm

Diamant-Bohrersatz, für Beton, 3 Stücke, 5 mm, 6 mm, 8 mm, Länge: 100 mm

Bohrer, für Beton, Mauerwerk, 10 Stücke, 5.5 mm, SDS-plus, Länge: 115 mm

Pilotbohrer, Länge: 100 mm

Bohrer, für Beton, Schneiden von Bewehrungsstahl, 32 mm, SDS-plus, Länge: 300 mm

Bohrersatz, 5 Stücke, 5 mm, 6 mm, 8 mm, 10 mm, SDS-plus, Länge: 160 mm, 110 mm

Bohrer, Spiralbohrer, 3 mm, zylindrisch, Länge: 61 mm (Packung mit 10)

Fräs-Bitsatz, für Holz, Kunststoff, Holzfaserplatte, Schleifmittel, Gipskartonplatten, weiche Wandfliesen, 5 Stücke, 3.17 mm, Länge: 70 mm

Der CYL-9 Keramikfliesenbohrkopf ist ein Standard-Bohrkopf zum Bohren in Fliesen. Der praktische Bohrkopf eignet sich für Trockenbohrungen ohne Kühlung. Das einfache Design ohne Kerben ist besonders geeignet für das Bohren in weichen bis mittelharten Fliesen. Bohren ohne Schlagfunktion bei niedrigen Geschwindigkeiten. Der Bohrkopf ist kompatibel mit Strom- und Akkubohrmaschinen mit zylindrischem Schaftsystem. Paket von 1 Stück.

Bosch 2 609 256 907 Bohrer 1 Stück(e)

Bosch HSS Twist Drill Bits PointTeQ

The step drill bit head is made of HSS (high-speed steel) and coated with AlTiN (aluminum titanium nitride). This provides the longest possible lifespan and does not require the use of coolant. Laser-marked numbers in both spiral flutes provide highly visible and durable marking of the hole diameter. In addition, the 3-flat shank prevents slipping in the drill chuck and provides efficient transmission with high torque. The HSS step drill bit head delivers smooth, burr-free drilling in multiple diameters with a single drill bit. It is ideal for deburring, drilling round holes, and enlarging existing ones. It is not necessary to mark center points because the two-part tip provides easy starting. Its CNC-ground spiral flute allows for optimized chip removal and less vibration for smooth drilling. The most optimal cutting and absolute smoothness are ensured thanks to axial and radial clearance grinding. This step drill bit is suitable for use on thin materials such as non-ferrous metals, sheet plastic, sheet steel, plastic, and stainless steel.
9 steps Ø 4-5-6-7-8-9-10-11-12 mm

Bohrer, Spiralbohrer, 4,2 mm, H8, zylindrisch, Länge: 75 mm

The long ground HSS spiral drill bit for drilling deep holes through metal with maximum precision. Its length allows for deep drilling with this long drill head. The exposed 135-degree two-part self-centering tip of the drill head combines active cutting with perfect centering without displacement for maximum precision. With the two-part tip, it is also unnecessary to mark pilot holes in advance or pilot bore up to 10 mm. This precision-ground drill head, made of HSS (high-speed steel), provides up to 40% faster drilling and up to 50% lower clamping pressure than standard ground HSS cutting edge drill heads. The long ground HSS spiral drill bit is manufactured according to DIN 340. The drill head is of type N (not angle) with a 135-degree tip and a diameter tolerance of h8. This drill head is designed for drilling deep holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, reduced cast iron, non-ferrous metals and hard plastic. It has a cylindrical shaft system (the shaft has the same diameter as the drill head) and is intended for use in drilling stands and screwdrivers
Package contains one piece.

The long ground HSS spiral drill bit for drilling deep holes through metal with maximum precision. Its length allows for deep drilling with this long drill head. The drill head's exposed 135-degree two-part self-centering tip combines active cutting with perfect centering without displacement for maximum precision. With the two-part tip, it is also unnecessary to mark pilot holes in advance or pilot bore up to 10 mm. This precision-ground drill head, made of HSS (high-speed steel), provides up to 40% faster drilling and up to 50% lower clamping pressure than standard ground HSS cutting edge drill heads. The long ground HSS spiral drill bit is manufactured according to DIN 340. The drill head is of type N (not angle) with a 135-degree tip and a diameter tolerance of h8. This drill head is designed for drilling deep holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, reduced cast iron, non-ferrous metals and hard plastic. It has a cylindrical shaft system (the shaft has the same diameter as the drill head) and is intended for use in boring stands and screwdrivers
Package with one piece.

The CYL-3 drill bit ensures long-lasting performance when drilling in concrete. The wear-resistant drill bit is made of a special carbide material developed and produced by Bosch. The material is designed to withstand frequent use and provides extra durability for tasks in concrete. The drill bit's efficient U-shape with 2 flutes ensures effective dust removal, less friction, reduced heat development and wear, and extends the life of the drill bit. The drill bit provides long-lasting performance when drilling fastening holes in abrasive materials such as concrete and natural stone. The drill bit is PGM-certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, precise drilling, and efficient fastening. The drill bit is compatible with the cylindrical shank system for all powered and battery-powered hammer drills.
Package with 1 piece.

The drill bit has a hexagonal shaft system and is compatible with all screwdrivers with a 13 mm chuck. The spiral drill bit is suitable for quick and precise drilling when drilling through holes, pre-drilling for rafter nails, and drilling deep dowel holes in wood. The powerful self-feeding tip pulls the bit all the way through, ensuring fast and precise drilling with low power consumption. The optimized low-friction geometry of the bit with solid core ensures straight holes, high chip removal, and higher working speed. The optimized guide edge of the bit and precision-ground head cutting edge produce precise holes. Suitable for use in construction trades, by carpenters and roofers, it is suitable for both softwood and hardwood
Total length 600 mm

Bohrer, für Kunststoff, Buntmetall, Gusseisen, Stahlguß, legierter Stahl, unlegierter Stahl, Spiralbohrer 18 mm zylindrisch

Bohrer, Spiralbohrer, 10,5 mm, zylindrisch, Länge: 133 mm