ABB - Seite 11

PK35 Cable Distribution Cabinet 2CEA000042R0134 from ABB A/S

0.

Netzteil, 640 mA, MDRC mit integriertem Drossel und zusätzlichem 30 V DC-Ausgang zur Versorgung einer zweiten Leitung in Verbindung mit einer separaten Drossel mit ABB i-bus® Systemspannung. Mit zweifarbiger Statusanzeige und breitem Eingangsbereich von 85...265 V AC, 50/60 Hz

MS116-1.0 manual motor starter is a compact 45 mm width devices with a rated operational current of Ie = 1.0 A. This device is used to manually switch on and off motors and to protect them reliably and without the need for a fuse from short-circuits, overload and phase failures. The manual motor starter offers a rated service short-circuit breaking capacity Ics = 50 kA at 400 VAC and the trip class 10A. Further features are the build-in disconnect function, temperature compensation, trip-free mechanism and a rotary handle with a clear switch position indication. The manual motor starter is suitable for three- and single-phase applications. Auxiliary contacts, signalling contacts, undervoltage releases, shunt trips, 3-phase bus bars, power in-feed blocks and locking devices for protection against unauthorized changes are available as accessory.

Dreiecksschlüssel mit Kunststoffgriffen

MS116-1.6 manual motor starter is a compact 45 mm width devices with a rated operational current of Ie = 1.6 A. This device is used to manually switch on and off motors and to protect them reliably and without the need for a fuse from short-circuits, overload and phase failures. The manual motor starter offers a rated service short-circuit breaking capacity Ics = 50 kA at 400 VAC and the trip class 10A. Further features are the build-in disconnect function, temperature compensation, trip-free mechanism and a rotary handle with a clear switch position indication. The manual motor starter is suitable for three- and single-phase applications. Auxiliary contacts, signalling contacts, undervoltage releases, shunt trips, 3-phase bus bars, power in-feed blocks and locking devices for protection against unauthorized changes are available as accessory.

The B6-30-10 mini contactor is a compact 3 pole contactor with 1 auxiliary contact and screw terminals. They are ideally suited for applications where reliability is a must and space is at a premium. Mini contactors are used in residential buldings, commercial buildings and industrial applications for the control of single or three-phase loads up to 4 kW (AC-3) and 20 A / 690 V (AC-1) or switching of control signals. Further features are the silent coil, a switch position indication and the integrated possibility for rail or wall mounting.

Block Contactor Accessories

Sicherungsschalter-Lasttrennschalter Liste 1 Ausgang DIN 00 160A 10-95 Produktbeschreibung: Sicherungsliste DIN 00 mit einem Ausgang max.160A, Kabelquerschnitte von10-95m2 Technische Spezifikationen: Anschlussquerschnitt (mm2):10-95 Montagebreite:70mm

Installationssicherheitsschalter, graues Gehäuse, IP 65. Enthält N- und PE-Klemmen, 2 Membran-Kabelverschraubungen, 2 Zugentlastungen, Griff und Hilfskontakte. Rechteckiger schwarzer Wahlschaltergriff.

Frontbedienbarer Schalter-Lasttrennschalter. Typen OT 16...125 enthalten geschützte Klemmen, IP 20.

Auxiliary Contact Block for AF-contactors

ABB 1SAM250000R1004 Notleuchte

System pro M compact S200 miniature circuit breakers are current limiting. They have two different tripping mechanisms, the delayed thermal tripping mechanism for overload protection and the electromechanic tripping mechanism for short circuit protection. They are available in different characteristics (B,C,D,K,Z), configurations (1P,1P+N,2P,3P,3P+N,4P), breaking capacities (up to 6 kA at 230/400 V AC) and rated currents (up to 63A). All MCBs of the product range S200 comply with IEC/EN 60898-1, IEC/EN 60947-2, UL1077 and CSA 22.2 No. 235, allowing the use for residential, commercial and industrial applications. Bottom-fitting auxiliary contact can be mounted on S200 to save 50% space.

