The perfect heat pump for the Nordic climate.

In the Nordics, we can experience both scorching hot summers and freezing winters – this model from Qlima is specially designed for both spectrums of weather. It can be used for private homes, but is also particularly suitable for the summer house, where it can maintain a constant temperature of 8 degrees throughout the winter. An air-to-air heat pump comes with a wide range of advantages, but pay particular attention to the following:

• Environmentally friendly
• Good for the indoor climate
• Easy and cheap to install
• Does not require a waterborne radiator

The S 65 series is our A++ platform with a specially adapted heat pump to cope with the Nordic climate. In the S 65 series you get an even higher maximum heating effect than in the S 60 series.
In all our heat pumps, there is a heating cable in the outdoor part so that the heat pump works down to -25 degrees.

Likewise, all models in the S 65 series have wifi control via smartphone.

NOTE: Since the system contains refrigerant, an authorized refrigeration fitter must always be contacted for installation or maintenance. Also note that the tube set and 5-conductor 2.5 mm² cable must be purchased separately.

Sleeve piece for joining two ducts.

88 x 69 x 50 mm.

The shaped piece angles the direction of the channel by 90° on the same wall.

86 x 70 x 115 mm.

End cap- 85 x 68 x 96 x 58 x 48mm.

Gives a neat end to the duct before pipes etc. are led over to the outside part.

Sleeve piece for joining two channels.

88 x 69 x 50 mm.

The shaped piece angles the direction of the channel by 90° on the same wall.

86 x 70 x 115 mm.

The ceiling connection covers and seals the hole in the ceiling.

84 x 66 x 30 x 140 x 110 mm.

A horizontal channel entry in the opposite wall is finished with this fitting, which has a sealing collar.

83 x 68 x 100 mm.

The wall connection covers and seals the hole in the wall.

80 x 83 x 110 x 212 mm.

End cap - 85 x 68 x 96 x 58 x 48mm.

Gives a neat end to the duct before pipes etc. are led over to the outside part.

With Panasonic Cloud, it is quick and easy to connect an air-to-air heat pump to the internet and control all functions directly from a smartphone or tablet via the Panasonic Comfort Cloud app, which can be downloaded from the App Store or Google Play.

Panasonic Comfort Cloud gives the user access to operate a large number of functions in the heat pump themselves and control temperatures, the direction of the air flow due to speed, set a timer for preheating or cooling and receive notifications about errors and maintenance. In addition, the user can also continuously monitor the energy consumption of each individual device, which is displayed in statistical graphs.

It is also possible to include additional devices as well as to create more users with limited access rights, which gives even more possibilities to control the temperature in different rooms in houses, summer houses, small/medium-sized offices and rental properties (up to 200 devices can be connected on 10 different locations - 20 units per location).

The WiFi module is connected in the indoor unit and hidden behind the front panel. This avoids cable clutter and connecting an external power supply.

Panasonic Cloud is compatible with Panasonic air-to-air heat pumps with the suffix: NKE, RKE, SKE, TKE and UKE (note that HZ25-35UKE has built-in WiFi).