Bohrer & Bits - Seite 48

Bosch TRINBOR M10-M40 HSS-ALTIN

The drill head for step drilling is made of HSS (high-speed steel) and coated with AlTiN (aluminum titanium nitride). This provides the longest possible lifespan and does not require the use of coolant. Laser-marked numbers on both flutes provide highly visible and durable marking of the hole diameter. Additionally, the 3-flat shank prevents slipping in the drill chuck and provides efficient transmission with high torque. The HSS step drill head delivers smooth, burr-free drilling in multiple diameters with a single tool. It is ideal for deburring, drilling round holes, and enlarging existing ones. Center punch marks are not necessary because the split point design allows for easy starting. Its CNC-ground flute enables optimized chip removal and less vibration for smoother drilling. The most optimal cutting edge geometry and absolute smoothness are ensured thanks to axial and radial relief grinding.This step drill head is suitable for use on thin materials such as non-ferrous metals, sheet plastic, sheet steel, plastic, and stainless steel.Threaded core holes for cable glands:Ø 6-8.5-10.5-14.5-18.-23.-30.-38.mm;M10x1 .5-M12x1 .5-M16x1 .5-M20x1 .5-M25x1 .5-M32x1 .5-M40 x 1 , 50Through-holes for cable glands:Ø6 -10 , 512 ,516 -20 ,525 -28 -32 ,535 -40 mm;M10 x 15 M12 x15 M16 x15 M20 x15 M25 xlS M32xlS MOxlS

153,86 € (128,22 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch METALBOR HSS-G 6.4X101MM 10 STK

20,18 € (16,82 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch TRINBOR 4-12MM HSS 9 TRIN

The step drill bit is made of HSS (high-speed steel) and provides a long lifespan when used with coolant. Laser-marked numbers on both flutes provide highly visible and durable marking of the hole diameter. Additionally, the 3-flat shank prevents slipping in the drill chuck and provides efficient transmission with high torque. The HSS step drill head delivers smooth, burr-free drilling in multiple diameters with a single bit. It is ideal for deburring, drilling round holes, and enlarging existing ones. No center punch is needed because the split point allows for easy starting. Its CNC-ground flute enables optimized chip removal and less vibration for smooth drilling. The most optimal cutting edge and absolute smoothness are ensured thanks to axial and radial relief grinding. This step drill bit is suitable for use on thin materials such as non-ferrous metals, sheet plastic, sheet steel, plastic, and stainless steel.
9 steps Ø 4-5-6-7-8-9-10-11-12 mm

41,42 € (34,52 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch DIAMANTBOR TØR 127X150MM 1/2PROF

99,58 € (82,98 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch METALBOR HSS-G S 9.5X125MM

The ground HSS spiral drill bit for drilling through metal with maximum precision. The exposed 135-degree split self-centering tip of the drill head combines active cutting with perfect centering without displacement for maximum precision. With the split tip, it is also unnecessary to mark center points in advance or pilot drill up to 10 mm. This precision-ground drill head, made of HSS (high-speed steel), provides up to 40% faster drilling and up to 50% lower clamping pressure than standard ground HSS cutting edge drill heads. This drill head is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, reduced cast iron, non-ferrous metals and hard plastic. The ground HSS spiral bore head is manufactured according to DIN 338. The bore head is of type N (notch angle) with a 135-degree tip and a diameter tolerance of h8. It has a cylindrical shaft system (the shaft has the same diameter as the bore head) and is intended for use in drilling stands and screwdrivers.
Package with one piece.

7,91 € (6,59 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch METALBOR HSS-CO S 1X34MM 10 STK

The HSS cobalt spiral drill provides long-lasting performance when drilling in stainless steel. The extended lifespan is due to a 5% cobalt alloy content and fully ground HSS (high-speed steel), which provides outstanding surface quality, wear resistance, and heat protection. Equipped with two cutting edges and two flutes, chips are removed quickly so the hammer drill lasts even longer. This hammer drill can be used for alloyed and unalloyed steel, stainless steel, cast iron, cast steel, acid- and heat-resistant steel. The HSS spiral drill made of steel is manufactured according to DIN 338. The drilling head is of type N (notch angle) with a 135-degree point angle and a diameter tolerance of h8. Active cutting and perfect centering without displacement are achieved thanks to the two-part tip. This drilling head can be used for alloyed and unalloyed steel, stainless steel, cast iron, cast steel as well as acid- and heat-resistant steels. It has a cylindrical shaft system (the shaft has the same diameter as the drilling head) intended for use in boring stands or screwdrivers.
Package of 10 pieces.

