Alu pex Systeme - Seite 8

Raxofix Adapter mit SC-Contur-Silicium-Bronze-Pressanschluss, Rp-Gewinde: 16, Rp: 12

Prestee PPSU Uponor 25X20X25 mm

PPSU-Kupplung Uponor 25X20 mm

Uponor PPSU Bogen 90° mit einem Durchmesser von 16mm.

Prestee PPSU Uponor 40 x 25 x 40 mm (Maß eines Sanitäranschlusses aus Polyphenylsulfon-Material der Marke Prestee und hergestellt von Uponor)

PPSU-Kupplung Uponor 50X40 mm

Raxofix T-Stück mit SC-Contur-Silicium-Bronze-Presseanschlüssen, Rp-Gewinde d1: 32, Rp: 34, d2: 32

Raxofix Adapter mit SC-Contur für alle Viega-Metallsysteme - Siliziumbronze - PressverbindungenKomponentenEPDM-Dichtelementd1: 25, d2: 22

Raxofix-Kupplung mit SC-Contur-Siliziumbronze - Pressverbindung d1: 32, d2: 32

Flow-optimised press connector system for drinking water installations in acc. with DIN 1988 and DIN 50930-6 as well as heating installations, tested in acc. with DVGW worksheet W 534.Press connectorsSafe and fast processing without calibration of the pipe ends through O-ring-free press technology in all dimensions. In this way, widening or calibration of the pipe-ends becomes superfluous and reduces the assembly times. The interaction between aerodynamic radii and minimal cross-section narrowings ensure the lowest pressure losses in press systems for multilayer pipes. This allows a smaller dimensioning of drinking water installations and reduces the pipeline volume.SC-ConturAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionPipesRaxofix PE-Xc/Al/PE-Xc•dimensionally stable, oxygen-proof in acc. with DIN 4726, greyRaxofix PE-Xc•flexible, blackDimensionsPress connectors and pipes•Raxofix-PE-Xc/Al/PE-Xc: d 16/20/25/32/40/50/63•Raxofix PE-Xc: d 16/20Areas of application PE-Xc/Al/PE-XcDrinking waterHeatingRainwaterCompressed airAreas of application PE-XcRainwaterDrinking waterUse of the system for application areas other than those described here must be agreed with Viega Service Center.Operating conditionsDrinking water installations•Operating temperature max. 70 °C•Operating pressure max. 1.0 MPaHeating installations•Operating temperature max. 80 °C•Operating pressure max. 1.0 MPaIrrelevant of the direction of flow, mixed installations are permitted.NoteThe DVGW test mark is only valid f

Raxofix T-Stück mit SC-Contur- Siliciumbronze-Pressverbindern d1: 25, d2: 20, d3: 25

Raxofix-Kupplung mit SC-Contur-Siliziumbronze-Presseanschluss d1: 40, d2: 32

Raxofix-Kupplung mit SC-Contur-Siliziumbronze-Presseanschluss d1: 20, d2: 16

Raxofix T-Stück mit SC-Contur- Siliciumbronze-Pressverbindern d1: 20, d2: 20, d3: 20

Prestee PPSU Uponor 32X25X25 mm

Geberit Mepla T-Stück mit Innengewinde: d=26mm, Rp=1/2, d1=26mm

Geberit Mepla Adapter mit männlichem Gewinde: d=20mm, R=1/2

Geberit Mepla T-Stück mit Innengewinde: d=26mm, Rp=3/4, d1=26mm

Geberit Mepla Adapter mit Innengewinde: d=50mm, Rp=1 1/2

Geberit Mepla T-Stück, reduziert: d=26mm, d1=26mm, d2=20mm

Geberit Mepla Adapter-Verbindung mit Innengewinde: d=20mm, Rp=1/2, G=3/4

Geberit Mepla Reduzierstück: d=32mm, d1=20mm

Geberit Mepla Reduzierstück: d=50mm, d1=40mm

Geberit Mepla Adapter mit Innengewinde: d=32mm, Rp=1 1/4

Geberit Mepla Kupplung: d=63mm