Bohrer & Bits - Seite 72

Bohrer, für Beton, Mauerwerk, Stein, 8 mm, zylindrisch, Länge: 150 mm

Bohrer, für Beton, Mauerwerk, 8 mm, SDS-plus, Länge: 465 mm

Spiralbohrer für Holz, Brad-Point-Bohrer, 6 mm, Länge: 90 mm

The CYL-3 drill bit ensures long-lasting performance when drilling in concrete. The wear-resistant drill head is made of a special carbide material developed and produced by Bosch. The material is designed to withstand frequent use and provides extra durability for tasks in concrete. The drill head's efficient U-shape with 2 notches ensures effective dust removal, less friction, reduced heat generation and wear, and extends the life of the bit. The drill head provides long-lasting performance when drilling fastening holes in abrasive materials such as concrete and natural stone. The drill head is PGM certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, precise drilling, and efficient fastening. The drill head is compatible with the cylindrical shank system for all powered and battery-powered hammer drills.
Package contains 1 piece.

The ground HSS spiral drill bit for drilling through metal with maximum precision. The exposed 135-degree split self-centering point of the drill head combines active cutting with perfect centering without displacement for maximum precision. With the split tip, it is also unnecessary to mark center points in advance or pilot drill up to 10 mm. This precision-ground drill head, made of HSS (high-speed steel), provides up to 40% faster drilling and up to 50% lower clamping pressure than standard ground HSS cutting edge drill heads. This drill head is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, reduced cast iron, non-ferrous metals and hard plastic. The ground HSS spiral drill bit is manufactured according to DIN 338. The type N (notch angle) of the borehead has a 135-degree point and a diameter tolerance of h8. It has a cylindrical shaft system (the shaft has the same diameter as the borehead) and is intended for use in drilling stands and screwdrivers.
Package with 10 pieces.

Bosch 3-piece Concrete Drill Bit Set SDS-Quick

Bohrer, für Beton, Mauerwerk, 10 mm, SDS-plus, Länge: 465 mm

The SDS max-9 Natural Stone drill bit has a long lifespan in natural stone. The drill bit has two main cutting edges and two robust side bolts, which extend the lifespan. The drill bit is made of a high-quality carbide material that ensures long life and great durability. The vibration-optimized design with 2+2 grooves also ensures optimal power transmission during drilling. The drill bit is intended for drilling in natural stone. The drill bit is PGM certified by the PGM Masonry Drill Bit Association Board and guarantees tight tolerances, accurate drilling, and efficient fastening. It is compatible with all hammer drills with SDS max holders.
Package of 1 piece.

Bohrer, für Beton, Mauerwerk, Hammerbohrer, 16 mm, SDS-plus, Länge: 315 mm

Schraubenzieher und Bohrer-Set, für Holz, Metall, Beton, 76 Teile

Schraubendreher-Bit-Set mit 10 Teilen für 1/4"-Antrieb, mit Phillips-, Pozidriv- und Schlitz-Spitzen in 25 mm Länge sowie einem magnetischen Bithalter.

Bosch Schraubendreher-Bit-Set - 10 Teile enthält PH1, PH2, PH3, PZ1, PZ2, PZ3, SL4.5, SL5.5 und SL8.0 Bits, zur Verwendung mit Bosch PushDrive für vielseitige Schraubarbeiten.

Kernschneider, für Beton, Mauerwerk, Kalkstein, 90 mm, SDS-max, Länge: 550 mm

Bohrer- und Bit-Set in Metall, 35-teiliges Sortiment, geliefert in einem Dispenser von Bosch.

Bosch Drill/Bit Set Metal 35 Pieces Dispenser ist ein kompaktes Bosch-Set, das Bohrer und Bits in einem praktischen Metall-Dispenser zusammenhält – für einfache Aufbewahrung und Handhabung.

Boschbit set w/carabinhage 21 pieces green disp

Lochsäge, für Ziegelsteine, Spanplatte, Weichholz, glasfaserverstärkter Kunststoff, weiche Fliesen, 114 mm

Fräskopf, für Weichholz, Hartholz, Forstnerbohrer, flach, 40 mm, Inbus, Länge: 152 mm

Bohrer, für Beton, Mauerwerk, Stahlbeton, 18 mm, SDS-max, Länge: 540 mm

Bohrer, für Beton, Stahlbeton, Granit, Festbeton, Gneis, Hammereinsatz, 28 mm, SDS-plus, Länge: 450 mm

Bohrer, für Beton, Kunststoff, Stahl, Weichholz, weiche Fliesen, Multimaterial, 12 mm, Länge: 150 mm

Bohrer, für Beton, Kunststoff, Stahl, Weichholz, weiche Fliesen, Multimaterial, 3.5 mm, zylindrisch, Länge: 70 mm

Bohrer, für Beton, Stahlbeton, Granit, Festbeton, Gneis, Hammereinsatz, 6.5 mm, SDS-plus, Länge: 165 mm (Packung mit 10)

Bohrer, Hammereinsatz, 14 mm, SDS-plus, Länge: 265 mm

Bohrer, Hammereinsatz, 14 mm, SDS-plus, Länge: 215 mm

Bohrer, Hammereinsatz, 12 mm, SDS-plus, Länge: 315 mm

Bohrer, für Beton, Mauerwerk, Stahlbeton, 20 mm, SDS-max, Länge: 320 mm