12,68 € (10,57 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch METALBOR HSS-CO S 4.5X80MM 10STK

The HSS cobalt spiral drill provides long-lasting performance when drilling in stainless steel. The extended lifespan is due to a 5% cobalt alloy content and fully ground HSS (high-speed steel), which provides outstanding surface quality, wear resistance, and heat protection. Equipped with two cutting edges and two flutes, chips are removed quickly so the hammer drill lasts even longer. This hammer drill can be used for alloyed and unalloyed steel, stainless steel, cast iron, cast steel, acid- and heat-resistant steel. The HSS spiral drill made of steel is manufactured according to DIN 338. The drilling head is of type N (notch angle) with a 135-degree point angle and a diameter tolerance of h8. Active cutting and perfect centering without displacement are achieved thanks to the two-part tip. This drilling head can be used for alloyed and unalloyed steel, stainless steel, cast iron, cast steel as well as acid- and heat-resistant steels. It has a cylindrical shaft system (the shaft has the same diameter as the drilling head) intended for use in boring stands or screwdrivers.
Package with 10 pieces.

20,42 € (17,02 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch METALBOR POINTTEC HSS-R 18.0/12MM

Bohrer, für Kunststoff, Buntmetall, Gusseisen, Stahlguß, legierter Stahl, unlegierter Stahl, Spiralbohrer 18 mm zylindrisch

13,55 € (11,29 €)

Bestellware. 7-9 Tage Lieferzeit

Bosch METALBOR HSS-CO S S 4X75MM 10STK

Bohrer, Spiralbohrer, 4 mm, zylindrisch, Länge: 75 mm (Packung mit 10)

17,15 € (14,29 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch METALBOR POINTTEC HSS-R 1.4MM 10STK

The HSS spiral drill with PointTeQ allows for fast drilling in metal thanks to the design of the tip with PointTeQ. It is quick and easy to start drilling as the self-centering tip prevents wandering. Due to the increased drilling speed, less heat and wear are generated. The PointTeQ tip design ensures that it remains sharp and has a long lifespan. This drill is suitable for drilling in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron, and plastic. There is low risk of breakage, especially for drills with a diameter under 6 mm as they are made with an extremely flexible core. Its black oxide coating ensures fast chip removal. The HSS PointTeQ spiral drill is manufactured according to DIN 338 standards. The drill type is N (angle of flute) with a 135-degree point angle. It has a cylindrical shank system (the shank has the same diameter as hammer drills) and is intended for use in pillar drills or screwdrivers.
Pack of 10 pieces.

7,09 € (5,91 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch METALBOR HSS-CO S 2X49MM 10STK

The HSS cobalt spiral drill provides long-lasting performance when drilling in stainless steel. The extended lifespan is due to a 5% cobalt alloy content and fully ground HSS (high-speed steel), which provides outstanding surface quality, wear resistance, and heat protection. Equipped with two cutting edges and two flutes, chips are removed quickly so the hammer drill lasts even longer. This hammer drill can be used for alloyed and unalloyed steel, stainless steel, cast iron, cast steel, acid- and heat-resistant steel. The HSS spiral drill made of steel is manufactured according to DIN 338. The drilling head is of type N (notch angle) with a 135-degree point angle and a diameter tolerance of h8. Active cutting and perfect centering without displacement are achieved thanks to the two-part tip. This drilling head can be used for alloyed and unalloyed steel, stainless steel, cast iron, cast steel as well as acid- and heat-resistant steels. It has a cylindrical shaft system (the shaft has the same diameter as the drilling head) intended for use in boring stands or screwdrivers.
Package of 10 pieces.

12,94 € (10,78 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch BOREPATRON SELVSP 1.5-13MM GSB 13-/16RE

Der selbstspannende Bohrfutter ist für Bosch-Hammerbohrer vorgesehen. Das selbstspannende Bohrfutter ist ein Bosch-System-Bohrfutter mit einer Spannkraft von Ø 1,5 bis 13 mm. Es zieht den Bohrer leicht fest und erfordert keinen Schlüssel. Der selbstspannende Bohrfutter ist für Bosch-Hammerbohrer vorgesehen. Selbstspannendes Bohrfutter, verchromt

41,72 € (34,77 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch TRÆBOR FORSTNER 32MM

Bohrer, für Holz, Weichholz, Hartholz, furniertes Holz, nicht laminierte Spanplatte, Forstnerbohrer 32 mm lang: 90 mm

22,46 € (18,72 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch BITS T10/15/20/25/30 25MM 5 STK

5,86 € (4,88 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch METALBOR POINTTEC HSS-R 12.4MM 5STK

23,47 € (19,56 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch BITS R3 XH L:25MM 3 STK

