Waren-Nr.: 3458377

MikroTik GESP+POE-IN - surge protector

Überspannungsschutz

23,98 € 19,98 € exkl. MwSt.
Günstigste Versandoption 6,99 €
Verfügbar - 9-12 Werktage Lieferzeit

You can't buy safety, but you can buy MikroTik devices to keep your setup safe. Take a look at the GESP product line. It consists of a revision of the classic MikroTik GESP surge protector and a device - the GESP+POE-IN, a passive PoE injector with surge protection. Together these two devices offer maximum security and peace of mind.Here's what a typical use-case would be like. You have a mast with some antennas. And some switches on the ground. Put the GESP surge protector up there. It comes sealed inside an improved IP67 weatherproof enclosure. Your antennas are now safe during a lightning storm. Now add the GESP+POE-IN injector below the mast - to protect the switches and to power the antennas.Don't forget about the grounding wire! Secure it to the rackmount, mast, or any other structure that is connected to the ground. For maximum protection, you should use a surge protector on both ends of long cables.These small devices can make all the difference when it comes to lightning strikes or static build-up.The GESP units can usually absorb multiple impacts, but make sure to check their condition after each surge. Just don't make it too tight. You know what they say - hope for the best, prepare for the worst. This small investment can save lots of time and money, so why risk it? Grab a GESP & GESP+POE-IN and put your mind at ease!

Hersteller
Waren-Nr.
3458377
Modell
GESP+POE-IN
EAN
4752224007223
Zum Hersteller:
Produktbeschreibung
MikroTik GESP+POE-IN - Überspannungsschutz
Gerätetyp
Überspannungsschutz - extern
Power Over Ethernet (PoE)
PoE

Allgemein

Gerätetyp
Überspannungsschutz - extern
Power Over Ethernet (PoE)
PoE (IEEE 802.3af)

Stromversorgungsgerät

Spitzenspannung
700 V
Spitzenstromstärke
3000 A

Erweiterung/Konnektivität

Schnittstellen
1 x Gigabit LAN - RJ-45

Verschiedenes

Besonderheiten
15kV ESD-Schutz (Luft), 8 kV ESD-Schutz (Kontakt)
Kennzeichnung
IEEE 802.3af, IEEE 802.3at, IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC 61643-21

Umgebungsbedingungen

Min Betriebstemperatur
-40 °C
Max. Betriebstemperatur
70 °C

Die genannten Informationen und Spezifikationen können vom Hersteller jederzeit und ohne vorherige Ankündigung geändert werden. Die Herstellerabbildungen dienen ausschließlich der Veranschaulichung. Irrtümer und Schreibfehler bleiben vorbehalten. Deutsche Bedienungsanleitungen sind in einigen Fällen ausschließlich digital verfügbar und nicht Bestandteil des Lieferumfangs. Teile des Textes wurden möglicherweise automatisiert erstellt oder maschinell übersetzt und können daher in Einzelfällen missverständlich sein.