Sicherheitsschalter 3-polig, 400V AC23A 30kW AC22A 63A Kunststoffgehäuse IP65 Schwarzer Wahlschalter

Frontbedienbarer Schalter-Lasttrennschalter. Typen OT 16...125 enthalten geschützte Klemmen, IP 20.

Sicherheitsschalter 3-polig, 400V AC23A, 37kW AC22A, 63A Kunststoffgehäuse IP65 Schwarzer Wahlschalter

Die ESB63..N Installationskontaktoren werden verwendet, um ein- und dreiphasige Lasten bis zu 40 A zu steuern und können mit AC- oder DC-Spannungen betrieben werden. Diese Kontaktoren sind für den Einsatz in Haushaltsanwendungen sowie in industriellen Umgebungen konzipiert. Die folgenden Vorteile werden geboten: Geräuschfreier Betrieb, geringer Stromverbrauch und integrierter Überspannungsschutz. Verschiedene Kontaktkombinationen und Zubehörteile sind erhältlich.

AF09 contactors are used for controlling power circuits up to 690 V AC and 220 V DC. They are mainly used for controlling 3-phase motors, non-inductive or slightly inductive loads. AF... contactors include an electronic coil interface accepting a wide control voltage Uc min. ... Uc max. Only four coils cover control voltages between 24...500 V 50/60 Hz or 20...500 V DC. AF contactors can manage large control voltage variations. One coil can be used for different control voltages used worldwide without any coil change. AF contactors have built-in surge protection and do not require additional surge suppressors. The AF... series 1-stack 3-pole contactors are of the block type design. - Main poles and auxiliary contact blocks: 3 main poles, 1 built-in auxiliary contact, front and side-mounted add-on auxiliary contact blocks (mechanically-linked auxiliary contacts compliant with Annex L of IEC 60947-5-1. N.C. mirror contacts compliant with Annex F of IEC 60947-4-1) - Control circuit: AC or DC operated - Accessories: a wide range of accessories is available. Note: AF..-30-..-11 not suitable for a direct control by PLC-output. AF..-30-..-11 contactor type available in some countries: please consult your ABB representative.

Die ESB20..N Installationskontaktoren werden verwendet, um einzelne Lasten bis zu 20 A zu steuern und können mit AC- oder DC-Spannungen betrieben werden. Diese Kontaktoren sind für den Einsatz in Haushaltsanwendungen sowie in industriellen Umgebungen konzipiert. Folgende Vorteile werden geboten: Geräuschfreier Betrieb, geringer Stromverbrauch und integrierter Überspannungsschutz. Verschiedene Kontakt-Kombinationen und Zubehörteile sind erhältlich.

Auxiliary Contact Block for AF-contactors

ABB KNX IP router connects the KNX bus with the Ethernet network. The device uses the KNXnet/IP protocol for communication (Routing and Tunneling).It can be used as a fast line and area coupler. The full filter table for main groups 0-31 is supported.KNX devices can be programmed via the LAN using ETS. For this and further clients 5 Tunneling Server are available.DIN 90X36X64 mm (H x W x D)The IP address can be fixed or can be received from a DHCP server. Power supply via 12..30 V DC or PoE.The KNX Standard Communication (Multicast) can be switched off. In this case, up to 10 IPR/S3.1.1 can communicate using unicast communication.

ABB CP-E 24/0.75 Netzteil & Spannungsumwandler Drinnen 18 W

ABB 6305.0107.1 Trennschalter

MS116-2.5 manual motor starter is a compact 45 mm width devices with a rated operational current of Ie = 2.5 A. This device is used to manually switch on and off motors and to protect them reliably and without the need for a fuse from short-circuits, overload and phase failures. The manual motor starter offers a rated service short-circuit breaking capacity Ics = 50 kA at 400 VAC and the trip class 10A. Further features are the build-in disconnect function, temperature compensation, trip-free mechanism and a rotary handle with a clear switch position indication. The manual motor starter is suitable for three- and single-phase applications. Auxiliary contacts, signalling contacts, undervoltage releases, shunt trips, 3-phase bus bars, power in-feed blocks and locking devices for protection against unauthorized changes are available as accessory.