Alu pex Systeme - Seite 17

Henco 63 x 63 mm PVDF Pressgeradekupplung für Wasser-, Heiz- und Kühlanlagen. Max. 16 bar.

Henco 20 mm x 34 PVDF Pressgerade Übergangsstück für Wasser-, Heiz- und Kühlanlagen. Max. 16 bar.

Henco 20 mm x 12 PVDF press straight female adapter for water-, heating- and cooling installations. Max. 16 bar.

HENCO 20X3/4 VISION Push-gerader männlicher Adapter für Wasser-, Heizungs- und Kühlanlagen, max. 16 bar

Henco 20 mm x 34 PVDF press straight male adapter for water-, heating- and cooling installations. Max. 16 bar.

Henco 40 x 40 mm PVDF Pressbogen 90° für Wasser-, Heizungs- und Kühlanlagen. Max. 16 bar.

Uponor 1029145 Sanitärarmatur Endzufuhr-Koppler

Uponor 1029143 Sanitärarmatur Armaturenanschluss

Uponor 1029141 Sanitärarmatur Armaturenanschluss

Uponor 1013894 Sanitärarmatur Steckkupplung

Uponor 1070525 Sanitärarmatur Elbow

Uponor 1014109 Sanitärverteilerrohr

Uponor 1029137 Sanitärarmatur Armaturenanschluss

Uponor 1046940 Sanitärarmatur Armaturenanschluss

Henco 26 x 34 x 26 mm PVDF press tee for water-, heating- and cooling installations. Max. 16 bar.

Presskupplung Uponor mit Dichtungshülse/Hülse 16X3/4

Henco 26 mm x 34 PVDF press elbow 90° for water-, heating- and cooling installations. Max. 16 bar.

Henco 20 mm x 12 PVDF Pressbogen 90° für Wasser-, Heiz- und Kühlanlagen. Max. 16 bar.

Viega 5318

Used with Roth alu-laserplus pipe and Roth tools

Flow-optimised press connector system for drinking water installations in acc. with DIN 1988 and DIN 50930-6 as well as heating installations, tested in acc. with DVGW worksheet W 534.Press connectorsSafe and fast processing without calibration of the pipe ends through O-ring-free press technology in all dimensions. In this way, widening or calibration of the pipe-ends becomes superfluous and reduces the assembly times. The interaction between aerodynamic radii and minimal cross-section narrowings ensure the lowest pressure losses in press systems for multilayer pipes. This allows a smaller dimensioning of drinking water installations and reduces the pipeline volume.SC-ConturAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionPipesRaxofix PE-Xc/Al/PE-Xc•dimensionally stable, oxygen-proof in acc. with DIN 4726, greyRaxofix PE-Xc•flexible, blackDimensionsPress connectors and pipes•Raxofix-PE-Xc/Al/PE-Xc: d 16/20/25/32/40/50/63•Raxofix PE-Xc: d 16/20Areas of application PE-Xc/Al/PE-XcDrinking waterHeatingRainwaterCompressed airAreas of application PE-XcRainwaterDrinking waterUse of the system for application areas other than those described here must be agreed with Viega Service Center.Operating conditionsDrinking water installations•Operating temperature max. 70 °C•Operating pressure max. 1.0 MPaHeating installations•Operating temperature max. 80 °C•Operating pressure max. 1.0 MPaIrrelevant of the direction of flow, mixed installations are permitted.NoteThe DVGW test mark is only valid f

Raxofix T-piece with SC-Contur- silicium bronze- press connectorsd1: 25, d2: 16, d3: 25

Flow-optimised press connector system for drinking water installations in acc. with DIN 1988 and DIN 50930-6 as well as heating installations, tested in acc. with DVGW worksheet W 534.Press connectorsSafe and fast processing without calibration of the pipe ends through O-ring-free press technology in all dimensions. In this way, widening or calibration of the pipe-ends becomes superfluous and reduces the assembly times. The interaction between aerodynamic radii and minimal cross-section narrowings ensure the lowest pressure losses in press systems for multilayer pipes. This allows a smaller dimensioning of drinking water installations and reduces the pipeline volume.SC-ConturAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionPipesRaxofix PE-Xc/Al/PE-Xc•dimensionally stable, oxygen-proof in acc. with DIN 4726, greyRaxofix PE-Xc•flexible, blackDimensionsPress connectors and pipes•Raxofix-PE-Xc/Al/PE-Xc: d 16/20/25/32/40/50/63•Raxofix PE-Xc: d 16/20Areas of application PE-Xc/Al/PE-XcDrinking waterHeatingRainwaterCompressed airAreas of application PE-XcRainwaterDrinking waterUse of the system for application areas other than those described here must be agreed with Viega Service Center.Operating conditionsDrinking water installations•Operating temperature max. 70 °C•Operating pressure max. 1.0 MPaHeating installations•Operating temperature max. 80 °C•Operating pressure max. 1.0 MPaIrrelevant of the direction of flow, mixed installations are permitted.NoteThe DVGW test mark is only valid f

Raxofix T-piece with SC-Contur- silicium bronze- press connectorsd1: 25, d2: 20, d3: 20

Raxofix Adapter elbow 90° with SC-Contur- silicium bronze- press connection, R-threadd: 32, R: 1