Es hat eine externe sechseckige Welle von 1/4 Zoll und ist für die universelle Montage von Schrauben mit Schraubendrehern und Schraubmaschinen vorgesehen. Dieser Extra-Hart-Schraubendreher-Bit ist eine gute Wahl für vielseitigen Einsatz. Alle Aufgaben können dank des modifizierten S2-Stahls des Bits und eines optimierten Wärmebehandlungsprozesses ausgeführt werden, der extra harte Qualität bietet und ausreichende Leistung bei allen Aufgaben ermöglicht. Die konische Torsionszone des Bits bewältigt problemlos maximale Umfangsgeschwindigkeiten beim Absorbieren von Kraft und Vibrationen während der Schraubenmontage, was es für alle Aufgaben geeignet macht. Antriebseinheit ISO 1173 C6.3, externes Sechseck mit 1/4"

4,19 € (3,49 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch BIT T8 L:49MM

It has an external hexagonal shaft of 1/4 inch and is intended for universal mounting of screws with screwdrivers and screw machines. This Extra Hard screwdriver bit is a good choice for versatile use. All tasks can be performed thanks to the bit's modified S2 steel and an optimized heat treatment process, which provides extra hard quality and enables sufficient performance in all tasks. The bit's tapered torsion zone easily handles maximum circumferential speeds when absorbing force and vibrations during screw assembly, making it suitable for all tasks

3,34 € (2,78 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch BITS PZ2 L:152MM

7,56 € (6,30 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch HAMMERBOR SDS P-5 26X450MM

Drill bit, for concrete, masonry, hammer bit, 26 mm, SDS-plus, length: 450 mm

54,14 € (45,12 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch HAMMERBOR SDS P-5 24X450MM

Drill bit, for concrete, masonry, hammer bit, 24 mm, SDS-plus, length: 450 mm

48,50 € (40,42 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch TANDKRANSBOREPATR M/ADAPTER SDS-PLUS

The drill chuck with key is a simple and secure solution for attaching drills to all tasks. With uniform clamping force for secure attachment of drills with cylindrical or hexagonal shank. The jaws are easily tightened and loosened with a key, which provides easy handling. Drill chucks with keys are available in different holders (1/2" - 20, 3/8" - 24, 5/8" - 16, B16 and SDS plus) for a wide range of capacities and are compatible with most common drills. See the technical information to learn more about impact resistance or suitability for counterclockwise rotation.
Hammer-resistant design

82,51 € (68,76 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch BITS LIGE 1.6X8.0MM 49MM 3 STK

It has an external hexagonal shaft of 1/4 inch and is intended for universal mounting of screws with screwdrivers and screw machines. This Extra Hard screwdriver bit is a good choice for versatile use. All tasks can be performed thanks to the bit's modified S2 steel and an optimized heat treatment process, which provides extra hard quality, and enables sufficient performance in all tasks. The tapered torsion zone of the bit easily handles maximum circumferential speeds when absorbing force and vibrations during screw assembly, making it suitable for all tasks. Drive unit ISO 1173 E6.3, 1/4" external hexagon

9,31 € (7,76 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch BITS PZ3 L:25MM 25 STK

21,78 € (18,15 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch FILESÆT Ø13X56MM 4 STK

Frässtift-Set zum Freihandfräsen, 3-teiliges Set mit 13.0 mm Durchmesser, 6 mm zylindrischem Schaft und 56 mm Gesamtlänge, geeignet für Holz und Zinn.

Frässtift-Set zum Freihandfräsen, 3-teilig bietet eine kompakte Auswahl an Frässtiften für Fräsarbeiten in Holz (hart/massiv und weich) sowie Eisenmetallen wie Zinn, mit zylindrischem Schaft für stabile Aufnahme.

Durchmesser: 13.0 mm
Schaftdurchmesser: 6 mm
Gesamtlänge: 56 mm
Schaft: zylindrisch

18,79 € (15,66 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch BOR SDS-PLUS Ø15X100X160MM

Hammerbohrer SDS plus mit 15 mm Durchmesser, 100 mm Arbeitslänge und 160 mm Gesamtlänge, geeignet zum Bohren in Stein, Mauerwerk, Granit, Beton und Stahlbeton.

Hammerbohrer SDS plus bietet zuverlässigen Sitz für SDS plus Bohrhämmer und ist für gängige mineralische Baustoffe vorgesehen, mit klaren Größenangaben für die präzise Abstimmung von Werkzeug und Bohrloch.

Durchmesser: 15 mm
Arbeitslänge: 100 mm
Gesamtlänge: 160 mm
Materialien: Stein, Mauerwerk, Granit, Beton, Stahlbeton

8,18 € (6,82 €)

Verfügbar - 6-8 Werktage Lieferzeit

Montag - Freitag:	09:00 - 15:00 Uhr
Samstag, Sonntag & dänischen Feiertagen:	Geschlossen